diff --git a/hgdemandimport/py3token.py b/hgdemandimport/py3token.py
new file mode 100644
--- /dev/null
+++ b/hgdemandimport/py3token.py
@@ -0,0 +1,160 @@
+"""Token constants (from "token.h")."""
+
+__all__ = ['tok_name', 'ISTERMINAL', 'ISNONTERMINAL', 'ISEOF']
+
+#  This file is automatically generated; please don't muck it up!
+#
+#  To update the symbols in this file, 'cd' to the top directory of
+#  the python source tree after building the interpreter and run:
+#
+#    ./python Lib/token.py
+
+#--start constants--
+ENDMARKER = 0
+NAME = 1
+NUMBER = 2
+STRING = 3
+NEWLINE = 4
+INDENT = 5
+DEDENT = 6
+LPAR = 7
+RPAR = 8
+LSQB = 9
+RSQB = 10
+COLON = 11
+COMMA = 12
+SEMI = 13
+PLUS = 14
+MINUS = 15
+STAR = 16
+SLASH = 17
+VBAR = 18
+AMPER = 19
+LESS = 20
+GREATER = 21
+EQUAL = 22
+DOT = 23
+PERCENT = 24
+LBRACE = 25
+RBRACE = 26
+EQEQUAL = 27
+NOTEQUAL = 28
+LESSEQUAL = 29
+GREATEREQUAL = 30
+TILDE = 31
+CIRCUMFLEX = 32
+LEFTSHIFT = 33
+RIGHTSHIFT = 34
+DOUBLESTAR = 35
+PLUSEQUAL = 36
+MINEQUAL = 37
+STAREQUAL = 38
+SLASHEQUAL = 39
+PERCENTEQUAL = 40
+AMPEREQUAL = 41
+VBAREQUAL = 42
+CIRCUMFLEXEQUAL = 43
+LEFTSHIFTEQUAL = 44
+RIGHTSHIFTEQUAL = 45
+DOUBLESTAREQUAL = 46
+DOUBLESLASH = 47
+DOUBLESLASHEQUAL = 48
+AT = 49
+ATEQUAL = 50
+RARROW = 51
+ELLIPSIS = 52
+# Don't forget to update the table _PyParser_TokenNames in tokenizer.c!
+OP = 53
+ERRORTOKEN = 54
+# These aren't used by the C tokenizer but are needed for tokenize.py
+COMMENT = 55
+NL = 56
+ENCODING = 57
+N_TOKENS = 58
+# Special definitions for cooperation with parser
+NT_OFFSET = 256
+#--end constants--
+
+tok_name = {value: name
+            for name, value in globals().items()
+            if isinstance(value, int) and not name.startswith('_')}
+__all__.extend(tok_name.values())
+
+def ISTERMINAL(x):
+    return x < NT_OFFSET
+
+def ISNONTERMINAL(x):
+    return x >= NT_OFFSET
+
+def ISEOF(x):
+    return x == ENDMARKER
+
+
+def _main():
+    import re
+    import sys
+    args = sys.argv[1:]
+    inFileName = args and args[0] or "Include/token.h"
+    outFileName = "Lib/token.py"
+    if len(args) > 1:
+        outFileName = args[1]
+    try:
+        fp = open(inFileName)
+    except OSError as err:
+        sys.stdout.write("I/O error: %s\n" % str(err))
+        sys.exit(1)
+    with fp:
+        lines = fp.read().split("\n")
+    prog = re.compile(
+        r"#define[ \t][ \t]*([A-Z0-9][A-Z0-9_]*)[ \t][ \t]*([0-9][0-9]*)",
+        re.IGNORECASE)
+    comment_regex = re.compile(
+        r"^\s*/\*\s*(.+?)\s*\*/\s*$",
+        re.IGNORECASE)
+
+    tokens = {}
+    prev_val = None
+    for line in lines:
+        match = prog.match(line)
+        if match:
+            name, val = match.group(1, 2)
+            val = int(val)
+            tokens[val] = {'token': name}          # reverse so we can sort them...
+            prev_val = val
+        else:
+            comment_match = comment_regex.match(line)
+            if comment_match and prev_val is not None:
+                comment = comment_match.group(1)
+                tokens[prev_val]['comment'] = comment
+    keys = sorted(tokens.keys())
+    # load the output skeleton from the target:
+    try:
+        fp = open(outFileName)
+    except OSError as err:
+        sys.stderr.write("I/O error: %s\n" % str(err))
+        sys.exit(2)
+    with fp:
+        format = fp.read().split("\n")
+    try:
+        start = format.index("#--start constants--") + 1
+        end = format.index("#--end constants--")
+    except ValueError:
+        sys.stderr.write("target does not contain format markers")
+        sys.exit(3)
+    lines = []
+    for key in keys:
+        lines.append("%s = %d" % (tokens[key]["token"], key))
+        if "comment" in tokens[key]:
+            lines.append("# %s" % tokens[key]["comment"])
+    format[start:end] = lines
+    try:
+        fp = open(outFileName, 'w')
+    except OSError as err:
+        sys.stderr.write("I/O error: %s\n" % str(err))
+        sys.exit(4)
+    with fp:
+        fp.write("\n".join(format))
+
+
+if __name__ == "__main__":
+    _main()
diff --git a/hgdemandimport/py3tokenize.py b/hgdemandimport/py3tokenize.py
new file mode 100644
--- /dev/null
+++ b/hgdemandimport/py3tokenize.py
@@ -0,0 +1,736 @@
+"""Tokenization help for Python programs.
+
+tokenize(readline) is a generator that breaks a stream of bytes into
+Python tokens.  It decodes the bytes according to PEP-0263 for
+determining source file encoding.
+
+It accepts a readline-like method which is called repeatedly to get the
+next line of input (or b"" for EOF).  It generates 5-tuples with these
+members:
+
+    the token type (see token.py)
+    the token (a string)
+    the starting (row, column) indices of the token (a 2-tuple of ints)
+    the ending (row, column) indices of the token (a 2-tuple of ints)
+    the original line (string)
+
+It is designed to match the working of the Python tokenizer exactly, except
+that it produces COMMENT tokens for comments and gives type OP for all
+operators.  Additionally, all token lists start with an ENCODING token
+which tells you which encoding was used to decode the bytes stream.
+"""
+
+__author__ = 'Ka-Ping Yee <ping@lfw.org>'
+__credits__ = ('GvR, ESR, Tim Peters, Thomas Wouters, Fred Drake, '
+               'Skip Montanaro, Raymond Hettinger, Trent Nelson, '
+               'Michael Foord')
+from builtins import open as _builtin_open
+from codecs import lookup, BOM_UTF8
+import collections
+from io import TextIOWrapper
+from itertools import chain
+import itertools as _itertools
+import re
+import sys
+from token import *
+
+cookie_re = re.compile(r'^[ \t\f]*#.*?coding[:=][ \t]*([-\w.]+)', re.ASCII)
+blank_re = re.compile(br'^[ \t\f]*(?:[#\r\n]|$)', re.ASCII)
+
+import token
+__all__ = token.__all__ + ["tokenize", "detect_encoding",
+                           "untokenize", "TokenInfo"]
+del token
+
+EXACT_TOKEN_TYPES = {
+    '(':   LPAR,
+    ')':   RPAR,
+    '[':   LSQB,
+    ']':   RSQB,
+    ':':   COLON,
+    ',':   COMMA,
+    ';':   SEMI,
+    '+':   PLUS,
+    '-':   MINUS,
+    '*':   STAR,
+    '/':   SLASH,
+    '|':   VBAR,
+    '&':   AMPER,
+    '<':   LESS,
+    '>':   GREATER,
+    '=':   EQUAL,
+    '.':   DOT,
+    '%':   PERCENT,
+    '{':   LBRACE,
+    '}':   RBRACE,
+    '==':  EQEQUAL,
+    '!=':  NOTEQUAL,
+    '<=':  LESSEQUAL,
+    '>=':  GREATEREQUAL,
+    '~':   TILDE,
+    '^':   CIRCUMFLEX,
+    '<<':  LEFTSHIFT,
+    '>>':  RIGHTSHIFT,
+    '**':  DOUBLESTAR,
+    '+=':  PLUSEQUAL,
+    '-=':  MINEQUAL,
+    '*=':  STAREQUAL,
+    '/=':  SLASHEQUAL,
+    '%=':  PERCENTEQUAL,
+    '&=':  AMPEREQUAL,
+    '|=':  VBAREQUAL,
+    '^=':  CIRCUMFLEXEQUAL,
+    '<<=': LEFTSHIFTEQUAL,
+    '>>=': RIGHTSHIFTEQUAL,
+    '**=': DOUBLESTAREQUAL,
+    '//':  DOUBLESLASH,
+    '//=': DOUBLESLASHEQUAL,
+    '...': ELLIPSIS,
+    '->':  RARROW,
+    '@':   AT,
+    '@=':  ATEQUAL,
+}
+
+class TokenInfo(collections.namedtuple('TokenInfo', 'type string start end line')):
+    def __repr__(self):
+        annotated_type = '%d (%s)' % (self.type, tok_name[self.type])
+        return ('TokenInfo(type=%s, string=%r, start=%r, end=%r, line=%r)' %
+                self._replace(type=annotated_type))
+
+    @property
+    def exact_type(self):
+        if self.type == OP and self.string in EXACT_TOKEN_TYPES:
+            return EXACT_TOKEN_TYPES[self.string]
+        else:
+            return self.type
+
+def group(*choices): return '(' + '|'.join(choices) + ')'
+def any(*choices): return group(*choices) + '*'
+def maybe(*choices): return group(*choices) + '?'
+
+# Note: we use unicode matching for names ("\w") but ascii matching for
+# number literals.
+Whitespace = r'[ \f\t]*'
+Comment = r'#[^\r\n]*'
+Ignore = Whitespace + any(r'\\\r?\n' + Whitespace) + maybe(Comment)
+Name = r'\w+'
+
+Hexnumber = r'0[xX](?:_?[0-9a-fA-F])+'
+Binnumber = r'0[bB](?:_?[01])+'
+Octnumber = r'0[oO](?:_?[0-7])+'
+Decnumber = r'(?:0(?:_?0)*|[1-9](?:_?[0-9])*)'
+Intnumber = group(Hexnumber, Binnumber, Octnumber, Decnumber)
+Exponent = r'[eE][-+]?[0-9](?:_?[0-9])*'
+Pointfloat = group(r'[0-9](?:_?[0-9])*\.(?:[0-9](?:_?[0-9])*)?',
+                   r'\.[0-9](?:_?[0-9])*') + maybe(Exponent)
+Expfloat = r'[0-9](?:_?[0-9])*' + Exponent
+Floatnumber = group(Pointfloat, Expfloat)
+Imagnumber = group(r'[0-9](?:_?[0-9])*[jJ]', Floatnumber + r'[jJ]')
+Number = group(Imagnumber, Floatnumber, Intnumber)
+
+# Return the empty string, plus all of the valid string prefixes.
+def _all_string_prefixes():
+    # The valid string prefixes. Only contain the lower case versions,
+    #  and don't contain any permuations (include 'fr', but not
+    #  'rf'). The various permutations will be generated.
+    _valid_string_prefixes = ['b', 'r', 'u', 'f', 'br', 'fr']
+    # if we add binary f-strings, add: ['fb', 'fbr']
+    result = {''}
+    for prefix in _valid_string_prefixes:
+        for t in _itertools.permutations(prefix):
+            # create a list with upper and lower versions of each
+            #  character
+            for u in _itertools.product(*[(c, c.upper()) for c in t]):
+                result.add(''.join(u))
+    return result
+
+def _compile(expr):
+    return re.compile(expr, re.UNICODE)
+
+# Note that since _all_string_prefixes includes the empty string,
+#  StringPrefix can be the empty string (making it optional).
+StringPrefix = group(*_all_string_prefixes())
+
+# Tail end of ' string.
+Single = r"[^'\\]*(?:\\.[^'\\]*)*'"
+# Tail end of " string.
+Double = r'[^"\\]*(?:\\.[^"\\]*)*"'
+# Tail end of ''' string.
+Single3 = r"[^'\\]*(?:(?:\\.|'(?!''))[^'\\]*)*'''"
+# Tail end of """ string.
+Double3 = r'[^"\\]*(?:(?:\\.|"(?!""))[^"\\]*)*"""'
+Triple = group(StringPrefix + "'''", StringPrefix + '"""')
+# Single-line ' or " string.
+String = group(StringPrefix + r"'[^\n'\\]*(?:\\.[^\n'\\]*)*'",
+               StringPrefix + r'"[^\n"\\]*(?:\\.[^\n"\\]*)*"')
+
+# Because of leftmost-then-longest match semantics, be sure to put the
+# longest operators first (e.g., if = came before ==, == would get
+# recognized as two instances of =).
+Operator = group(r"\*\*=?", r">>=?", r"<<=?", r"!=",
+                 r"//=?", r"->",
+                 r"[+\-*/%&@|^=<>]=?",
+                 r"~")
+
+Bracket = '[][(){}]'
+Special = group(r'\r?\n', r'\.\.\.', r'[:;.,@]')
+Funny = group(Operator, Bracket, Special)
+
+PlainToken = group(Number, Funny, String, Name)
+Token = Ignore + PlainToken
+
+# First (or only) line of ' or " string.
+ContStr = group(StringPrefix + r"'[^\n'\\]*(?:\\.[^\n'\\]*)*" +
+                group("'", r'\\\r?\n'),
+                StringPrefix + r'"[^\n"\\]*(?:\\.[^\n"\\]*)*' +
+                group('"', r'\\\r?\n'))
+PseudoExtras = group(r'\\\r?\n|\Z', Comment, Triple)
+PseudoToken = Whitespace + group(PseudoExtras, Number, Funny, ContStr, Name)
+
+# For a given string prefix plus quotes, endpats maps it to a regex
+#  to match the remainder of that string. _prefix can be empty, for
+#  a normal single or triple quoted string (with no prefix).
+endpats = {}
+for _prefix in _all_string_prefixes():
+    endpats[_prefix + "'"] = Single
+    endpats[_prefix + '"'] = Double
+    endpats[_prefix + "'''"] = Single3
+    endpats[_prefix + '"""'] = Double3
+
+# A set of all of the single and triple quoted string prefixes,
+#  including the opening quotes.
+single_quoted = set()
+triple_quoted = set()
+for t in _all_string_prefixes():
+    for u in (t + '"', t + "'"):
+        single_quoted.add(u)
+    for u in (t + '"""', t + "'''"):
+        triple_quoted.add(u)
+
+tabsize = 8
+
+class TokenError(Exception): pass
+
+class StopTokenizing(Exception): pass
+
+
+class Untokenizer:
+
+    def __init__(self):
+        self.tokens = []
+        self.prev_row = 1
+        self.prev_col = 0
+        self.encoding = None
+
+    def add_whitespace(self, start):
+        row, col = start
+        if row < self.prev_row or row == self.prev_row and col < self.prev_col:
+            raise ValueError("start ({},{}) precedes previous end ({},{})"
+                             .format(row, col, self.prev_row, self.prev_col))
+        row_offset = row - self.prev_row
+        if row_offset:
+            self.tokens.append("\\\n" * row_offset)
+            self.prev_col = 0
+        col_offset = col - self.prev_col
+        if col_offset:
+            self.tokens.append(" " * col_offset)
+
+    def untokenize(self, iterable):
+        it = iter(iterable)
+        indents = []
+        startline = False
+        for t in it:
+            if len(t) == 2:
+                self.compat(t, it)
+                break
+            tok_type, token, start, end, line = t
+            if tok_type == ENCODING:
+                self.encoding = token
+                continue
+            if tok_type == ENDMARKER:
+                break
+            if tok_type == INDENT:
+                indents.append(token)
+                continue
+            elif tok_type == DEDENT:
+                indents.pop()
+                self.prev_row, self.prev_col = end
+                continue
+            elif tok_type in (NEWLINE, NL):
+                startline = True
+            elif startline and indents:
+                indent = indents[-1]
+                if start[1] >= len(indent):
+                    self.tokens.append(indent)
+                    self.prev_col = len(indent)
+                startline = False
+            self.add_whitespace(start)
+            self.tokens.append(token)
+            self.prev_row, self.prev_col = end
+            if tok_type in (NEWLINE, NL):
+                self.prev_row += 1
+                self.prev_col = 0
+        return "".join(self.tokens)
+
+    def compat(self, token, iterable):
+        indents = []
+        toks_append = self.tokens.append
+        startline = token[0] in (NEWLINE, NL)
+        prevstring = False
+
+        for tok in chain([token], iterable):
+            toknum, tokval = tok[:2]
+            if toknum == ENCODING:
+                self.encoding = tokval
+                continue
+
+            if toknum in (NAME, NUMBER):
+                tokval += ' '
+
+            # Insert a space between two consecutive strings
+            if toknum == STRING:
+                if prevstring:
+                    tokval = ' ' + tokval
+                prevstring = True
+            else:
+                prevstring = False
+
+            if toknum == INDENT:
+                indents.append(tokval)
+                continue
+            elif toknum == DEDENT:
+                indents.pop()
+                continue
+            elif toknum in (NEWLINE, NL):
+                startline = True
+            elif startline and indents:
+                toks_append(indents[-1])
+                startline = False
+            toks_append(tokval)
+
+
+def untokenize(iterable):
+    """Transform tokens back into Python source code.
+    It returns a bytes object, encoded using the ENCODING
+    token, which is the first token sequence output by tokenize.
+
+    Each element returned by the iterable must be a token sequence
+    with at least two elements, a token number and token value.  If
+    only two tokens are passed, the resulting output is poor.
+
+    Round-trip invariant for full input:
+        Untokenized source will match input source exactly
+
+    Round-trip invariant for limited input:
+        # Output bytes will tokenize back to the input
+        t1 = [tok[:2] for tok in tokenize(f.readline)]
+        newcode = untokenize(t1)
+        readline = BytesIO(newcode).readline
+        t2 = [tok[:2] for tok in tokenize(readline)]
+        assert t1 == t2
+    """
+    ut = Untokenizer()
+    out = ut.untokenize(iterable)
+    if ut.encoding is not None:
+        out = out.encode(ut.encoding)
+    return out
+
+
+def _get_normal_name(orig_enc):
+    """Imitates get_normal_name in tokenizer.c."""
+    # Only care about the first 12 characters.
+    enc = orig_enc[:12].lower().replace("_", "-")
+    if enc == "utf-8" or enc.startswith("utf-8-"):
+        return "utf-8"
+    if enc in ("latin-1", "iso-8859-1", "iso-latin-1") or \
+       enc.startswith(("latin-1-", "iso-8859-1-", "iso-latin-1-")):
+        return "iso-8859-1"
+    return orig_enc
+
+def detect_encoding(readline):
+    """
+    The detect_encoding() function is used to detect the encoding that should
+    be used to decode a Python source file.  It requires one argument, readline,
+    in the same way as the tokenize() generator.
+
+    It will call readline a maximum of twice, and return the encoding used
+    (as a string) and a list of any lines (left as bytes) it has read in.
+
+    It detects the encoding from the presence of a utf-8 bom or an encoding
+    cookie as specified in pep-0263.  If both a bom and a cookie are present,
+    but disagree, a SyntaxError will be raised.  If the encoding cookie is an
+    invalid charset, raise a SyntaxError.  Note that if a utf-8 bom is found,
+    'utf-8-sig' is returned.
+
+    If no encoding is specified, then the default of 'utf-8' will be returned.
+    """
+    try:
+        filename = readline.__self__.name
+    except AttributeError:
+        filename = None
+    bom_found = False
+    encoding = None
+    default = 'utf-8'
+    def read_or_stop():
+        try:
+            return readline()
+        except StopIteration:
+            return b''
+
+    def find_cookie(line):
+        try:
+            # Decode as UTF-8. Either the line is an encoding declaration,
+            # in which case it should be pure ASCII, or it must be UTF-8
+            # per default encoding.
+            line_string = line.decode('utf-8')
+        except UnicodeDecodeError:
+            msg = "invalid or missing encoding declaration"
+            if filename is not None:
+                msg = '{} for {!r}'.format(msg, filename)
+            raise SyntaxError(msg)
+
+        match = cookie_re.match(line_string)
+        if not match:
+            return None
+        encoding = _get_normal_name(match.group(1))
+        try:
+            codec = lookup(encoding)
+        except LookupError:
+            # This behaviour mimics the Python interpreter
+            if filename is None:
+                msg = "unknown encoding: " + encoding
+            else:
+                msg = "unknown encoding for {!r}: {}".format(filename,
+                        encoding)
+            raise SyntaxError(msg)
+
+        if bom_found:
+            if encoding != 'utf-8':
+                # This behaviour mimics the Python interpreter
+                if filename is None:
+                    msg = 'encoding problem: utf-8'
+                else:
+                    msg = 'encoding problem for {!r}: utf-8'.format(filename)
+                raise SyntaxError(msg)
+            encoding += '-sig'
+        return encoding
+
+    first = read_or_stop()
+    if first.startswith(BOM_UTF8):
+        bom_found = True
+        first = first[3:]
+        default = 'utf-8-sig'
+    if not first:
+        return default, []
+
+    encoding = find_cookie(first)
+    if encoding:
+        return encoding, [first]
+    if not blank_re.match(first):
+        return default, [first]
+
+    second = read_or_stop()
+    if not second:
+        return default, [first]
+
+    encoding = find_cookie(second)
+    if encoding:
+        return encoding, [first, second]
+
+    return default, [first, second]
+
+
+def open(filename):
+    """Open a file in read only mode using the encoding detected by
+    detect_encoding().
+    """
+    buffer = _builtin_open(filename, 'rb')
+    try:
+        encoding, lines = detect_encoding(buffer.readline)
+        buffer.seek(0)
+        text = TextIOWrapper(buffer, encoding, line_buffering=True)
+        text.mode = 'r'
+        return text
+    except:
+        buffer.close()
+        raise
+
+
+def tokenize(readline):
+    """
+    The tokenize() generator requires one argument, readline, which
+    must be a callable object which provides the same interface as the
+    readline() method of built-in file objects.  Each call to the function
+    should return one line of input as bytes.  Alternatively, readline
+    can be a callable function terminating with StopIteration:
+        readline = open(myfile, 'rb').__next__  # Example of alternate readline
+
+    The generator produces 5-tuples with these members: the token type; the
+    token string; a 2-tuple (srow, scol) of ints specifying the row and
+    column where the token begins in the source; a 2-tuple (erow, ecol) of
+    ints specifying the row and column where the token ends in the source;
+    and the line on which the token was found.  The line passed is the
+    logical line; continuation lines are included.
+
+    The first token sequence will always be an ENCODING token
+    which tells you which encoding was used to decode the bytes stream.
+    """
+    # This import is here to avoid problems when the itertools module is not
+    # built yet and tokenize is imported.
+    from itertools import chain, repeat
+    encoding, consumed = detect_encoding(readline)
+    rl_gen = iter(readline, b"")
+    empty = repeat(b"")
+    return _tokenize(chain(consumed, rl_gen, empty).__next__, encoding)
+
+
+def _tokenize(readline, encoding):
+    lnum = parenlev = continued = 0
+    numchars = '0123456789'
+    contstr, needcont = '', 0
+    contline = None
+    indents = [0]
+
+    if encoding is not None:
+        if encoding == "utf-8-sig":
+            # BOM will already have been stripped.
+            encoding = "utf-8"
+        yield TokenInfo(ENCODING, encoding, (0, 0), (0, 0), '')
+    last_line = b''
+    line = b''
+    while True:                                # loop over lines in stream
+        try:
+            # We capture the value of the line variable here because
+            # readline uses the empty string '' to signal end of input,
+            # hence `line` itself will always be overwritten at the end
+            # of this loop.
+            last_line = line
+            line = readline()
+        except StopIteration:
+            line = b''
+
+        if encoding is not None:
+            line = line.decode(encoding)
+        lnum += 1
+        pos, max = 0, len(line)
+
+        if contstr:                            # continued string
+            if not line:
+                raise TokenError("EOF in multi-line string", strstart)
+            endmatch = endprog.match(line)
+            if endmatch:
+                pos = end = endmatch.end(0)
+                yield TokenInfo(STRING, contstr + line[:end],
+                       strstart, (lnum, end), contline + line)
+                contstr, needcont = '', 0
+                contline = None
+            elif needcont and line[-2:] != '\\\n' and line[-3:] != '\\\r\n':
+                yield TokenInfo(ERRORTOKEN, contstr + line,
+                           strstart, (lnum, len(line)), contline)
+                contstr = ''
+                contline = None
+                continue
+            else:
+                contstr = contstr + line
+                contline = contline + line
+                continue
+
+        elif parenlev == 0 and not continued:  # new statement
+            if not line: break
+            column = 0
+            while pos < max:                   # measure leading whitespace
+                if line[pos] == ' ':
+                    column += 1
+                elif line[pos] == '\t':
+                    column = (column//tabsize + 1)*tabsize
+                elif line[pos] == '\f':
+                    column = 0
+                else:
+                    break
+                pos += 1
+            if pos == max:
+                break
+
+            if line[pos] in '#\r\n':           # skip comments or blank lines
+                if line[pos] == '#':
+                    comment_token = line[pos:].rstrip('\r\n')
+                    yield TokenInfo(COMMENT, comment_token,
+                           (lnum, pos), (lnum, pos + len(comment_token)), line)
+                    pos += len(comment_token)
+
+                yield TokenInfo(NL, line[pos:],
+                           (lnum, pos), (lnum, len(line)), line)
+                continue
+
+            if column > indents[-1]:           # count indents or dedents
+                indents.append(column)
+                yield TokenInfo(INDENT, line[:pos], (lnum, 0), (lnum, pos), line)
+            while column < indents[-1]:
+                if column not in indents:
+                    raise IndentationError(
+                        "unindent does not match any outer indentation level",
+                        ("<tokenize>", lnum, pos, line))
+                indents = indents[:-1]
+
+                yield TokenInfo(DEDENT, '', (lnum, pos), (lnum, pos), line)
+
+        else:                                  # continued statement
+            if not line:
+                raise TokenError("EOF in multi-line statement", (lnum, 0))
+            continued = 0
+
+        while pos < max:
+            pseudomatch = _compile(PseudoToken).match(line, pos)
+            if pseudomatch:                                # scan for tokens
+                start, end = pseudomatch.span(1)
+                spos, epos, pos = (lnum, start), (lnum, end), end
+                if start == end:
+                    continue
+                token, initial = line[start:end], line[start]
+
+                if (initial in numchars or                  # ordinary number
+                    (initial == '.' and token != '.' and token != '...')):
+                    yield TokenInfo(NUMBER, token, spos, epos, line)
+                elif initial in '\r\n':
+                    if parenlev > 0:
+                        yield TokenInfo(NL, token, spos, epos, line)
+                    else:
+                        yield TokenInfo(NEWLINE, token, spos, epos, line)
+
+                elif initial == '#':
+                    assert not token.endswith("\n")
+                    yield TokenInfo(COMMENT, token, spos, epos, line)
+
+                elif token in triple_quoted:
+                    endprog = _compile(endpats[token])
+                    endmatch = endprog.match(line, pos)
+                    if endmatch:                           # all on one line
+                        pos = endmatch.end(0)
+                        token = line[start:pos]
+                        yield TokenInfo(STRING, token, spos, (lnum, pos), line)
+                    else:
+                        strstart = (lnum, start)           # multiple lines
+                        contstr = line[start:]
+                        contline = line
+                        break
+
+                # Check up to the first 3 chars of the token to see if
+                #  they're in the single_quoted set. If so, they start
+                #  a string.
+                # We're using the first 3, because we're looking for
+                #  "rb'" (for example) at the start of the token. If
+                #  we switch to longer prefixes, this needs to be
+                #  adjusted.
+                # Note that initial == token[:1].
+                # Also note that single quote checking must come after
+                #  triple quote checking (above).
+                elif (initial in single_quoted or
+                      token[:2] in single_quoted or
+                      token[:3] in single_quoted):
+                    if token[-1] == '\n':                  # continued string
+                        strstart = (lnum, start)
+                        # Again, using the first 3 chars of the
+                        #  token. This is looking for the matching end
+                        #  regex for the correct type of quote
+                        #  character. So it's really looking for
+                        #  endpats["'"] or endpats['"'], by trying to
+                        #  skip string prefix characters, if any.
+                        endprog = _compile(endpats.get(initial) or
+                                           endpats.get(token[1]) or
+                                           endpats.get(token[2]))
+                        contstr, needcont = line[start:], 1
+                        contline = line
+                        break
+                    else:                                  # ordinary string
+                        yield TokenInfo(STRING, token, spos, epos, line)
+
+                elif initial.isidentifier():               # ordinary name
+                    yield TokenInfo(NAME, token, spos, epos, line)
+                elif initial == '\\':                      # continued stmt
+                    continued = 1
+                else:
+                    if initial in '([{':
+                        parenlev += 1
+                    elif initial in ')]}':
+                        parenlev -= 1
+                    yield TokenInfo(OP, token, spos, epos, line)
+            else:
+                yield TokenInfo(ERRORTOKEN, line[pos],
+                           (lnum, pos), (lnum, pos+1), line)
+                pos += 1
+
+    # Add an implicit NEWLINE if the input doesn't end in one
+    if last_line and last_line[-1] not in '\r\n':
+        yield TokenInfo(NEWLINE, '', (lnum - 1, len(last_line)), (lnum - 1, len(last_line) + 1), '')
+    for indent in indents[1:]:                 # pop remaining indent levels
+        yield TokenInfo(DEDENT, '', (lnum, 0), (lnum, 0), '')
+    yield TokenInfo(ENDMARKER, '', (lnum, 0), (lnum, 0), '')
+
+
+# An undocumented, backwards compatible, API for all the places in the standard
+# library that expect to be able to use tokenize with strings
+def generate_tokens(readline):
+    return _tokenize(readline, None)
+
+def main():
+    import argparse
+
+    # Helper error handling routines
+    def perror(message):
+        print(message, file=sys.stderr)
+
+    def error(message, filename=None, location=None):
+        if location:
+            args = (filename,) + location + (message,)
+            perror("%s:%d:%d: error: %s" % args)
+        elif filename:
+            perror("%s: error: %s" % (filename, message))
+        else:
+            perror("error: %s" % message)
+        sys.exit(1)
+
+    # Parse the arguments and options
+    parser = argparse.ArgumentParser(prog='python -m tokenize')
+    parser.add_argument(dest='filename', nargs='?',
+                        metavar='filename.py',
+                        help='the file to tokenize; defaults to stdin')
+    parser.add_argument('-e', '--exact', dest='exact', action='store_true',
+                        help='display token names using the exact type')
+    args = parser.parse_args()
+
+    try:
+        # Tokenize the input
+        if args.filename:
+            filename = args.filename
+            with _builtin_open(filename, 'rb') as f:
+                tokens = list(tokenize(f.readline))
+        else:
+            filename = "<stdin>"
+            tokens = _tokenize(sys.stdin.readline, None)
+
+        # Output the tokenization
+        for token in tokens:
+            token_type = token.type
+            if args.exact:
+                token_type = token.exact_type
+            token_range = "%d,%d-%d,%d:" % (token.start + token.end)
+            print("%-20s%-15s%-15r" %
+                  (token_range, tok_name[token_type], token.string))
+    except IndentationError as err:
+        line, column = err.args[1][1:3]
+        error(err.args[0], filename, (line, column))
+    except TokenError as err:
+        line, column = err.args[1]
+        error(err.args[0], filename, (line, column))
+    except SyntaxError as err:
+        error(err, filename)
+    except OSError as err:
+        error(err)
+    except KeyboardInterrupt:
+        print("interrupted\n")
+    except Exception as err:
+        perror("unexpected error: %s" % err)
+        raise
+
+if __name__ == "__main__":
+    main()
diff --git a/tests/test-check-code.t b/tests/test-check-code.t
--- a/tests/test-check-code.t
+++ b/tests/test-check-code.t
@@ -9,6 +9,8 @@
 
   $ testrepohg locate \
   > -X contrib/python-zstandard \
+  > -X hgdemandimport/py3token.py \
+  > -X hgdemandimport/py3tokenize.py \
   > -X hgext/fsmonitor/pywatchman \
   > -X mercurial/thirdparty \
   > | sed 's-\\-/-g' | "$check_code" --warnings --per-file=0 - || false
diff --git a/tests/test-check-pyflakes.t b/tests/test-check-pyflakes.t
--- a/tests/test-check-pyflakes.t
+++ b/tests/test-check-pyflakes.t
@@ -14,6 +14,8 @@
   $ cd "`dirname "$TESTDIR"`"
 
   $ testrepohg locate 'set:**.py or grep("^#!.*python")' \
+  > -X hgdemandimport/py3token.py \
+  > -X hgdemandimport/py3tokenize.py \
   > -X hgext/fsmonitor/pywatchman \
   > -X mercurial/pycompat.py -X contrib/python-zstandard \
   > -X mercurial/thirdparty/cbor \
diff --git a/tests/test-check-pylint.t b/tests/test-check-pylint.t
--- a/tests/test-check-pylint.t
+++ b/tests/test-check-pylint.t
@@ -13,7 +13,7 @@
   $ pylint --rcfile=$TESTTMP/fakerc --disable=all \
   >   --enable=W0102,C0321 \
   >   --reports=no \
-  >   --ignore=thirdparty \
+  >   --ignore=thirdparty,py3token.py,py3tokenize.py \
   >   mercurial hgdemandimport hgext hgext3rd | sed 's/\r$//'
   Using config file *fakerc (glob) (?)
    (?)