diff --git a/hgdemandimport/py3token.py b/hgdemandimport/py3token.py new file mode 100644 --- /dev/null +++ b/hgdemandimport/py3token.py @@ -0,0 +1,160 @@ +"""Token constants (from "token.h").""" + +__all__ = ['tok_name', 'ISTERMINAL', 'ISNONTERMINAL', 'ISEOF'] + +# This file is automatically generated; please don't muck it up! +# +# To update the symbols in this file, 'cd' to the top directory of +# the python source tree after building the interpreter and run: +# +# ./python Lib/token.py + +#--start constants-- +ENDMARKER = 0 +NAME = 1 +NUMBER = 2 +STRING = 3 +NEWLINE = 4 +INDENT = 5 +DEDENT = 6 +LPAR = 7 +RPAR = 8 +LSQB = 9 +RSQB = 10 +COLON = 11 +COMMA = 12 +SEMI = 13 +PLUS = 14 +MINUS = 15 +STAR = 16 +SLASH = 17 +VBAR = 18 +AMPER = 19 +LESS = 20 +GREATER = 21 +EQUAL = 22 +DOT = 23 +PERCENT = 24 +LBRACE = 25 +RBRACE = 26 +EQEQUAL = 27 +NOTEQUAL = 28 +LESSEQUAL = 29 +GREATEREQUAL = 30 +TILDE = 31 +CIRCUMFLEX = 32 +LEFTSHIFT = 33 +RIGHTSHIFT = 34 +DOUBLESTAR = 35 +PLUSEQUAL = 36 +MINEQUAL = 37 +STAREQUAL = 38 +SLASHEQUAL = 39 +PERCENTEQUAL = 40 +AMPEREQUAL = 41 +VBAREQUAL = 42 +CIRCUMFLEXEQUAL = 43 +LEFTSHIFTEQUAL = 44 +RIGHTSHIFTEQUAL = 45 +DOUBLESTAREQUAL = 46 +DOUBLESLASH = 47 +DOUBLESLASHEQUAL = 48 +AT = 49 +ATEQUAL = 50 +RARROW = 51 +ELLIPSIS = 52 +# Don't forget to update the table _PyParser_TokenNames in tokenizer.c! +OP = 53 +ERRORTOKEN = 54 +# These aren't used by the C tokenizer but are needed for tokenize.py +COMMENT = 55 +NL = 56 +ENCODING = 57 +N_TOKENS = 58 +# Special definitions for cooperation with parser +NT_OFFSET = 256 +#--end constants-- + +tok_name = {value: name + for name, value in globals().items() + if isinstance(value, int) and not name.startswith('_')} +__all__.extend(tok_name.values()) + +def ISTERMINAL(x): + return x < NT_OFFSET + +def ISNONTERMINAL(x): + return x >= NT_OFFSET + +def ISEOF(x): + return x == ENDMARKER + + +def _main(): + import re + import sys + args = sys.argv[1:] + inFileName = args and args[0] or "Include/token.h" + outFileName = "Lib/token.py" + if len(args) > 1: + outFileName = args[1] + try: + fp = open(inFileName) + except OSError as err: + sys.stdout.write("I/O error: %s\n" % str(err)) + sys.exit(1) + with fp: + lines = fp.read().split("\n") + prog = re.compile( + r"#define[ \t][ \t]*([A-Z0-9][A-Z0-9_]*)[ \t][ \t]*([0-9][0-9]*)", + re.IGNORECASE) + comment_regex = re.compile( + r"^\s*/\*\s*(.+?)\s*\*/\s*$", + re.IGNORECASE) + + tokens = {} + prev_val = None + for line in lines: + match = prog.match(line) + if match: + name, val = match.group(1, 2) + val = int(val) + tokens[val] = {'token': name} # reverse so we can sort them... + prev_val = val + else: + comment_match = comment_regex.match(line) + if comment_match and prev_val is not None: + comment = comment_match.group(1) + tokens[prev_val]['comment'] = comment + keys = sorted(tokens.keys()) + # load the output skeleton from the target: + try: + fp = open(outFileName) + except OSError as err: + sys.stderr.write("I/O error: %s\n" % str(err)) + sys.exit(2) + with fp: + format = fp.read().split("\n") + try: + start = format.index("#--start constants--") + 1 + end = format.index("#--end constants--") + except ValueError: + sys.stderr.write("target does not contain format markers") + sys.exit(3) + lines = [] + for key in keys: + lines.append("%s = %d" % (tokens[key]["token"], key)) + if "comment" in tokens[key]: + lines.append("# %s" % tokens[key]["comment"]) + format[start:end] = lines + try: + fp = open(outFileName, 'w') + except OSError as err: + sys.stderr.write("I/O error: %s\n" % str(err)) + sys.exit(4) + with fp: + fp.write("\n".join(format)) + + +if __name__ == "__main__": + _main() diff --git a/hgdemandimport/py3tokenize.py b/hgdemandimport/py3tokenize.py new file mode 100644 --- /dev/null +++ b/hgdemandimport/py3tokenize.py @@ -0,0 +1,736 @@ +"""Tokenization help for Python programs. + +tokenize(readline) is a generator that breaks a stream of bytes into +Python tokens. It decodes the bytes according to PEP-0263 for +determining source file encoding. + +It accepts a readline-like method which is called repeatedly to get the +next line of input (or b"" for EOF). It generates 5-tuples with these +members: + + the token type (see token.py) + the token (a string) + the starting (row, column) indices of the token (a 2-tuple of ints) + the ending (row, column) indices of the token (a 2-tuple of ints) + the original line (string) + +It is designed to match the working of the Python tokenizer exactly, except +that it produces COMMENT tokens for comments and gives type OP for all +operators. Additionally, all token lists start with an ENCODING token +which tells you which encoding was used to decode the bytes stream. +""" + +__author__ = 'Ka-Ping Yee ' +__credits__ = ('GvR, ESR, Tim Peters, Thomas Wouters, Fred Drake, ' + 'Skip Montanaro, Raymond Hettinger, Trent Nelson, ' + 'Michael Foord') +from builtins import open as _builtin_open +from codecs import lookup, BOM_UTF8 +import collections +from io import TextIOWrapper +from itertools import chain +import itertools as _itertools +import re +import sys +from token import * + +cookie_re = re.compile(r'^[ \t\f]*#.*?coding[:=][ \t]*([-\w.]+)', re.ASCII) +blank_re = re.compile(br'^[ \t\f]*(?:[#\r\n]|$)', re.ASCII) + +import token +__all__ = token.__all__ + ["tokenize", "detect_encoding", + "untokenize", "TokenInfo"] +del token + +EXACT_TOKEN_TYPES = { + '(': LPAR, + ')': RPAR, + '[': LSQB, + ']': RSQB, + ':': COLON, + ',': COMMA, + ';': SEMI, + '+': PLUS, + '-': MINUS, + '*': STAR, + '/': SLASH, + '|': VBAR, + '&': AMPER, + '<': LESS, + '>': GREATER, + '=': EQUAL, + '.': DOT, + '%': PERCENT, + '{': LBRACE, + '}': RBRACE, + '==': EQEQUAL, + '!=': NOTEQUAL, + '<=': LESSEQUAL, + '>=': GREATEREQUAL, + '~': TILDE, + '^': CIRCUMFLEX, + '<<': LEFTSHIFT, + '>>': RIGHTSHIFT, + '**': DOUBLESTAR, + '+=': PLUSEQUAL, + '-=': MINEQUAL, + '*=': STAREQUAL, + '/=': SLASHEQUAL, + '%=': PERCENTEQUAL, + '&=': AMPEREQUAL, + '|=': VBAREQUAL, + '^=': CIRCUMFLEXEQUAL, + '<<=': LEFTSHIFTEQUAL, + '>>=': RIGHTSHIFTEQUAL, + '**=': DOUBLESTAREQUAL, + '//': DOUBLESLASH, + '//=': DOUBLESLASHEQUAL, + '...': ELLIPSIS, + '->': RARROW, + '@': AT, + '@=': ATEQUAL, +} + +class TokenInfo(collections.namedtuple('TokenInfo', 'type string start end line')): + def __repr__(self): + annotated_type = '%d (%s)' % (self.type, tok_name[self.type]) + return ('TokenInfo(type=%s, string=%r, start=%r, end=%r, line=%r)' % + self._replace(type=annotated_type)) + + @property + def exact_type(self): + if self.type == OP and self.string in EXACT_TOKEN_TYPES: + return EXACT_TOKEN_TYPES[self.string] + else: + return self.type + +def group(*choices): return '(' + '|'.join(choices) + ')' +def any(*choices): return group(*choices) + '*' +def maybe(*choices): return group(*choices) + '?' + +# Note: we use unicode matching for names ("\w") but ascii matching for +# number literals. +Whitespace = r'[ \f\t]*' +Comment = r'#[^\r\n]*' +Ignore = Whitespace + any(r'\\\r?\n' + Whitespace) + maybe(Comment) +Name = r'\w+' + +Hexnumber = r'0[xX](?:_?[0-9a-fA-F])+' +Binnumber = r'0[bB](?:_?[01])+' +Octnumber = r'0[oO](?:_?[0-7])+' +Decnumber = r'(?:0(?:_?0)*|[1-9](?:_?[0-9])*)' +Intnumber = group(Hexnumber, Binnumber, Octnumber, Decnumber) +Exponent = r'[eE][-+]?[0-9](?:_?[0-9])*' +Pointfloat = group(r'[0-9](?:_?[0-9])*\.(?:[0-9](?:_?[0-9])*)?', + r'\.[0-9](?:_?[0-9])*') + maybe(Exponent) +Expfloat = r'[0-9](?:_?[0-9])*' + Exponent +Floatnumber = group(Pointfloat, Expfloat) +Imagnumber = group(r'[0-9](?:_?[0-9])*[jJ]', Floatnumber + r'[jJ]') +Number = group(Imagnumber, Floatnumber, Intnumber) + +# Return the empty string, plus all of the valid string prefixes. +def _all_string_prefixes(): + # The valid string prefixes. Only contain the lower case versions, + # and don't contain any permuations (include 'fr', but not + # 'rf'). The various permutations will be generated. + _valid_string_prefixes = ['b', 'r', 'u', 'f', 'br', 'fr'] + # if we add binary f-strings, add: ['fb', 'fbr'] + result = {''} + for prefix in _valid_string_prefixes: + for t in _itertools.permutations(prefix): + # create a list with upper and lower versions of each + # character + for u in _itertools.product(*[(c, c.upper()) for c in t]): + result.add(''.join(u)) + return result + +def _compile(expr): + return re.compile(expr, re.UNICODE) + +# Note that since _all_string_prefixes includes the empty string, +# StringPrefix can be the empty string (making it optional). +StringPrefix = group(*_all_string_prefixes()) + +# Tail end of ' string. +Single = r"[^'\\]*(?:\\.[^'\\]*)*'" +# Tail end of " string. +Double = r'[^"\\]*(?:\\.[^"\\]*)*"' +# Tail end of ''' string. +Single3 = r"[^'\\]*(?:(?:\\.|'(?!''))[^'\\]*)*'''" +# Tail end of """ string. +Double3 = r'[^"\\]*(?:(?:\\.|"(?!""))[^"\\]*)*"""' +Triple = group(StringPrefix + "'''", StringPrefix + '"""') +# Single-line ' or " string. +String = group(StringPrefix + r"'[^\n'\\]*(?:\\.[^\n'\\]*)*'", + StringPrefix + r'"[^\n"\\]*(?:\\.[^\n"\\]*)*"') + +# Because of leftmost-then-longest match semantics, be sure to put the +# longest operators first (e.g., if = came before ==, == would get +# recognized as two instances of =). +Operator = group(r"\*\*=?", r">>=?", r"<<=?", r"!=", + r"//=?", r"->", + r"[+\-*/%&@|^=<>]=?", + r"~") + +Bracket = '[][(){}]' +Special = group(r'\r?\n', r'\.\.\.', r'[:;.,@]') +Funny = group(Operator, Bracket, Special) + +PlainToken = group(Number, Funny, String, Name) +Token = Ignore + PlainToken + +# First (or only) line of ' or " string. +ContStr = group(StringPrefix + r"'[^\n'\\]*(?:\\.[^\n'\\]*)*" + + group("'", r'\\\r?\n'), + StringPrefix + r'"[^\n"\\]*(?:\\.[^\n"\\]*)*' + + group('"', r'\\\r?\n')) +PseudoExtras = group(r'\\\r?\n|\Z', Comment, Triple) +PseudoToken = Whitespace + group(PseudoExtras, Number, Funny, ContStr, Name) + +# For a given string prefix plus quotes, endpats maps it to a regex +# to match the remainder of that string. _prefix can be empty, for +# a normal single or triple quoted string (with no prefix). +endpats = {} +for _prefix in _all_string_prefixes(): + endpats[_prefix + "'"] = Single + endpats[_prefix + '"'] = Double + endpats[_prefix + "'''"] = Single3 + endpats[_prefix + '"""'] = Double3 + +# A set of all of the single and triple quoted string prefixes, +# including the opening quotes. +single_quoted = set() +triple_quoted = set() +for t in _all_string_prefixes(): + for u in (t + '"', t + "'"): + single_quoted.add(u) + for u in (t + '"""', t + "'''"): + triple_quoted.add(u) + +tabsize = 8 + +class TokenError(Exception): pass + +class StopTokenizing(Exception): pass + + +class Untokenizer: + + def __init__(self): + self.tokens = [] + self.prev_row = 1 + self.prev_col = 0 + self.encoding = None + + def add_whitespace(self, start): + row, col = start + if row < self.prev_row or row == self.prev_row and col < self.prev_col: + raise ValueError("start ({},{}) precedes previous end ({},{})" + .format(row, col, self.prev_row, self.prev_col)) + row_offset = row - self.prev_row + if row_offset: + self.tokens.append("\\\n" * row_offset) + self.prev_col = 0 + col_offset = col - self.prev_col + if col_offset: + self.tokens.append(" " * col_offset) + + def untokenize(self, iterable): + it = iter(iterable) + indents = [] + startline = False + for t in it: + if len(t) == 2: + self.compat(t, it) + break + tok_type, token, start, end, line = t + if tok_type == ENCODING: + self.encoding = token + continue + if tok_type == ENDMARKER: + break + if tok_type == INDENT: + indents.append(token) + continue + elif tok_type == DEDENT: + indents.pop() + self.prev_row, self.prev_col = end + continue + elif tok_type in (NEWLINE, NL): + startline = True + elif startline and indents: + indent = indents[-1] + if start[1] >= len(indent): + self.tokens.append(indent) + self.prev_col = len(indent) + startline = False + self.add_whitespace(start) + self.tokens.append(token) + self.prev_row, self.prev_col = end + if tok_type in (NEWLINE, NL): + self.prev_row += 1 + self.prev_col = 0 + return "".join(self.tokens) + + def compat(self, token, iterable): + indents = [] + toks_append = self.tokens.append + startline = token[0] in (NEWLINE, NL) + prevstring = False + + for tok in chain([token], iterable): + toknum, tokval = tok[:2] + if toknum == ENCODING: + self.encoding = tokval + continue + + if toknum in (NAME, NUMBER): + tokval += ' ' + + # Insert a space between two consecutive strings + if toknum == STRING: + if prevstring: + tokval = ' ' + tokval + prevstring = True + else: + prevstring = False + + if toknum == INDENT: + indents.append(tokval) + continue + elif toknum == DEDENT: + indents.pop() + continue + elif toknum in (NEWLINE, NL): + startline = True + elif startline and indents: + toks_append(indents[-1]) + startline = False + toks_append(tokval) + + +def untokenize(iterable): + """Transform tokens back into Python source code. + It returns a bytes object, encoded using the ENCODING + token, which is the first token sequence output by tokenize. + + Each element returned by the iterable must be a token sequence + with at least two elements, a token number and token value. If + only two tokens are passed, the resulting output is poor. + + Round-trip invariant for full input: + Untokenized source will match input source exactly + + Round-trip invariant for limited input: + # Output bytes will tokenize back to the input + t1 = [tok[:2] for tok in tokenize(f.readline)] + newcode = untokenize(t1) + readline = BytesIO(newcode).readline + t2 = [tok[:2] for tok in tokenize(readline)] + assert t1 == t2 + """ + ut = Untokenizer() + out = ut.untokenize(iterable) + if ut.encoding is not None: + out = out.encode(ut.encoding) + return out + + +def _get_normal_name(orig_enc): + """Imitates get_normal_name in tokenizer.c.""" + # Only care about the first 12 characters. + enc = orig_enc[:12].lower().replace("_", "-") + if enc == "utf-8" or enc.startswith("utf-8-"): + return "utf-8" + if enc in ("latin-1", "iso-8859-1", "iso-latin-1") or \ + enc.startswith(("latin-1-", "iso-8859-1-", "iso-latin-1-")): + return "iso-8859-1" + return orig_enc + +def detect_encoding(readline): + """ + The detect_encoding() function is used to detect the encoding that should + be used to decode a Python source file. It requires one argument, readline, + in the same way as the tokenize() generator. + + It will call readline a maximum of twice, and return the encoding used + (as a string) and a list of any lines (left as bytes) it has read in. + + It detects the encoding from the presence of a utf-8 bom or an encoding + cookie as specified in pep-0263. If both a bom and a cookie are present, + but disagree, a SyntaxError will be raised. If the encoding cookie is an + invalid charset, raise a SyntaxError. Note that if a utf-8 bom is found, + 'utf-8-sig' is returned. + + If no encoding is specified, then the default of 'utf-8' will be returned. + """ + try: + filename = readline.__self__.name + except AttributeError: + filename = None + bom_found = False + encoding = None + default = 'utf-8' + def read_or_stop(): + try: + return readline() + except StopIteration: + return b'' + + def find_cookie(line): + try: + # Decode as UTF-8. Either the line is an encoding declaration, + # in which case it should be pure ASCII, or it must be UTF-8 + # per default encoding. + line_string = line.decode('utf-8') + except UnicodeDecodeError: + msg = "invalid or missing encoding declaration" + if filename is not None: + msg = '{} for {!r}'.format(msg, filename) + raise SyntaxError(msg) + + match = cookie_re.match(line_string) + if not match: + return None + encoding = _get_normal_name(match.group(1)) + try: + codec = lookup(encoding) + except LookupError: + # This behaviour mimics the Python interpreter + if filename is None: + msg = "unknown encoding: " + encoding + else: + msg = "unknown encoding for {!r}: {}".format(filename, + encoding) + raise SyntaxError(msg) + + if bom_found: + if encoding != 'utf-8': + # This behaviour mimics the Python interpreter + if filename is None: + msg = 'encoding problem: utf-8' + else: + msg = 'encoding problem for {!r}: utf-8'.format(filename) + raise SyntaxError(msg) + encoding += '-sig' + return encoding + + first = read_or_stop() + if first.startswith(BOM_UTF8): + bom_found = True + first = first[3:] + default = 'utf-8-sig' + if not first: + return default, [] + + encoding = find_cookie(first) + if encoding: + return encoding, [first] + if not blank_re.match(first): + return default, [first] + + second = read_or_stop() + if not second: + return default, [first] + + encoding = find_cookie(second) + if encoding: + return encoding, [first, second] + + return default, [first, second] + + +def open(filename): + """Open a file in read only mode using the encoding detected by + detect_encoding(). + """ + buffer = _builtin_open(filename, 'rb') + try: + encoding, lines = detect_encoding(buffer.readline) + buffer.seek(0) + text = TextIOWrapper(buffer, encoding, line_buffering=True) + text.mode = 'r' + return text + except: + buffer.close() + raise + + +def tokenize(readline): + """ + The tokenize() generator requires one argument, readline, which + must be a callable object which provides the same interface as the + readline() method of built-in file objects. Each call to the function + should return one line of input as bytes. Alternatively, readline + can be a callable function terminating with StopIteration: + readline = open(myfile, 'rb').__next__ # Example of alternate readline + + The generator produces 5-tuples with these members: the token type; the + token string; a 2-tuple (srow, scol) of ints specifying the row and + column where the token begins in the source; a 2-tuple (erow, ecol) of + ints specifying the row and column where the token ends in the source; + and the line on which the token was found. The line passed is the + logical line; continuation lines are included. + + The first token sequence will always be an ENCODING token + which tells you which encoding was used to decode the bytes stream. + """ + # This import is here to avoid problems when the itertools module is not + # built yet and tokenize is imported. + from itertools import chain, repeat + encoding, consumed = detect_encoding(readline) + rl_gen = iter(readline, b"") + empty = repeat(b"") + return _tokenize(chain(consumed, rl_gen, empty).__next__, encoding) + + +def _tokenize(readline, encoding): + lnum = parenlev = continued = 0 + numchars = '0123456789' + contstr, needcont = '', 0 + contline = None + indents = [0] + + if encoding is not None: + if encoding == "utf-8-sig": + # BOM will already have been stripped. + encoding = "utf-8" + yield TokenInfo(ENCODING, encoding, (0, 0), (0, 0), '') + last_line = b'' + line = b'' + while True: # loop over lines in stream + try: + # We capture the value of the line variable here because + # readline uses the empty string '' to signal end of input, + # hence `line` itself will always be overwritten at the end + # of this loop. + last_line = line + line = readline() + except StopIteration: + line = b'' + + if encoding is not None: + line = line.decode(encoding) + lnum += 1 + pos, max = 0, len(line) + + if contstr: # continued string + if not line: + raise TokenError("EOF in multi-line string", strstart) + endmatch = endprog.match(line) + if endmatch: + pos = end = endmatch.end(0) + yield TokenInfo(STRING, contstr + line[:end], + strstart, (lnum, end), contline + line) + contstr, needcont = '', 0 + contline = None + elif needcont and line[-2:] != '\\\n' and line[-3:] != '\\\r\n': + yield TokenInfo(ERRORTOKEN, contstr + line, + strstart, (lnum, len(line)), contline) + contstr = '' + contline = None + continue + else: + contstr = contstr + line + contline = contline + line + continue + + elif parenlev == 0 and not continued: # new statement + if not line: break + column = 0 + while pos < max: # measure leading whitespace + if line[pos] == ' ': + column += 1 + elif line[pos] == '\t': + column = (column//tabsize + 1)*tabsize + elif line[pos] == '\f': + column = 0 + else: + break + pos += 1 + if pos == max: + break + + if line[pos] in '#\r\n': # skip comments or blank lines + if line[pos] == '#': + comment_token = line[pos:].rstrip('\r\n') + yield TokenInfo(COMMENT, comment_token, + (lnum, pos), (lnum, pos + len(comment_token)), line) + pos += len(comment_token) + + yield TokenInfo(NL, line[pos:], + (lnum, pos), (lnum, len(line)), line) + continue + + if column > indents[-1]: # count indents or dedents + indents.append(column) + yield TokenInfo(INDENT, line[:pos], (lnum, 0), (lnum, pos), line) + while column < indents[-1]: + if column not in indents: + raise IndentationError( + "unindent does not match any outer indentation level", + ("", lnum, pos, line)) + indents = indents[:-1] + + yield TokenInfo(DEDENT, '', (lnum, pos), (lnum, pos), line) + + else: # continued statement + if not line: + raise TokenError("EOF in multi-line statement", (lnum, 0)) + continued = 0 + + while pos < max: + pseudomatch = _compile(PseudoToken).match(line, pos) + if pseudomatch: # scan for tokens + start, end = pseudomatch.span(1) + spos, epos, pos = (lnum, start), (lnum, end), end + if start == end: + continue + token, initial = line[start:end], line[start] + + if (initial in numchars or # ordinary number + (initial == '.' and token != '.' and token != '...')): + yield TokenInfo(NUMBER, token, spos, epos, line) + elif initial in '\r\n': + if parenlev > 0: + yield TokenInfo(NL, token, spos, epos, line) + else: + yield TokenInfo(NEWLINE, token, spos, epos, line) + + elif initial == '#': + assert not token.endswith("\n") + yield TokenInfo(COMMENT, token, spos, epos, line) + + elif token in triple_quoted: + endprog = _compile(endpats[token]) + endmatch = endprog.match(line, pos) + if endmatch: # all on one line + pos = endmatch.end(0) + token = line[start:pos] + yield TokenInfo(STRING, token, spos, (lnum, pos), line) + else: + strstart = (lnum, start) # multiple lines + contstr = line[start:] + contline = line + break + + # Check up to the first 3 chars of the token to see if + # they're in the single_quoted set. If so, they start + # a string. + # We're using the first 3, because we're looking for + # "rb'" (for example) at the start of the token. If + # we switch to longer prefixes, this needs to be + # adjusted. + # Note that initial == token[:1]. + # Also note that single quote checking must come after + # triple quote checking (above). + elif (initial in single_quoted or + token[:2] in single_quoted or + token[:3] in single_quoted): + if token[-1] == '\n': # continued string + strstart = (lnum, start) + # Again, using the first 3 chars of the + # token. This is looking for the matching end + # regex for the correct type of quote + # character. So it's really looking for + # endpats["'"] or endpats['"'], by trying to + # skip string prefix characters, if any. + endprog = _compile(endpats.get(initial) or + endpats.get(token[1]) or + endpats.get(token[2])) + contstr, needcont = line[start:], 1 + contline = line + break + else: # ordinary string + yield TokenInfo(STRING, token, spos, epos, line) + + elif initial.isidentifier(): # ordinary name + yield TokenInfo(NAME, token, spos, epos, line) + elif initial == '\\': # continued stmt + continued = 1 + else: + if initial in '([{': + parenlev += 1 + elif initial in ')]}': + parenlev -= 1 + yield TokenInfo(OP, token, spos, epos, line) + else: + yield TokenInfo(ERRORTOKEN, line[pos], + (lnum, pos), (lnum, pos+1), line) + pos += 1 + + # Add an implicit NEWLINE if the input doesn't end in one + if last_line and last_line[-1] not in '\r\n': + yield TokenInfo(NEWLINE, '', (lnum - 1, len(last_line)), (lnum - 1, len(last_line) + 1), '') + for indent in indents[1:]: # pop remaining indent levels + yield TokenInfo(DEDENT, '', (lnum, 0), (lnum, 0), '') + yield TokenInfo(ENDMARKER, '', (lnum, 0), (lnum, 0), '') + + +# An undocumented, backwards compatible, API for all the places in the standard +# library that expect to be able to use tokenize with strings +def generate_tokens(readline): + return _tokenize(readline, None) + +def main(): + import argparse + + # Helper error handling routines + def perror(message): + print(message, file=sys.stderr) + + def error(message, filename=None, location=None): + if location: + args = (filename,) + location + (message,) + perror("%s:%d:%d: error: %s" % args) + elif filename: + perror("%s: error: %s" % (filename, message)) + else: + perror("error: %s" % message) + sys.exit(1) + + # Parse the arguments and options + parser = argparse.ArgumentParser(prog='python -m tokenize') + parser.add_argument(dest='filename', nargs='?', + metavar='filename.py', + help='the file to tokenize; defaults to stdin') + parser.add_argument('-e', '--exact', dest='exact', action='store_true', + help='display token names using the exact type') + args = parser.parse_args() + + try: + # Tokenize the input + if args.filename: + filename = args.filename + with _builtin_open(filename, 'rb') as f: + tokens = list(tokenize(f.readline)) + else: + filename = "" + tokens = _tokenize(sys.stdin.readline, None) + + # Output the tokenization + for token in tokens: + token_type = token.type + if args.exact: + token_type = token.exact_type + token_range = "%d,%d-%d,%d:" % (token.start + token.end) + print("%-20s%-15s%-15r" % + (token_range, tok_name[token_type], token.string)) + except IndentationError as err: + line, column = err.args[1][1:3] + error(err.args[0], filename, (line, column)) + except TokenError as err: + line, column = err.args[1] + error(err.args[0], filename, (line, column)) + except SyntaxError as err: + error(err, filename) + except OSError as err: + error(err) + except KeyboardInterrupt: + print("interrupted\n") + except Exception as err: + perror("unexpected error: %s" % err) + raise + +if __name__ == "__main__": + main() diff --git a/tests/test-check-code.t b/tests/test-check-code.t --- a/tests/test-check-code.t +++ b/tests/test-check-code.t @@ -9,6 +9,8 @@ $ testrepohg locate \ > -X contrib/python-zstandard \ + > -X hgdemandimport/py3token.py \ + > -X hgdemandimport/py3tokenize.py \ > -X hgext/fsmonitor/pywatchman \ > -X mercurial/thirdparty \ > | sed 's-\\-/-g' | "$check_code" --warnings --per-file=0 - || false diff --git a/tests/test-check-pyflakes.t b/tests/test-check-pyflakes.t --- a/tests/test-check-pyflakes.t +++ b/tests/test-check-pyflakes.t @@ -14,6 +14,8 @@ $ cd "`dirname "$TESTDIR"`" $ testrepohg locate 'set:**.py or grep("^#!.*python")' \ + > -X hgdemandimport/py3token.py \ + > -X hgdemandimport/py3tokenize.py \ > -X hgext/fsmonitor/pywatchman \ > -X mercurial/pycompat.py -X contrib/python-zstandard \ > -X mercurial/thirdparty/cbor \ diff --git a/tests/test-check-pylint.t b/tests/test-check-pylint.t --- a/tests/test-check-pylint.t +++ b/tests/test-check-pylint.t @@ -13,7 +13,7 @@ $ pylint --rcfile=$TESTTMP/fakerc --disable=all \ > --enable=W0102,C0321 \ > --reports=no \ - > --ignore=thirdparty \ + > --ignore=thirdparty,py3token.py,py3tokenize.py \ > mercurial hgdemandimport hgext hgext3rd | sed 's/\r$//' Using config file *fakerc (glob) (?) (?)