| durin42 |
| hg-reviewers |
None of those outputs failed on the CI because dirstate-v2 is not fully tested
yet. This also updates the documentation.
| Automatic diff as part of commit; lint not applicable. |
| Automatic diff as part of commit; unit tests not applicable. |
| Path | Packages | |||
|---|---|---|---|---|
| M | mercurial/helptext/internals/dirstate-v2.txt (2 lines) | |||
| M | tests/test-init.t (16 lines) | |||
| M | tests/test-lfconvert.t (2 lines) | |||
| M | tests/test-lfs-largefiles.t (2 lines) | |||
| M | tests/test-narrow-clone-no-ellipsis.t (2 lines) | |||
| M | tests/test-narrow-clone-stream.t (2 lines) | |||
| M | tests/test-narrow-clone.t (2 lines) | |||
| M | tests/test-narrow-sparse.t (2 lines) | |||
| M | tests/test-phases.t (4 lines) | |||
| M | tests/test-remotefilelog-clone-tree.t (6 lines) | |||
| M | tests/test-remotefilelog-clone.t (6 lines) | |||
| M | tests/test-remotefilelog-log.t (2 lines) | |||
| M | tests/test-repo-compengines.t (8 lines) | |||
| M | tests/test-requires.t (2 lines) | |||
| M | tests/test-revlog-v2.t (2 lines) | |||
| M | tests/test-share-safe.t (24 lines) | |||
| M | tests/test-sparse-requirement.t (6 lines) | |||
| M | tests/test-sqlitestore.t (8 lines) |
| The `.hg/requires` file indicates which of various optional file formats | The `.hg/requires` file indicates which of various optional file formats | ||||
| are used by a given repository. | are used by a given repository. | ||||
| Mercurial aborts when seeing a requirement it does not know about, | Mercurial aborts when seeing a requirement it does not know about, | ||||
| which avoids older version accidentally messing up a respository | which avoids older version accidentally messing up a respository | ||||
| that uses a format that was introduced later. | that uses a format that was introduced later. | ||||
| For versions that do support a format, the presence or absence of | For versions that do support a format, the presence or absence of | ||||
| the corresponding requirement indicates whether to use that format. | the corresponding requirement indicates whether to use that format. | ||||
| When the file contains a `exp-dirstate-v2` line, | When the file contains a `dirstate-v2` line, | ||||
| the `dirstate-v2` format is used. | the `dirstate-v2` format is used. | ||||
| With no such line `dirstate-v1` is used. | With no such line `dirstate-v1` is used. | ||||
| High level description | High level description | ||||
| ---------------------- | ---------------------- | ||||
| Whereas `dirstate-v1` uses a single `.hg/disrtate` file, | Whereas `dirstate-v1` uses a single `.hg/disrtate` file, | ||||
| in `dirstate-v2` that file is a "docket" file | in `dirstate-v2` that file is a "docket" file | ||||
| creating 'local' | creating 'local' | ||||
| $ hg init local | $ hg init local | ||||
| $ checknewrepo local | $ checknewrepo local | ||||
| store created | store created | ||||
| 00changelog.i created | 00changelog.i created | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| testonly-simplestore (reposimplestore !) | testonly-simplestore (reposimplestore !) | ||||
| @@ -0,0 +1,1 @@ | @@ -0,0 +1,1 @@ | ||||
| +this | +this | ||||
| creating repo with format.usestore=false | creating repo with format.usestore=false | ||||
| $ hg --config format.usestore=false init old | $ hg --config format.usestore=false init old | ||||
| $ checknewrepo old | $ checknewrepo old | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| testonly-simplestore (reposimplestore !) | testonly-simplestore (reposimplestore !) | ||||
| sparserevlog | sparserevlog | ||||
| creating repo with format.usefncache=false | creating repo with format.usefncache=false | ||||
| $ hg --config format.usefncache=false init old2 | $ hg --config format.usefncache=false init old2 | ||||
| $ checknewrepo old2 | $ checknewrepo old2 | ||||
| store created | store created | ||||
| 00changelog.i created | 00changelog.i created | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| testonly-simplestore (reposimplestore !) | testonly-simplestore (reposimplestore !) | ||||
| creating repo with format.dotencode=false | creating repo with format.dotencode=false | ||||
| $ hg --config format.dotencode=false init old3 | $ hg --config format.dotencode=false init old3 | ||||
| $ checknewrepo old3 | $ checknewrepo old3 | ||||
| store created | store created | ||||
| 00changelog.i created | 00changelog.i created | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| testonly-simplestore (reposimplestore !) | testonly-simplestore (reposimplestore !) | ||||
| creating repo with format.dotencode=false | creating repo with format.dotencode=false | ||||
| $ hg --config format.generaldelta=false --config format.usegeneraldelta=false --config format.sparse-revlog=no init old4 | $ hg --config format.generaldelta=false --config format.usegeneraldelta=false --config format.sparse-revlog=no init old4 | ||||
| $ checknewrepo old4 | $ checknewrepo old4 | ||||
| store created | store created | ||||
| 00changelog.i created | 00changelog.i created | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| store | store | ||||
| testonly-simplestore (reposimplestore !) | testonly-simplestore (reposimplestore !) | ||||
| test failure | test failure | ||||
| creating 'local/sub/repo' | creating 'local/sub/repo' | ||||
| $ hg init local/sub/repo | $ hg init local/sub/repo | ||||
| $ checknewrepo local/sub/repo | $ checknewrepo local/sub/repo | ||||
| store created | store created | ||||
| 00changelog.i created | 00changelog.i created | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| testonly-simplestore (reposimplestore !) | testonly-simplestore (reposimplestore !) | ||||
| prepare test of init of url configured from paths | prepare test of init of url configured from paths | ||||
| $ echo '[paths]' >> $HGRCPATH | $ echo '[paths]' >> $HGRCPATH | ||||
| $ echo "somewhere = `pwd`/url from paths" >> $HGRCPATH | $ echo "somewhere = `pwd`/url from paths" >> $HGRCPATH | ||||
| $ echo "elsewhere = `pwd`/another paths url" >> $HGRCPATH | $ echo "elsewhere = `pwd`/another paths url" >> $HGRCPATH | ||||
| init should (for consistency with clone) expand the url | init should (for consistency with clone) expand the url | ||||
| $ hg init somewhere | $ hg init somewhere | ||||
| $ checknewrepo "url from paths" | $ checknewrepo "url from paths" | ||||
| store created | store created | ||||
| 00changelog.i created | 00changelog.i created | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| testonly-simplestore (reposimplestore !) | testonly-simplestore (reposimplestore !) | ||||
| verify that clone also expand urls | verify that clone also expand urls | ||||
| $ hg clone somewhere elsewhere | $ hg clone somewhere elsewhere | ||||
| updating to branch default | updating to branch default | ||||
| 0 files updated, 0 files merged, 0 files removed, 0 files unresolved | 0 files updated, 0 files merged, 0 files removed, 0 files unresolved | ||||
| $ checknewrepo "another paths url" | $ checknewrepo "another paths url" | ||||
| store created | store created | ||||
| 00changelog.i created | 00changelog.i created | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| testonly-simplestore (reposimplestore !) | testonly-simplestore (reposimplestore !) | ||||
| alsonormal | alsonormal | ||||
| $ md5sum.py large sub/maybelarge.dat | $ md5sum.py large sub/maybelarge.dat | ||||
| ec87a838931d4d5d2e94a04644788a55 large | ec87a838931d4d5d2e94a04644788a55 large | ||||
| 1276481102f218c981e0324180bafd9f sub/maybelarge.dat | 1276481102f218c981e0324180bafd9f sub/maybelarge.dat | ||||
| "lfconvert" adds 'largefiles' to .hg/requires. | "lfconvert" adds 'largefiles' to .hg/requires. | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| largefiles | largefiles | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| 1 large by size | 1 large by size | ||||
| 0 remove large_by_size.bin | 0 remove large_by_size.bin | ||||
| $ cd nolargefiles | $ cd nolargefiles | ||||
| The requirement is added to the destination repo. | The requirement is added to the destination repo. | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| lfs | lfs | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| adding changesets | adding changesets | ||||
| adding manifests | adding manifests | ||||
| adding file changes | adding file changes | ||||
| added 40 changesets with 1 changes to 1 files | added 40 changesets with 1 changes to 1 files | ||||
| new changesets *:* (glob) | new changesets *:* (glob) | ||||
| $ cd narrow | $ cd narrow | ||||
| $ cat .hg/requires | grep -v generaldelta | $ cat .hg/requires | grep -v generaldelta | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| narrowhg-experimental | narrowhg-experimental | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| testonly-simplestore (reposimplestore !) | testonly-simplestore (reposimplestore !) | ||||
| $ hg tracked | $ hg tracked | ||||
| I path:dir/src/F10 | I path:dir/src/F10 | ||||
| Making sure we have the correct set of requirements | Making sure we have the correct set of requirements | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| dotencode (tree !) | dotencode (tree !) | ||||
| dotencode (flat-fncache !) | dotencode (flat-fncache !) | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache (tree !) | fncache (tree !) | ||||
| fncache (flat-fncache !) | fncache (flat-fncache !) | ||||
| generaldelta | generaldelta | ||||
| narrowhg-experimental | narrowhg-experimental | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| adding changesets | adding changesets | ||||
| adding manifests | adding manifests | ||||
| adding file changes | adding file changes | ||||
| added 3 changesets with 1 changes to 1 files | added 3 changesets with 1 changes to 1 files | ||||
| new changesets *:* (glob) | new changesets *:* (glob) | ||||
| $ cd narrow | $ cd narrow | ||||
| $ cat .hg/requires | grep -v generaldelta | $ cat .hg/requires | grep -v generaldelta | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| narrowhg-experimental | narrowhg-experimental | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| testonly-simplestore (reposimplestore !) | testonly-simplestore (reposimplestore !) | ||||
| inside/f | inside/f | ||||
| XXX: we should have a flag in `hg debugsparse` to list the sparse profile | XXX: we should have a flag in `hg debugsparse` to list the sparse profile | ||||
| $ test -f .hg/sparse | $ test -f .hg/sparse | ||||
| [1] | [1] | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| narrowhg-experimental | narrowhg-experimental | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| ============================= | ============================= | ||||
| Check we deny its usage on older repository | Check we deny its usage on older repository | ||||
| $ hg init no-internal-phase --config format.internal-phase=no | $ hg init no-internal-phase --config format.internal-phase=no | ||||
| $ cd no-internal-phase | $ cd no-internal-phase | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| $ echo X > X | $ echo X > X | ||||
| $ cd .. | $ cd .. | ||||
| Check it works fine with repository that supports it. | Check it works fine with repository that supports it. | ||||
| $ hg init internal-phase --config format.internal-phase=yes | $ hg init internal-phase --config format.internal-phase=yes | ||||
| $ cd internal-phase | $ cd internal-phase | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| internal-phase | internal-phase | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| streaming all changes | streaming all changes | ||||
| 4 files to transfer, 449 bytes of data | 4 files to transfer, 449 bytes of data | ||||
| transferred 449 bytes in * seconds (*/sec) (glob) | transferred 449 bytes in * seconds (*/sec) (glob) | ||||
| searching for changes | searching for changes | ||||
| no changes found | no changes found | ||||
| $ cd shallow | $ cd shallow | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| exp-remotefilelog-repo-req-1 | exp-remotefilelog-repo-req-1 | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| streaming all changes | streaming all changes | ||||
| 5 files to transfer, 1008 bytes of data | 5 files to transfer, 1008 bytes of data | ||||
| transferred 1008 bytes in * seconds (*/sec) (glob) | transferred 1008 bytes in * seconds (*/sec) (glob) | ||||
| searching for changes | searching for changes | ||||
| no changes found | no changes found | ||||
| $ cd shallow2 | $ cd shallow2 | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| exp-remotefilelog-repo-req-1 | exp-remotefilelog-repo-req-1 | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| added 1 changesets with 0 changes to 0 files | added 1 changesets with 0 changes to 0 files | ||||
| new changesets 18d955ee7ba0 | new changesets 18d955ee7ba0 | ||||
| updating to branch default | updating to branch default | ||||
| 1 files updated, 0 files merged, 0 files removed, 0 files unresolved | 1 files updated, 0 files merged, 0 files removed, 0 files unresolved | ||||
| $ ls shallow3/.hg/store/data | $ ls shallow3/.hg/store/data | ||||
| $ cat shallow3/.hg/requires | $ cat shallow3/.hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| exp-remotefilelog-repo-req-1 | exp-remotefilelog-repo-req-1 | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| treemanifest | treemanifest | ||||
| streaming all changes | streaming all changes | ||||
| 2 files to transfer, 227 bytes of data | 2 files to transfer, 227 bytes of data | ||||
| transferred 227 bytes in * seconds (*/sec) (glob) | transferred 227 bytes in * seconds (*/sec) (glob) | ||||
| searching for changes | searching for changes | ||||
| no changes found | no changes found | ||||
| $ cd shallow | $ cd shallow | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| exp-remotefilelog-repo-req-1 | exp-remotefilelog-repo-req-1 | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| streaming all changes | streaming all changes | ||||
| 3 files to transfer, 564 bytes of data | 3 files to transfer, 564 bytes of data | ||||
| transferred 564 bytes in * seconds (*/sec) (glob) | transferred 564 bytes in * seconds (*/sec) (glob) | ||||
| searching for changes | searching for changes | ||||
| no changes found | no changes found | ||||
| $ cd shallow2 | $ cd shallow2 | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| exp-remotefilelog-repo-req-1 | exp-remotefilelog-repo-req-1 | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| added 1 changesets with 0 changes to 0 files | added 1 changesets with 0 changes to 0 files | ||||
| new changesets b292c1e3311f | new changesets b292c1e3311f | ||||
| updating to branch default | updating to branch default | ||||
| 1 files updated, 0 files merged, 0 files removed, 0 files unresolved | 1 files updated, 0 files merged, 0 files removed, 0 files unresolved | ||||
| $ ls shallow3/.hg/store/data | $ ls shallow3/.hg/store/data | ||||
| $ cat shallow3/.hg/requires | $ cat shallow3/.hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| exp-remotefilelog-repo-req-1 | exp-remotefilelog-repo-req-1 | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| streaming all changes | streaming all changes | ||||
| 2 files to transfer, 473 bytes of data | 2 files to transfer, 473 bytes of data | ||||
| transferred 473 bytes in * seconds (*/sec) (glob) | transferred 473 bytes in * seconds (*/sec) (glob) | ||||
| searching for changes | searching for changes | ||||
| no changes found | no changes found | ||||
| $ cd shallow | $ cd shallow | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| exp-remotefilelog-repo-req-1 | exp-remotefilelog-repo-req-1 | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| A new repository uses zlib storage, which doesn't need a requirement | A new repository uses zlib storage, which doesn't need a requirement | ||||
| $ cat << EOF >> $HGRCPATH | $ cat << EOF >> $HGRCPATH | ||||
| > [format] | > [format] | ||||
| > # stabilize test accross variant | > # stabilize test accross variant | ||||
| > revlog-compression=zlib | > revlog-compression=zlib | ||||
| > EOF | > EOF | ||||
| $ hg init default | $ hg init default | ||||
| $ cd default | $ cd default | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| testonly-simplestore (reposimplestore !) | testonly-simplestore (reposimplestore !) | ||||
| with that engine or a requirement | with that engine or a requirement | ||||
| $ cd default | $ cd default | ||||
| $ touch bar | $ touch bar | ||||
| $ hg --config format.revlog-compression=none -q commit -A -m 'add bar with a lot of repeated repeated repeated text' | $ hg --config format.revlog-compression=none -q commit -A -m 'add bar with a lot of repeated repeated repeated text' | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| testonly-simplestore (reposimplestore !) | testonly-simplestore (reposimplestore !) | ||||
| $ hg debugrevlog -c | grep 0x78 | $ hg debugrevlog -c | grep 0x78 | ||||
| 0x78 (x) : 2 (100.00%) | 0x78 (x) : 2 (100.00%) | ||||
| 0x78 (x) : 199 (100.00%) | 0x78 (x) : 199 (100.00%) | ||||
| $ cd .. | $ cd .. | ||||
| #if zstd | #if zstd | ||||
| $ hg --config format.revlog-compression=zstd init zstd | $ hg --config format.revlog-compression=zstd init zstd | ||||
| $ cd zstd | $ cd zstd | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd | revlog-compression-zstd | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| testonly-simplestore (reposimplestore !) | testonly-simplestore (reposimplestore !) | ||||
| user: test | user: test | ||||
| date: Thu Jan 01 00:00:00 1970 +0000 | date: Thu Jan 01 00:00:00 1970 +0000 | ||||
| summary: some-commit | summary: some-commit | ||||
| $ cat none-compression/.hg/requires | $ cat none-compression/.hg/requires | ||||
| dotencode | dotencode | ||||
| exp-compression-none | exp-compression-none | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| testonly-simplestore (reposimplestore !) | testonly-simplestore (reposimplestore !) | ||||
| > EOF | > EOF | ||||
| $ cat > supported/.hg/hgrc <<EOF | $ cat > supported/.hg/hgrc <<EOF | ||||
| > [extensions] | > [extensions] | ||||
| > # enable extension locally | > # enable extension locally | ||||
| > supportlocally = $TESTTMP/supported-locally/supportlocally.py | > supportlocally = $TESTTMP/supported-locally/supportlocally.py | ||||
| > EOF | > EOF | ||||
| $ hg -R supported debugrequirements | $ hg -R supported debugrequirements | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| featuresetup-test | featuresetup-test | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| > [experimental] | > [experimental] | ||||
| > revlogv2 = enable-unstable-format-and-corrupt-my-data | > revlogv2 = enable-unstable-format-and-corrupt-my-data | ||||
| > EOF | > EOF | ||||
| $ hg init new-repo | $ hg init new-repo | ||||
| $ cd new-repo | $ cd new-repo | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| exp-revlogv2.2 | exp-revlogv2.2 | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| > use-persistent-nodemap=no | > use-persistent-nodemap=no | ||||
| > EOF | > EOF | ||||
| prepare source repo | prepare source repo | ||||
| $ hg init source | $ hg init source | ||||
| $ cd source | $ cd source | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| share-safe | share-safe | ||||
| $ cat .hg/store/requires | $ cat .hg/store/requires | ||||
| dotencode | dotencode | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| $ hg debugrequirements | $ hg debugrequirements | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| revlogv1 | revlogv1 | ||||
| share-safe | share-safe | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| $ echo a > a | $ echo a > a | ||||
| $ hg ci -Aqm "added a" | $ hg ci -Aqm "added a" | ||||
| $ echo b > b | $ echo b > b | ||||
| $ hg ci -Aqm "added b" | $ hg ci -Aqm "added b" | ||||
| $ HGEDITOR=cat hg config --shared | $ HGEDITOR=cat hg config --shared | ||||
| abort: repository is not shared; can't use --shared | abort: repository is not shared; can't use --shared | ||||
| [10] | [10] | ||||
| $ cd .. | $ cd .. | ||||
| Create a shared repo and check the requirements are shared and read correctly | Create a shared repo and check the requirements are shared and read correctly | ||||
| $ hg share source shared1 | $ hg share source shared1 | ||||
| updating working directory | updating working directory | ||||
| 2 files updated, 0 files merged, 0 files removed, 0 files unresolved | 2 files updated, 0 files merged, 0 files removed, 0 files unresolved | ||||
| $ cd shared1 | $ cd shared1 | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| share-safe | share-safe | ||||
| shared | shared | ||||
| $ hg debugrequirements -R ../source | $ hg debugrequirements -R ../source | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| revlogv1 | revlogv1 | ||||
| share-safe | share-safe | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| $ hg debugrequirements | $ hg debugrequirements | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| revlogv1 | revlogv1 | ||||
| share-safe | share-safe | ||||
| shared | shared | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| Test that upgrading using debugupgraderepo works | Test that upgrading using debugupgraderepo works | ||||
| ================================================= | ================================================= | ||||
| $ hg init non-share-safe --config format.use-share-safe=false | $ hg init non-share-safe --config format.use-share-safe=false | ||||
| $ cd non-share-safe | $ cd non-share-safe | ||||
| $ hg debugrequirements | $ hg debugrequirements | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| $ echo foo > foo | $ echo foo > foo | ||||
| $ hg ci -Aqm 'added foo' | $ hg ci -Aqm 'added foo' | ||||
| $ echo bar > bar | $ echo bar > bar | ||||
| $ hg ci -Aqm 'added bar' | $ hg ci -Aqm 'added bar' | ||||
| Create a share before upgrading | Create a share before upgrading | ||||
| $ cd .. | $ cd .. | ||||
| $ hg share non-share-safe nss-share | $ hg share non-share-safe nss-share | ||||
| updating working directory | updating working directory | ||||
| 2 files updated, 0 files merged, 0 files removed, 0 files unresolved | 2 files updated, 0 files merged, 0 files removed, 0 files unresolved | ||||
| $ hg debugrequirements -R nss-share | $ hg debugrequirements -R nss-share | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| revlogv1 | revlogv1 | ||||
| shared | shared | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| $ cd non-share-safe | $ cd non-share-safe | ||||
| creating temporary repository to stage upgraded data: $TESTTMP/non-share-safe/.hg/upgrade.* (glob) | creating temporary repository to stage upgraded data: $TESTTMP/non-share-safe/.hg/upgrade.* (glob) | ||||
| (it is safe to interrupt this process any time before data migration completes) | (it is safe to interrupt this process any time before data migration completes) | ||||
| upgrading repository requirements | upgrading repository requirements | ||||
| removing temporary repository $TESTTMP/non-share-safe/.hg/upgrade.* (glob) | removing temporary repository $TESTTMP/non-share-safe/.hg/upgrade.* (glob) | ||||
| repository upgraded to share safe mode, existing shares will still work in old non-safe mode. Re-share existing shares to use them in safe mode New shares will be created in safe mode. | repository upgraded to share safe mode, existing shares will still work in old non-safe mode. Re-share existing shares to use them in safe mode New shares will be created in safe mode. | ||||
| $ hg debugrequirements | $ hg debugrequirements | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| revlogv1 | revlogv1 | ||||
| share-safe | share-safe | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| share-safe | share-safe | ||||
| $ cat .hg/store/requires | $ cat .hg/store/requires | ||||
| dotencode | dotencode | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| creating temporary repository to stage upgraded data: $TESTTMP/non-share-safe/.hg/upgrade.* (glob) | creating temporary repository to stage upgraded data: $TESTTMP/non-share-safe/.hg/upgrade.* (glob) | ||||
| (it is safe to interrupt this process any time before data migration completes) | (it is safe to interrupt this process any time before data migration completes) | ||||
| upgrading repository requirements | upgrading repository requirements | ||||
| removing temporary repository $TESTTMP/non-share-safe/.hg/upgrade.* (glob) | removing temporary repository $TESTTMP/non-share-safe/.hg/upgrade.* (glob) | ||||
| repository downgraded to not use share safe mode, existing shares will not work and needs to be reshared. | repository downgraded to not use share safe mode, existing shares will not work and needs to be reshared. | ||||
| $ hg debugrequirements | $ hg debugrequirements | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| $ test -f .hg/store/requires | $ test -f .hg/store/requires | ||||
| [1] | [1] | ||||
| processed revlogs: | processed revlogs: | ||||
| - all-filelogs | - all-filelogs | ||||
| - changelog | - changelog | ||||
| - manifest | - manifest | ||||
| repository upgraded to share safe mode, existing shares will still work in old non-safe mode. Re-share existing shares to use them in safe mode New shares will be created in safe mode. | repository upgraded to share safe mode, existing shares will still work in old non-safe mode. Re-share existing shares to use them in safe mode New shares will be created in safe mode. | ||||
| $ hg debugrequirements | $ hg debugrequirements | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| revlogv1 | revlogv1 | ||||
| share-safe | share-safe | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| $ hg log -GT "{node}: {desc}\n" -R ../nss-share | $ hg log -GT "{node}: {desc}\n" -R ../nss-share | ||||
| abort: version mismatch: source uses share-safe functionality while the current share does not | abort: version mismatch: source uses share-safe functionality while the current share does not | ||||
| $ echo 1 > a.html | $ echo 1 > a.html | ||||
| $ echo 1 > c.py | $ echo 1 > c.py | ||||
| $ hg commit -m 'commit 1' | $ hg commit -m 'commit 1' | ||||
| Enable sparse profile | Enable sparse profile | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| testonly-simplestore (reposimplestore !) | testonly-simplestore (reposimplestore !) | ||||
| $ hg debugsparse --config extensions.sparse= --enable-profile frontend.sparse | $ hg debugsparse --config extensions.sparse= --enable-profile frontend.sparse | ||||
| $ ls -A | $ ls -A | ||||
| .hg | .hg | ||||
| a.html | a.html | ||||
| b.html | b.html | ||||
| Requirement for sparse added when sparse is enabled | Requirement for sparse added when sparse is enabled | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| exp-sparse | exp-sparse | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| testonly-simplestore (reposimplestore !) | testonly-simplestore (reposimplestore !) | ||||
| Client without sparse enabled reacts properly | Client without sparse enabled reacts properly | ||||
| $ hg files | $ hg files | ||||
| abort: repository is using sparse feature but sparse is not enabled; enable the "sparse" extensions to access | abort: repository is using sparse feature but sparse is not enabled; enable the "sparse" extensions to access | ||||
| [255] | [255] | ||||
| Requirement for sparse is removed when sparse is disabled | Requirement for sparse is removed when sparse is disabled | ||||
| $ hg debugsparse --reset --config extensions.sparse= | $ hg debugsparse --reset --config extensions.sparse= | ||||
| $ cat .hg/requires | $ cat .hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| testonly-simplestore (reposimplestore !) | testonly-simplestore (reposimplestore !) | ||||
| > sqlitestore = | > sqlitestore = | ||||
| > EOF | > EOF | ||||
| New repo should not use SQLite by default | New repo should not use SQLite by default | ||||
| $ hg init empty-no-sqlite | $ hg init empty-no-sqlite | ||||
| $ cat empty-no-sqlite/.hg/requires | $ cat empty-no-sqlite/.hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| storage.new-repo-backend=sqlite is recognized | storage.new-repo-backend=sqlite is recognized | ||||
| $ hg --config storage.new-repo-backend=sqlite init empty-sqlite | $ hg --config storage.new-repo-backend=sqlite init empty-sqlite | ||||
| $ cat empty-sqlite/.hg/requires | $ cat empty-sqlite/.hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| exp-sqlite-001 | exp-sqlite-001 | ||||
| exp-sqlite-comp-001=zstd (zstd !) | exp-sqlite-comp-001=zstd (zstd !) | ||||
| exp-sqlite-comp-001=$BUNDLE2_COMPRESSIONS$ (no-zstd !) | exp-sqlite-comp-001=$BUNDLE2_COMPRESSIONS$ (no-zstd !) | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| $ cat >> $HGRCPATH << EOF | $ cat >> $HGRCPATH << EOF | ||||
| > [storage] | > [storage] | ||||
| > new-repo-backend = sqlite | > new-repo-backend = sqlite | ||||
| > EOF | > EOF | ||||
| Can force compression to zlib | Can force compression to zlib | ||||
| $ hg --config storage.sqlite.compression=zlib init empty-zlib | $ hg --config storage.sqlite.compression=zlib init empty-zlib | ||||
| $ cat empty-zlib/.hg/requires | $ cat empty-zlib/.hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| exp-sqlite-001 | exp-sqlite-001 | ||||
| exp-sqlite-comp-001=$BUNDLE2_COMPRESSIONS$ | exp-sqlite-comp-001=$BUNDLE2_COMPRESSIONS$ | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||
| store | store | ||||
| Can force compression to none | Can force compression to none | ||||
| $ hg --config storage.sqlite.compression=none init empty-none | $ hg --config storage.sqlite.compression=none init empty-none | ||||
| $ cat empty-none/.hg/requires | $ cat empty-none/.hg/requires | ||||
| dotencode | dotencode | ||||
| exp-rc-dirstate-v2 (dirstate-v2 !) | dirstate-v2 (dirstate-v2 !) | ||||
| exp-sqlite-001 | exp-sqlite-001 | ||||
| exp-sqlite-comp-001=none | exp-sqlite-comp-001=none | ||||
| fncache | fncache | ||||
| generaldelta | generaldelta | ||||
| persistent-nodemap (rust !) | persistent-nodemap (rust !) | ||||
| revlog-compression-zstd (zstd !) | revlog-compression-zstd (zstd !) | ||||
| revlogv1 | revlogv1 | ||||
| sparserevlog | sparserevlog | ||||