This is an archive of the discontinued Mercurial Phabricator instance.

			Path	Packages
M			tests/test-bundle.t (6 lines)
M			tests/test-clone-uncompressed.t (6 lines)
M			tests/test-clonebundles.t (6 lines)
M			tests/test-debugcommands.t (6 lines)
M			tests/test-hgweb-commands.t (6 lines)
M			tests/test-http-protocol.t (6 lines)
M			tests/test-init.t (6 lines)
M			tests/test-lfconvert.t (6 lines)
M			tests/test-lfs-largefiles.t (6 lines)
M			tests/test-lfs-serve.t (6 lines)
M			tests/test-narrow-clone-no-ellipsis.t (6 lines)
M			tests/test-narrow-clone-stream.t (6 lines)
M			tests/test-narrow-clone.t (6 lines)
M			tests/test-phases.t (6 lines)
M			tests/test-remotefilelog-clone-tree.t (6 lines)
M			tests/test-remotefilelog-clone.t (6 lines)
M			tests/test-remotefilelog-log.t (6 lines)
M			tests/test-repo-compengines.t (6 lines)
M			tests/test-revlog-v2.t (6 lines)
M			tests/test-sparse-requirement.t (6 lines)
M			tests/test-ssh-bundle1.t (6 lines)
M			tests/test-ssh-proto-unbundle.t (6 lines)
M			tests/test-ssh-proto.t (6 lines)
M			tests/test-ssh.t (6 lines)
M			tests/test-stream-bundle-v2.t (6 lines)
M			tests/test-treemanifest.t (6 lines)
M			tests/test-wireproto-caching.t (6 lines)
M			tests/test-wireproto-command-capabilities.t (6 lines)
M			tests/test-wireproto-content-redirects.t (6 lines)

Status	Author	Revision
Closed	lothiraldan	D5346 tests: remove all transitional configuration
Closed	lothiraldan	D5345 sparse-revlog: enabled by default
Closed	lothiraldan	D5344 test: preemptively disable sparse-revlog for some of test-upgrade-repo
Closed	lothiraldan	D5343 test: enable sparse-revlog for test-wireproto-content-redirects.t
Closed	lothiraldan	D5342 test: enable sparse-revlog for test-wireproto-command-capabilities.t
Closed	lothiraldan	D5341 test: enable sparse-revlog for test-wireproto-caching.t
Closed	lothiraldan	D5340 test: enable sparse-revlog for test-treemanifest.t
Closed	lothiraldan	D5339 test: enable sparse-revlog for test-stream-bundle-v2.t
Closed	lothiraldan	D5338 test: enable sparse-revlog for test-ssh.t
Closed	lothiraldan	D5337 test: enable sparse-revlog for test-ssh-proto-unbundle.t
Closed	lothiraldan	D5336 test: enable sparse-revlog for test-ssh-proto.t
Closed	lothiraldan	D5335 test: enable sparse-revlog for test-ssh-bundle1.t
Closed	lothiraldan	D5334 test: enable sparse-revlog for test-sparse-requirement.t
Closed	lothiraldan	D5333 test: enable sparse-revlog for test-revlog-v2.t
Closed	lothiraldan	D5332 test: enable sparse-revlog for test-repo-compengines.t
Closed	lothiraldan	D5331 test: enable sparse-revlog for test-remotefilelog-log.t
Closed	lothiraldan	D5330 test: enable sparse-revlog for test-remotefilelog-clone-tree.t
Closed	lothiraldan	D5329 test: enable sparse-revlog for test-remotefilelog-clone.t
Closed	lothiraldan	D5328 test: enable sparse-revlog for test-phases.t
Closed	lothiraldan	D5327 test: enable sparse-revlog for test-narrow-clone.t
Closed	lothiraldan	D5326 test: enable sparse-revlog for test-narrow-clone-stream.t
Closed	lothiraldan	D5325 test: enable sparse-revlog for test-narrow-clone-no-ellipsis.t
Closed	lothiraldan	D5324 test: enable sparse-revlog for test-lfs-serve.t
Closed	lothiraldan	D5323 test: enable sparse-revlog for test-lfs-largefiles.t
Closed	lothiraldan	D5322 test: enable sparse-revlog for test-lfconvert.t
Closed	lothiraldan	D5321 test: enable sparse-revlog for test-init.t
Closed	lothiraldan	D5320 test: enable sparse-revlog for test-http-protocol.t
Closed	lothiraldan	D5319 test: enable sparse-revlog for test-hgweb-commands.t
Closed	lothiraldan	D5318 test: enable sparse-revlog for test-debugcommands.t
Closed	lothiraldan	D5317 test: enable sparse-revlog for test-clone-uncompressed.t
Closed	lothiraldan	D5316 test: enable sparse-revlog for test-clonebundles.t
Closed	lothiraldan	D5315 test: enable sparse-revlog for test-bundle.t
Closed	lothiraldan	D5314 test: make sure sparse-revlog does not interfer with test-parseindex.t
Closed	lothiraldan	D5313 test: explicitly disable sparse-revlog in test-http-bad-server.t
Closed	lothiraldan	D5312 test: explicitly disable sparse-revlog in test-generaldelta.t
Closed	lothiraldan	D5311 sparse-revlog: disable sparse-revlog if config disable general-delta
Closed	lothiraldan	D5310 test: fix config typo in test-upgrade-repo.t

Diff 12806

tests/test-bundle.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	Setting up test			Setting up test

	$ hg init test			$ hg init test
	$ cd test			$ cd test
	$ echo 0 > afile			$ echo 0 > afile
	$ hg add afile			$ hg add afile
	$ hg commit -m "0.0"			$ hg commit -m "0.0"
	$ echo 1 >> afile			$ echo 1 >> afile

tests/test-clone-uncompressed.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	#require serve no-reposimplestore no-chg			#require serve no-reposimplestore no-chg

	#testcases stream-legacy stream-bundle2			#testcases stream-legacy stream-bundle2

	#if stream-legacy			#if stream-legacy
	$ cat << EOF >> $HGRCPATH			$ cat << EOF >> $HGRCPATH
	> [server]			> [server]
	> bundle2.stream = no			> bundle2.stream = no

tests/test-clonebundles.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	#require no-reposimplestore no-chg			#require no-reposimplestore no-chg

	Set up a server			Set up a server

	$ hg init server			$ hg init server
	$ cd server			$ cd server
	$ cat >> .hg/hgrc << EOF			$ cat >> .hg/hgrc << EOF
	> [extensions]			> [extensions]

tests/test-debugcommands.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	$ cat << EOF >> $HGRCPATH			$ cat << EOF >> $HGRCPATH
	> [ui]			> [ui]
	> interactive=yes			> interactive=yes
	> EOF			> EOF

	$ hg init debugrevlog			$ hg init debugrevlog
	$ cd debugrevlog			$ cd debugrevlog
	$ echo a > a			$ echo a > a

tests/test-hgweb-commands.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	#require serve			#require serve

	An attempt at more fully testing the hgweb web interface.			An attempt at more fully testing the hgweb web interface.
	The following things are tested elsewhere and are therefore omitted:			The following things are tested elsewhere and are therefore omitted:
	- archive, tested in test-archive			- archive, tested in test-archive
	- unbundle, tested in test-push-http			- unbundle, tested in test-push-http
	- changegroupsubset, tested in test-pull			- changegroupsubset, tested in test-pull

tests/test-http-protocol.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	#require no-chg			#require no-chg

	$ . $TESTDIR/wireprotohelpers.sh			$ . $TESTDIR/wireprotohelpers.sh

	$ cat >> $HGRCPATH << EOF			$ cat >> $HGRCPATH << EOF
	> [web]			> [web]
	> push_ssl = false			> push_ssl = false
	> allow_push = *			> allow_push = *

tests/test-init.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	This test tries to exercise the ssh functionality with a dummy script			This test tries to exercise the ssh functionality with a dummy script

	$ checknewrepo()			$ checknewrepo()
	> {			> {
	> name=$1			> name=$1
	> if [ -d "$name"/.hg/store ]; then			> if [ -d "$name"/.hg/store ]; then
	> echo store created			> echo store created
	> fi			> fi

tests/test-lfconvert.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	$ USERCACHE="$TESTTMP/cache"; export USERCACHE			$ USERCACHE="$TESTTMP/cache"; export USERCACHE
	$ mkdir "${USERCACHE}"			$ mkdir "${USERCACHE}"
	$ cat >> $HGRCPATH <<EOF			$ cat >> $HGRCPATH <<EOF
	> [extensions]			> [extensions]
	> largefiles =			> largefiles =
	> share =			> share =
	> strip =			> strip =
	> convert =			> convert =

tests/test-lfs-largefiles.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	#require no-reposimplestore no-chg			#require no-reposimplestore no-chg

	This tests the interaction between the largefiles and lfs extensions, and			This tests the interaction between the largefiles and lfs extensions, and
	conversion from largefiles -> lfs.			conversion from largefiles -> lfs.

	$ cat >> $HGRCPATH << EOF			$ cat >> $HGRCPATH << EOF
	> [extensions]			> [extensions]
	> largefiles =			> largefiles =

tests/test-lfs-serve.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	#testcases lfsremote-on lfsremote-off			#testcases lfsremote-on lfsremote-off
	#require serve no-reposimplestore no-chg			#require serve no-reposimplestore no-chg

	This test splits `hg serve` with and without using the extension into separate			This test splits `hg serve` with and without using the extension into separate
	tests cases. The tests are broken down as follows, where "LFS"/"No-LFS"			tests cases. The tests are broken down as follows, where "LFS"/"No-LFS"
	indicates whether or not there are commits that use an LFS file, and "D"/"E"			indicates whether or not there are commits that use an LFS file, and "D"/"E"
	indicates whether or not the extension is loaded. The "X" cases are not tested			indicates whether or not the extension is loaded. The "X" cases are not tested
	individually, because the lfs requirement causes the process to bail early if			individually, because the lfs requirement causes the process to bail early if

tests/test-narrow-clone-no-ellipsis.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	$ . "$TESTDIR/narrow-library.sh"			$ . "$TESTDIR/narrow-library.sh"

	$ hg init master			$ hg init master
	$ cd master			$ cd master
	$ mkdir dir			$ mkdir dir
	$ mkdir dir/src			$ mkdir dir/src
	$ cd dir/src			$ cd dir/src
	$ for x in `$TESTDIR/seq.py 20`; do echo $x > "f$x"; hg add "f$x"; hg commit -m "Commit src $x"; done			$ for x in `$TESTDIR/seq.py 20`; do echo $x > "f$x"; hg add "f$x"; hg commit -m "Commit src $x"; done

tests/test-narrow-clone-stream.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	#testcases tree flat-fncache flat-nofncache			#testcases tree flat-fncache flat-nofncache

	Tests narrow stream clones			Tests narrow stream clones

	$ . "$TESTDIR/narrow-library.sh"			$ . "$TESTDIR/narrow-library.sh"

	#if tree			#if tree
	$ cat << EOF >> $HGRCPATH			$ cat << EOF >> $HGRCPATH

tests/test-narrow-clone.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	$ . "$TESTDIR/narrow-library.sh"			$ . "$TESTDIR/narrow-library.sh"

	$ hg init master			$ hg init master
	$ cd master			$ cd master
	$ cat >> .hg/hgrc <<EOF			$ cat >> .hg/hgrc <<EOF
	> [narrow]			> [narrow]
	> serveellipses=True			> serveellipses=True
	> EOF			> EOF

tests/test-phases.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	$ cat > $TESTTMP/hook.sh << 'EOF'			$ cat > $TESTTMP/hook.sh << 'EOF'
	> echo "test-hook-close-phase: $HG_NODE: $HG_OLDPHASE -> $HG_PHASE"			> echo "test-hook-close-phase: $HG_NODE: $HG_OLDPHASE -> $HG_PHASE"
	> EOF			> EOF

	$ cat >> $HGRCPATH << EOF			$ cat >> $HGRCPATH << EOF
	> [extensions]			> [extensions]
	> phasereport=$TESTDIR/testlib/ext-phase-report.py			> phasereport=$TESTDIR/testlib/ext-phase-report.py
	> [hooks]			> [hooks]

tests/test-remotefilelog-clone-tree.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	#require no-windows			#require no-windows

	$ . "$TESTDIR/remotefilelog-library.sh"			$ . "$TESTDIR/remotefilelog-library.sh"

	$ hg init master			$ hg init master
	$ cd master			$ cd master
	$ echo treemanifest >> .hg/requires			$ echo treemanifest >> .hg/requires
	$ cat >> .hg/hgrc <<EOF			$ cat >> .hg/hgrc <<EOF

tests/test-remotefilelog-clone.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	#require no-windows			#require no-windows

	$ . "$TESTDIR/remotefilelog-library.sh"			$ . "$TESTDIR/remotefilelog-library.sh"

	$ hg init master			$ hg init master
	$ cd master			$ cd master
	$ cat >> .hg/hgrc <<EOF			$ cat >> .hg/hgrc <<EOF
	> [remotefilelog]			> [remotefilelog]

tests/test-remotefilelog-log.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	#require no-windows			#require no-windows

	$ . "$TESTDIR/remotefilelog-library.sh"			$ . "$TESTDIR/remotefilelog-library.sh"

	$ hg init master			$ hg init master
	$ cd master			$ cd master
	$ cat >> .hg/hgrc <<EOF			$ cat >> .hg/hgrc <<EOF
	> [remotefilelog]			> [remotefilelog]

tests/test-repo-compengines.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	A new repository uses zlib storage, which doesn't need a requirement			A new repository uses zlib storage, which doesn't need a requirement

	$ hg init default			$ hg init default
	$ cd default			$ cd default
	$ cat .hg/requires			$ cat .hg/requires
	dotencode			dotencode
	fncache			fncache
	generaldelta			generaldelta

tests/test-revlog-v2.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	#require reporevlogstore			#require reporevlogstore

	A repo with unknown revlogv2 requirement string cannot be opened			A repo with unknown revlogv2 requirement string cannot be opened

	$ hg init invalidreq			$ hg init invalidreq
	$ cd invalidreq			$ cd invalidreq
	$ echo exp-revlogv2.unknown >> .hg/requires			$ echo exp-revlogv2.unknown >> .hg/requires
	$ hg log			$ hg log

tests/test-sparse-requirement.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	$ hg init repo			$ hg init repo
	$ cd repo			$ cd repo

	$ touch a.html b.html c.py d.py			$ touch a.html b.html c.py d.py

	$ cat > frontend.sparse << EOF			$ cat > frontend.sparse << EOF
	> [include]			> [include]
	> *.html			> *.html

tests/test-ssh-bundle1.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	This test is a duplicate of 'test-http.t' feel free to factor out			This test is a duplicate of 'test-http.t' feel free to factor out
	parts that are not bundle1/bundle2 specific.			parts that are not bundle1/bundle2 specific.

	#testcases sshv1 sshv2			#testcases sshv1 sshv2

	#if sshv2			#if sshv2
	$ cat >> $HGRCPATH << EOF			$ cat >> $HGRCPATH << EOF
	> [experimental]			> [experimental]

tests/test-ssh-proto-unbundle.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	$ cat > hgrc-sshv2 << EOF			$ cat > hgrc-sshv2 << EOF
	> %include $HGRCPATH			> %include $HGRCPATH
	> [experimental]			> [experimental]
	> sshpeer.advertise-v2 = true			> sshpeer.advertise-v2 = true
	> sshserver.support-v2 = true			> sshserver.support-v2 = true
	> EOF			> EOF

	$ debugwireproto() {			$ debugwireproto() {

tests/test-ssh-proto.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	#require no-chg			#require no-chg

	$ cat > hgrc-sshv2 << EOF			$ cat > hgrc-sshv2 << EOF
	> %include $HGRCPATH			> %include $HGRCPATH
	> [experimental]			> [experimental]
	> sshpeer.advertise-v2 = true			> sshpeer.advertise-v2 = true
	> sshserver.support-v2 = true			> sshserver.support-v2 = true
	> EOF			> EOF

tests/test-ssh.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	#testcases sshv1 sshv2			#testcases sshv1 sshv2

	#if sshv2			#if sshv2
	$ cat >> $HGRCPATH << EOF			$ cat >> $HGRCPATH << EOF
	> [experimental]			> [experimental]
	> sshpeer.advertise-v2 = true			> sshpeer.advertise-v2 = true
	> sshserver.support-v2 = true			> sshserver.support-v2 = true
	> EOF			> EOF

tests/test-stream-bundle-v2.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	#require no-reposimplestore			#require no-reposimplestore

	Test creating a consuming stream bundle v2			Test creating a consuming stream bundle v2

	$ getmainid() {			$ getmainid() {
	> hg -R main log --template '{node}\n' --rev "$1"			> hg -R main log --template '{node}\n' --rev "$1"
	> }			> }

tests/test-treemanifest.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	$ cat << EOF >> $HGRCPATH			$ cat << EOF >> $HGRCPATH
	> [ui]			> [ui]
	> ssh="$PYTHON" "$TESTDIR/dummyssh"			> ssh="$PYTHON" "$TESTDIR/dummyssh"
	> EOF			> EOF

	Set up repo			Set up repo

	$ hg --config experimental.treemanifest=True init repo			$ hg --config experimental.treemanifest=True init repo

tests/test-wireproto-caching.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	$ . $TESTDIR/wireprotohelpers.sh			$ . $TESTDIR/wireprotohelpers.sh
	$ cat >> $HGRCPATH << EOF			$ cat >> $HGRCPATH << EOF
	> [extensions]			> [extensions]
	> blackbox =			> blackbox =
	> [blackbox]			> [blackbox]
	> track = simplecache			> track = simplecache
	> EOF			> EOF
	$ hg init server			$ hg init server

tests/test-wireproto-command-capabilities.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	#require no-chg			#require no-chg

	$ . $TESTDIR/wireprotohelpers.sh			$ . $TESTDIR/wireprotohelpers.sh

	$ hg init server			$ hg init server

	zstd isn't present in plain builds. Make tests easier by removing			zstd isn't present in plain builds. Make tests easier by removing
	zstd from the equation.			zstd from the equation.

tests/test-wireproto-content-redirects.t

	TRANSITIONAL CONFIG
	$ cat << EOF >> $HGRCPATH
	> [format]
	> sparse-revlog = yes
	> EOF

	$ . $TESTDIR/wireprotohelpers.sh			$ . $TESTDIR/wireprotohelpers.sh

	$ cat >> $HGRCPATH << EOF			$ cat >> $HGRCPATH << EOF
	> [extensions]			> [extensions]
	> blackbox =			> blackbox =
	> [blackbox]			> [blackbox]
	> track = simplecache			> track = simplecache
	> EOF			> EOF

Diff	ID	Description	Created	Lint	Unit
Base		Base
Diff 1	12655		Nov 28 2018, 3:54 PM	★	★
Diff 2	12806	rHGa0886a4d6dce8a680b2013f49a859811b5b6da9f	Nov 11 2018, 8:21 PM	★	★

This is an archive of the discontinued Mercurial Phabricator instance.

tests: remove all transitional configurationClosedPublic

Details

Diff Detail

Event Timeline

Revision ContentsChangeset List

Diff 12806

tests/test-bundle.t

tests/test-clone-uncompressed.t

tests/test-clonebundles.t

tests/test-debugcommands.t

tests/test-hgweb-commands.t

tests/test-http-protocol.t

tests/test-init.t

tests/test-lfconvert.t

tests/test-lfs-largefiles.t

tests/test-lfs-serve.t

tests/test-narrow-clone-no-ellipsis.t

tests/test-narrow-clone-stream.t

tests/test-narrow-clone.t

tests/test-phases.t

tests/test-remotefilelog-clone-tree.t

tests/test-remotefilelog-clone.t

tests/test-remotefilelog-log.t

tests/test-repo-compengines.t

tests/test-revlog-v2.t

tests/test-sparse-requirement.t

tests/test-ssh-bundle1.t

tests/test-ssh-proto-unbundle.t

tests/test-ssh-proto.t

tests/test-ssh.t

tests/test-stream-bundle-v2.t

tests/test-treemanifest.t

tests/test-wireproto-caching.t

tests/test-wireproto-command-capabilities.t

tests/test-wireproto-content-redirects.t

tests: remove all transitional configuration
ClosedPublic

Revision Contents
Changeset List