This is an archive of the discontinued Mercurial Phabricator instance.

Differential D10718

dirstate-v2: Update the expected output of some tests for new requirement
ClosedPublic

Authored by SimonSapin on May 17 2021, 6:05 AM.

Details

Reviewers
durin42
Alphare
Group Reviewers
hg-reviewers
Commits
rHG40b51c28b242: dirstate-v2: Update the expected output of some tests for new requirement
rHG2008b3fa3fcd: dirstate-v2: Update the expected output of some tests for new requirement
Summary

Fix most test failures (except in test-narrow-debugrebuilddirstate.t and
test-upgrade-repo.t) caused by the new entry in config or in .hg/requires
when running run-tests.py --extra-config-opt format.exp-dirstate-v2=1

There is no CI so far for this configuration.

Diff Detail

Repository
rHG Mercurial
Branch
default
Lint
No Linters Available
Unit
No Unit Test Coverage

Event Timeline

SimonSapin created this revision.May 17 2021, 6:05 AM
baymax updated this revision to Diff 27998.May 17 2021, 8:39 AM

✅ refresh by Heptapod after a successful CI run (🐙 💚)

Alphare added a subscriber: Alphare.May 19 2021, 5:41 AM
Alphare added inline comments.
tests/hghave.py
1052

Should you be using stringutil.parsebool instead?

tests/test-config.t
162

That looks unrelated?

SimonSapin added inline comments.May 19 2021, 6:22 AM
tests/hghave.py
1052

Can we really import Mercurial modules from inside of hghave.py? That isn’t done so far

tests/test-config.t
162

Without this change, the hg config format command prints the whole format section of configuration including format.exp-dirstate-v2

Alphare accepted this revision.May 19 2021, 6:48 AM
Alphare added inline comments.
tests/hghave.py
1052

Right, probably not

This revision is now accepted and ready to land.May 19 2021, 6:48 AM
baymax updated this revision to Diff 28099.May 19 2021, 7:41 AM

✅ refresh by Heptapod after a successful CI run (🐙 💚)

Revision Contents
Changeset List

Diff 28099

mercurial/localrepo.py

requirements.add(b'exp-compression-%s' % compengine) requirements.add(b'exp-compression-%s' % compengine)
if scmutil.gdinitconfig(ui): if scmutil.gdinitconfig(ui):
requirements.add(requirementsmod.GENERALDELTA_REQUIREMENT) requirements.add(requirementsmod.GENERALDELTA_REQUIREMENT)
if ui.configbool(b'format', b'sparse-revlog'): if ui.configbool(b'format', b'sparse-revlog'):
requirements.add(requirementsmod.SPARSEREVLOG_REQUIREMENT) requirements.add(requirementsmod.SPARSEREVLOG_REQUIREMENT)
# experimental config: format.exp-dirstate-v2 # experimental config: format.exp-dirstate-v2
# Keep this logic in sync with `has_dirstate_v2()` in `tests/hghave.py`
if ui.configbool(b'format', b'exp-dirstate-v2'): if ui.configbool(b'format', b'exp-dirstate-v2'):
if dirstate.SUPPORTS_DIRSTATE_V2: if dirstate.SUPPORTS_DIRSTATE_V2:
requirements.add(requirementsmod.DIRSTATE_V2_REQUIREMENT) requirements.add(requirementsmod.DIRSTATE_V2_REQUIREMENT)
else: else:
raise error.Abort( raise error.Abort(
_( _(
b"dirstate v2 format requested by config " b"dirstate v2 format requested by config "
b"but not supported (requires Rust extensions)" b"but not supported (requires Rust extensions)"

tests/hghave.py

return 'bundlerepo' in getrepofeatures() return 'bundlerepo' in getrepofeatures()
@check('repofncache', 'repository has an fncache') @check('repofncache', 'repository has an fncache')
def has_repofncache(): def has_repofncache():
return 'fncache' in getrepofeatures() return 'fncache' in getrepofeatures()
@check('dirstate-v2', 'using the v2 format of .hg/dirstate')
def has_dirstate_v2():
# Keep this logic in sync with `newreporequirements()` in `mercurial/localrepo.py`
return has_rust() and matchoutput(
'hg config format.exp-dirstate-v2', b'(?i)1|yes|true|on|always'
AlphareUnsubmitted
Not Done

Should you be using stringutil.parsebool instead?

Alphare: Should you be using `stringutil.parsebool` instead?
SimonSapinAuthorUnsubmitted
Done

Can we really import Mercurial modules from inside of hghave.py? That isn’t done so far

SimonSapin: Can we really import Mercurial modules from inside of `hghave.py`? That isn’t done so far
AlphareUnsubmitted
Not Done

Right, probably not

Alphare: Right, probably not
)
@check('sqlite', 'sqlite3 module and matching cli is available') @check('sqlite', 'sqlite3 module and matching cli is available')
def has_sqlite(): def has_sqlite():
try: try:
import sqlite3 import sqlite3
version = sqlite3.sqlite_version_info version = sqlite3.sqlite_version_info
except ImportError: except ImportError:
return False return False

tests/test-basic.t

Create a repository: Create a repository:
#if no-extraextensions #if no-extraextensions
$ hg config $ hg config
devel.all-warnings=true devel.all-warnings=true
devel.default-date=0 0 devel.default-date=0 0
extensions.fsmonitor= (fsmonitor !) extensions.fsmonitor= (fsmonitor !)
format.exp-dirstate-v2=1 (dirstate-v2 !)
largefiles.usercache=$TESTTMP/.cache/largefiles largefiles.usercache=$TESTTMP/.cache/largefiles
lfs.usercache=$TESTTMP/.cache/lfs lfs.usercache=$TESTTMP/.cache/lfs
ui.slash=True ui.slash=True
ui.interactive=False ui.interactive=False
ui.detailed-exit-code=True ui.detailed-exit-code=True
ui.merge=internal:merge ui.merge=internal:merge
ui.mergemarkers=detailed ui.mergemarkers=detailed
ui.promptecho=True ui.promptecho=True

tests/test-clone-uncompressed.t

0090: 67 76 31 25 32 43 73 70 61 72 73 65 72 65 76 6c |gv1%2Csparserevl| 0090: 67 76 31 25 32 43 73 70 61 72 73 65 72 65 76 6c |gv1%2Csparserevl|
00a0: 6f 67 25 32 43 73 74 6f 72 65 00 00 80 00 73 08 |og%2Cstore....s.| 00a0: 6f 67 25 32 43 73 74 6f 72 65 00 00 80 00 73 08 |og%2Cstore....s.|
00b0: 42 64 61 74 61 2f 30 2e 69 00 03 00 01 00 00 00 |Bdata/0.i.......| 00b0: 42 64 61 74 61 2f 30 2e 69 00 03 00 01 00 00 00 |Bdata/0.i.......|
00c0: 00 00 00 00 02 00 00 00 01 00 00 00 00 00 00 00 |................| 00c0: 00 00 00 00 02 00 00 00 01 00 00 00 00 00 00 00 |................|
00d0: 01 ff ff ff ff ff ff ff ff 80 29 63 a0 49 d3 23 |..........)c.I.#| 00d0: 01 ff ff ff ff ff ff ff ff 80 29 63 a0 49 d3 23 |..........)c.I.#|
00e0: 87 bf ce fe 56 67 92 67 2c 69 d1 ec 39 00 00 00 |....Vg.g,i..9...| 00e0: 87 bf ce fe 56 67 92 67 2c 69 d1 ec 39 00 00 00 |....Vg.g,i..9...|
00f0: 00 00 00 00 00 00 00 00 00 75 30 73 08 42 64 61 |.........u0s.Bda| 00f0: 00 00 00 00 00 00 00 00 00 75 30 73 08 42 64 61 |.........u0s.Bda|
#endif #endif
#if zstd rust #if zstd rust no-dirstate-v2
$ f --size --hex --bytes 256 body $ f --size --hex --bytes 256 body
body: size=109431 body: size=109431
0000: 04 6e 6f 6e 65 48 47 32 30 00 00 00 00 00 00 00 |.noneHG20.......| 0000: 04 6e 6f 6e 65 48 47 32 30 00 00 00 00 00 00 00 |.noneHG20.......|
0010: ae 07 53 54 52 45 41 4d 32 00 00 00 00 03 00 09 |..STREAM2.......| 0010: ae 07 53 54 52 45 41 4d 32 00 00 00 00 03 00 09 |..STREAM2.......|
0020: 05 09 04 0c 73 62 79 74 65 63 6f 75 6e 74 39 35 |....sbytecount95| 0020: 05 09 04 0c 73 62 79 74 65 63 6f 75 6e 74 39 35 |....sbytecount95|
0030: 38 39 37 66 69 6c 65 63 6f 75 6e 74 31 30 33 30 |897filecount1030| 0030: 38 39 37 66 69 6c 65 63 6f 75 6e 74 31 30 33 30 |897filecount1030|
0040: 72 65 71 75 69 72 65 6d 65 6e 74 73 64 6f 74 65 |requirementsdote| 0040: 72 65 71 75 69 72 65 6d 65 6e 74 73 64 6f 74 65 |requirementsdote|
0050: 6e 63 6f 64 65 25 32 43 66 6e 63 61 63 68 65 25 |ncode%2Cfncache%| 0050: 6e 63 6f 64 65 25 32 43 66 6e 63 61 63 68 65 25 |ncode%2Cfncache%|
0060: 32 43 67 65 6e 65 72 61 6c 64 65 6c 74 61 25 32 |2Cgeneraldelta%2| 0060: 32 43 67 65 6e 65 72 61 6c 64 65 6c 74 61 25 32 |2Cgeneraldelta%2|
0070: 43 70 65 72 73 69 73 74 65 6e 74 2d 6e 6f 64 65 |Cpersistent-node| 0070: 43 70 65 72 73 69 73 74 65 6e 74 2d 6e 6f 64 65 |Cpersistent-node|
0080: 6d 61 70 25 32 43 72 65 76 6c 6f 67 2d 63 6f 6d |map%2Crevlog-com| 0080: 6d 61 70 25 32 43 72 65 76 6c 6f 67 2d 63 6f 6d |map%2Crevlog-com|
0090: 70 72 65 73 73 69 6f 6e 2d 7a 73 74 64 25 32 43 |pression-zstd%2C| 0090: 70 72 65 73 73 69 6f 6e 2d 7a 73 74 64 25 32 43 |pression-zstd%2C|
00a0: 72 65 76 6c 6f 67 76 31 25 32 43 73 70 61 72 73 |revlogv1%2Cspars| 00a0: 72 65 76 6c 6f 67 76 31 25 32 43 73 70 61 72 73 |revlogv1%2Cspars|
00b0: 65 72 65 76 6c 6f 67 25 32 43 73 74 6f 72 65 00 |erevlog%2Cstore.| 00b0: 65 72 65 76 6c 6f 67 25 32 43 73 74 6f 72 65 00 |erevlog%2Cstore.|
00c0: 00 80 00 73 08 42 64 61 74 61 2f 30 2e 69 00 03 |...s.Bdata/0.i..| 00c0: 00 80 00 73 08 42 64 61 74 61 2f 30 2e 69 00 03 |...s.Bdata/0.i..|
00d0: 00 01 00 00 00 00 00 00 00 02 00 00 00 01 00 00 |................| 00d0: 00 01 00 00 00 00 00 00 00 02 00 00 00 01 00 00 |................|
00e0: 00 00 00 00 00 01 ff ff ff ff ff ff ff ff 80 29 |...............)| 00e0: 00 00 00 00 00 01 ff ff ff ff ff ff ff ff 80 29 |...............)|
00f0: 63 a0 49 d3 23 87 bf ce fe 56 67 92 67 2c 69 d1 |c.I.#....Vg.g,i.| 00f0: 63 a0 49 d3 23 87 bf ce fe 56 67 92 67 2c 69 d1 |c.I.#....Vg.g,i.|
#endif #endif
#if zstd dirstate-v2
$ f --size --hex --bytes 256 body
body: size=109449
0000: 04 6e 6f 6e 65 48 47 32 30 00 00 00 00 00 00 00 |.noneHG20.......|
0010: c0 07 53 54 52 45 41 4d 32 00 00 00 00 03 00 09 |..STREAM2.......|
0020: 05 09 04 0c 85 62 79 74 65 63 6f 75 6e 74 39 35 |.....bytecount95|
0030: 38 39 37 66 69 6c 65 63 6f 75 6e 74 31 30 33 30 |897filecount1030|
0040: 72 65 71 75 69 72 65 6d 65 6e 74 73 64 6f 74 65 |requirementsdote|
0050: 6e 63 6f 64 65 25 32 43 65 78 70 2d 64 69 72 73 |ncode%2Cexp-dirs|
0060: 74 61 74 65 2d 76 32 25 32 43 66 6e 63 61 63 68 |tate-v2%2Cfncach|
0070: 65 25 32 43 67 65 6e 65 72 61 6c 64 65 6c 74 61 |e%2Cgeneraldelta|
0080: 25 32 43 70 65 72 73 69 73 74 65 6e 74 2d 6e 6f |%2Cpersistent-no|
0090: 64 65 6d 61 70 25 32 43 72 65 76 6c 6f 67 2d 63 |demap%2Crevlog-c|
00a0: 6f 6d 70 72 65 73 73 69 6f 6e 2d 7a 73 74 64 25 |ompression-zstd%|
00b0: 32 43 72 65 76 6c 6f 67 76 31 25 32 43 73 70 61 |2Crevlogv1%2Cspa|
00c0: 72 73 65 72 65 76 6c 6f 67 25 32 43 73 74 6f 72 |rserevlog%2Cstor|
00d0: 65 00 00 80 00 73 08 42 64 61 74 61 2f 30 2e 69 |e....s.Bdata/0.i|
00e0: 00 03 00 01 00 00 00 00 00 00 00 02 00 00 00 01 |................|
00f0: 00 00 00 00 00 00 00 01 ff ff ff ff ff ff ff ff |................|
#endif
--uncompressed is an alias to --stream --uncompressed is an alias to --stream
#if stream-legacy #if stream-legacy
$ hg clone --uncompressed -U http://localhost:$HGPORT clone1-uncompressed $ hg clone --uncompressed -U http://localhost:$HGPORT clone1-uncompressed
streaming all changes streaming all changes
1027 files to transfer, 96.3 KB of data (no-zstd !) 1027 files to transfer, 96.3 KB of data (no-zstd !)
transferred 96.3 KB in * seconds (*/sec) (glob) (no-zstd !) transferred 96.3 KB in * seconds (*/sec) (glob) (no-zstd !)

tests/test-commandserver.t

... # but not for this repo ... # but not for this repo
... runcommand(server, [b'init', b'foo']) ... runcommand(server, [b'init', b'foo'])
... runcommand(server, [b'-R', b'foo', b'showconfig', b'ui', b'defaults']) ... runcommand(server, [b'-R', b'foo', b'showconfig', b'ui', b'defaults'])
*** runcommand showconfig *** runcommand showconfig
bundle.mainreporoot=$TESTTMP/repo bundle.mainreporoot=$TESTTMP/repo
devel.all-warnings=true devel.all-warnings=true
devel.default-date=0 0 devel.default-date=0 0
extensions.fsmonitor= (fsmonitor !) extensions.fsmonitor= (fsmonitor !)
format.exp-dirstate-v2=1 (dirstate-v2 !)
largefiles.usercache=$TESTTMP/.cache/largefiles largefiles.usercache=$TESTTMP/.cache/largefiles
lfs.usercache=$TESTTMP/.cache/lfs lfs.usercache=$TESTTMP/.cache/lfs
ui.slash=True ui.slash=True
ui.interactive=False ui.interactive=False
ui.detailed-exit-code=True ui.detailed-exit-code=True
ui.merge=internal:merge ui.merge=internal:merge
ui.mergemarkers=detailed ui.mergemarkers=detailed
ui.timeout.warn=15 ui.timeout.warn=15

tests/test-config.t

[ [
{"defaultvalue": false} {"defaultvalue": false}
] ]
$ hg config --config commands.commit.post-status= commands -T'{defaultvalue}\n' $ hg config --config commands.commit.post-status= commands -T'{defaultvalue}\n'
False False
true true
$ hg config --config format.dotencode= format -Tjson $ hg config --config format.dotencode= format.dotencode -Tjson
AlphareUnsubmitted
Not Done

That looks unrelated?

Alphare: That looks unrelated?
SimonSapinAuthorUnsubmitted
Done

Without this change, the hg config format command prints the whole format section of configuration including format.exp-dirstate-v2

SimonSapin: Without this change, the `hg config format` command prints the whole `format` section of…
[ [
{ {
"defaultvalue": true, "defaultvalue": true,
"name": "format.dotencode", "name": "format.dotencode",
"source": "--config", "source": "--config",
"value": "" "value": ""
} }
] ]
$ hg config --config format.dotencode= format -T'json(defaultvalue)' $ hg config --config format.dotencode= format.dotencode -T'json(defaultvalue)'
[ [
{"defaultvalue": true} {"defaultvalue": true}
] ]
$ hg config --config format.dotencode= format -T'{defaultvalue}\n' $ hg config --config format.dotencode= format.dotencode -T'{defaultvalue}\n'
True True
bytes bytes
$ hg config --config commands.resolve.mark-check= commands -Tjson $ hg config --config commands.resolve.mark-check= commands -Tjson
[ [
{ {
"defaultvalue": "none", "defaultvalue": "none",

tests/test-init.t

creating 'local' creating 'local'
$ hg init local $ hg init local
$ checknewrepo local $ checknewrepo local
store created store created
00changelog.i created 00changelog.i created
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
testonly-simplestore (reposimplestore !) testonly-simplestore (reposimplestore !)
@@ -0,0 +1,1 @@ @@ -0,0 +1,1 @@
+this +this
creating repo with format.usestore=false creating repo with format.usestore=false
$ hg --config format.usestore=false init old $ hg --config format.usestore=false init old
$ checknewrepo old $ checknewrepo old
exp-dirstate-v2 (dirstate-v2 !)
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
testonly-simplestore (reposimplestore !) testonly-simplestore (reposimplestore !)
sparserevlog sparserevlog
creating repo with format.usefncache=false creating repo with format.usefncache=false
$ hg --config format.usefncache=false init old2 $ hg --config format.usefncache=false init old2
$ checknewrepo old2 $ checknewrepo old2
store created store created
00changelog.i created 00changelog.i created
exp-dirstate-v2 (dirstate-v2 !)
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
testonly-simplestore (reposimplestore !) testonly-simplestore (reposimplestore !)
creating repo with format.dotencode=false creating repo with format.dotencode=false
$ hg --config format.dotencode=false init old3 $ hg --config format.dotencode=false init old3
$ checknewrepo old3 $ checknewrepo old3
store created store created
00changelog.i created 00changelog.i created
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
testonly-simplestore (reposimplestore !) testonly-simplestore (reposimplestore !)
creating repo with format.dotencode=false creating repo with format.dotencode=false
$ hg --config format.generaldelta=false --config format.usegeneraldelta=false --config format.sparse-revlog=no init old4 $ hg --config format.generaldelta=false --config format.usegeneraldelta=false --config format.sparse-revlog=no init old4
$ checknewrepo old4 $ checknewrepo old4
store created store created
00changelog.i created 00changelog.i created
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
store store
testonly-simplestore (reposimplestore !) testonly-simplestore (reposimplestore !)
test failure test failure
creating 'local/sub/repo' creating 'local/sub/repo'
$ hg init local/sub/repo $ hg init local/sub/repo
$ checknewrepo local/sub/repo $ checknewrepo local/sub/repo
store created store created
00changelog.i created 00changelog.i created
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
testonly-simplestore (reposimplestore !) testonly-simplestore (reposimplestore !)
prepare test of init of url configured from paths prepare test of init of url configured from paths
$ echo '[paths]' >> $HGRCPATH $ echo '[paths]' >> $HGRCPATH
$ echo "somewhere = `pwd`/url from paths" >> $HGRCPATH $ echo "somewhere = `pwd`/url from paths" >> $HGRCPATH
$ echo "elsewhere = `pwd`/another paths url" >> $HGRCPATH $ echo "elsewhere = `pwd`/another paths url" >> $HGRCPATH
init should (for consistency with clone) expand the url init should (for consistency with clone) expand the url
$ hg init somewhere $ hg init somewhere
$ checknewrepo "url from paths" $ checknewrepo "url from paths"
store created store created
00changelog.i created 00changelog.i created
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
testonly-simplestore (reposimplestore !) testonly-simplestore (reposimplestore !)
verify that clone also expand urls verify that clone also expand urls
$ hg clone somewhere elsewhere $ hg clone somewhere elsewhere
updating to branch default updating to branch default
0 files updated, 0 files merged, 0 files removed, 0 files unresolved 0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ checknewrepo "another paths url" $ checknewrepo "another paths url"
store created store created
00changelog.i created 00changelog.i created
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
testonly-simplestore (reposimplestore !) testonly-simplestore (reposimplestore !)

tests/test-lfconvert.t

alsonormal alsonormal
$ md5sum.py large sub/maybelarge.dat $ md5sum.py large sub/maybelarge.dat
ec87a838931d4d5d2e94a04644788a55 large ec87a838931d4d5d2e94a04644788a55 large
1276481102f218c981e0324180bafd9f sub/maybelarge.dat 1276481102f218c981e0324180bafd9f sub/maybelarge.dat
"lfconvert" adds 'largefiles' to .hg/requires. "lfconvert" adds 'largefiles' to .hg/requires.
$ cat .hg/requires $ cat .hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
largefiles largefiles
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store

tests/test-lfs-largefiles.t

1 large by size 1 large by size
0 remove large_by_size.bin 0 remove large_by_size.bin
$ cd nolargefiles $ cd nolargefiles
The requirement is added to the destination repo. The requirement is added to the destination repo.
$ cat .hg/requires $ cat .hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
lfs lfs
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store

tests/test-narrow-clone-no-ellipsis.t

adding changesets adding changesets
adding manifests adding manifests
adding file changes adding file changes
added 40 changesets with 1 changes to 1 files added 40 changesets with 1 changes to 1 files
new changesets *:* (glob) new changesets *:* (glob)
$ cd narrow $ cd narrow
$ cat .hg/requires | grep -v generaldelta $ cat .hg/requires | grep -v generaldelta
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
narrowhg-experimental narrowhg-experimental
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
testonly-simplestore (reposimplestore !) testonly-simplestore (reposimplestore !)

tests/test-narrow-clone-stream.t

$ hg tracked $ hg tracked
I path:dir/src/F10 I path:dir/src/F10
Making sure we have the correct set of requirements Making sure we have the correct set of requirements
$ cat .hg/requires $ cat .hg/requires
dotencode (tree !) dotencode (tree !)
dotencode (flat-fncache !) dotencode (flat-fncache !)
exp-dirstate-v2 (dirstate-v2 !)
fncache (tree !) fncache (tree !)
fncache (flat-fncache !) fncache (flat-fncache !)
generaldelta generaldelta
narrowhg-experimental narrowhg-experimental
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog

tests/test-narrow-clone.t

adding changesets adding changesets
adding manifests adding manifests
adding file changes adding file changes
added 3 changesets with 1 changes to 1 files added 3 changesets with 1 changes to 1 files
new changesets *:* (glob) new changesets *:* (glob)
$ cd narrow $ cd narrow
$ cat .hg/requires | grep -v generaldelta $ cat .hg/requires | grep -v generaldelta
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
narrowhg-experimental narrowhg-experimental
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
testonly-simplestore (reposimplestore !) testonly-simplestore (reposimplestore !)

tests/test-narrow-sparse.t

inside/f inside/f
XXX: we should have a flag in `hg debugsparse` to list the sparse profile XXX: we should have a flag in `hg debugsparse` to list the sparse profile
$ test -f .hg/sparse $ test -f .hg/sparse
[1] [1]
$ cat .hg/requires $ cat .hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
narrowhg-experimental narrowhg-experimental
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
treemanifest (tree !) treemanifest (tree !)
$ hg debugrebuilddirstate $ hg debugrebuilddirstate

tests/test-persistent-nodemap.t

plain-cl-delta: yes yes yes plain-cl-delta: yes yes yes
compression: zlib zlib zlib (no-zstd !) compression: zlib zlib zlib (no-zstd !)
compression: zstd zstd zstd (zstd !) compression: zstd zstd zstd (zstd !)
compression-level: default default default compression-level: default default default
$ hg debugupgraderepo --run --no-backup $ hg debugupgraderepo --run --no-backup
upgrade will perform the following actions: upgrade will perform the following actions:
requirements requirements
preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-zstd !) preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-zstd no-dirstate-v2 !)
preserved: dotencode, fncache, generaldelta, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd !) preserved: dotencode, fncache, generaldelta, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd no-dirstate-v2 !)
preserved: dotencode, exp-dirstate-v2, fncache, generaldelta, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd dirstate-v2 !)
removed: persistent-nodemap removed: persistent-nodemap
processed revlogs: processed revlogs:
- all-filelogs - all-filelogs
- changelog - changelog
- manifest - manifest
beginning upgrade... beginning upgrade...
plain-cl-delta: yes yes yes plain-cl-delta: yes yes yes
compression: zlib zlib zlib (no-zstd !) compression: zlib zlib zlib (no-zstd !)
compression: zstd zstd zstd (zstd !) compression: zstd zstd zstd (zstd !)
compression-level: default default default compression-level: default default default
$ hg debugupgraderepo --run --no-backup $ hg debugupgraderepo --run --no-backup
upgrade will perform the following actions: upgrade will perform the following actions:
requirements requirements
preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-zstd !) preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-zstd no-dirstate-v2 !)
preserved: dotencode, fncache, generaldelta, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd !) preserved: dotencode, fncache, generaldelta, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd no-dirstate-v2 !)
preserved: dotencode, exp-dirstate-v2, fncache, generaldelta, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd dirstate-v2 !)
added: persistent-nodemap added: persistent-nodemap
persistent-nodemap persistent-nodemap
Speedup revision lookup by node id. Speedup revision lookup by node id.
processed revlogs: processed revlogs:
- all-filelogs - all-filelogs
- changelog - changelog
data-unused: 0.000% data-unused: 0.000%
Running unrelated upgrade Running unrelated upgrade
$ hg debugupgraderepo --run --no-backup --quiet --optimize re-delta-all $ hg debugupgraderepo --run --no-backup --quiet --optimize re-delta-all
upgrade will perform the following actions: upgrade will perform the following actions:
requirements requirements
preserved: dotencode, fncache, generaldelta, persistent-nodemap, revlogv1, sparserevlog, store (no-zstd !) preserved: dotencode, fncache, generaldelta, persistent-nodemap, revlogv1, sparserevlog, store (no-zstd no-dirstate-v2 !)
preserved: dotencode, fncache, generaldelta, persistent-nodemap, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd !) preserved: dotencode, fncache, generaldelta, persistent-nodemap, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd no-dirstate-v2 !)
preserved: dotencode, exp-dirstate-v2, fncache, generaldelta, persistent-nodemap, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd dirstate-v2 !)
optimisations: re-delta-all optimisations: re-delta-all
processed revlogs: processed revlogs:
- all-filelogs - all-filelogs
- changelog - changelog
- manifest - manifest

tests/test-phases.t

============================= =============================
Check we deny its usage on older repository Check we deny its usage on older repository
$ hg init no-internal-phase --config format.internal-phase=no $ hg init no-internal-phase --config format.internal-phase=no
$ cd no-internal-phase $ cd no-internal-phase
$ cat .hg/requires $ cat .hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
$ echo X > X $ echo X > X
$ cd .. $ cd ..
Check it works fine with repository that supports it. Check it works fine with repository that supports it.
$ hg init internal-phase --config format.internal-phase=yes $ hg init internal-phase --config format.internal-phase=yes
$ cd internal-phase $ cd internal-phase
$ cat .hg/requires $ cat .hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
internal-phase internal-phase
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store

tests/test-remotefilelog-clone-tree.t

streaming all changes streaming all changes
4 files to transfer, 449 bytes of data 4 files to transfer, 449 bytes of data
transferred 449 bytes in * seconds (*/sec) (glob) transferred 449 bytes in * seconds (*/sec) (glob)
searching for changes searching for changes
no changes found no changes found
$ cd shallow $ cd shallow
$ cat .hg/requires $ cat .hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
exp-remotefilelog-repo-req-1 exp-remotefilelog-repo-req-1
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
streaming all changes streaming all changes
5 files to transfer, 1008 bytes of data 5 files to transfer, 1008 bytes of data
transferred 1008 bytes in * seconds (*/sec) (glob) transferred 1008 bytes in * seconds (*/sec) (glob)
searching for changes searching for changes
no changes found no changes found
$ cd shallow2 $ cd shallow2
$ cat .hg/requires $ cat .hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
exp-remotefilelog-repo-req-1 exp-remotefilelog-repo-req-1
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
added 1 changesets with 0 changes to 0 files added 1 changesets with 0 changes to 0 files
new changesets 18d955ee7ba0 new changesets 18d955ee7ba0
updating to branch default updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved 1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ ls shallow3/.hg/store/data $ ls shallow3/.hg/store/data
$ cat shallow3/.hg/requires $ cat shallow3/.hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
exp-remotefilelog-repo-req-1 exp-remotefilelog-repo-req-1
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
treemanifest treemanifest

tests/test-remotefilelog-clone.t

streaming all changes streaming all changes
2 files to transfer, 227 bytes of data 2 files to transfer, 227 bytes of data
transferred 227 bytes in * seconds (*/sec) (glob) transferred 227 bytes in * seconds (*/sec) (glob)
searching for changes searching for changes
no changes found no changes found
$ cd shallow $ cd shallow
$ cat .hg/requires $ cat .hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
exp-remotefilelog-repo-req-1 exp-remotefilelog-repo-req-1
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
streaming all changes streaming all changes
3 files to transfer, 564 bytes of data 3 files to transfer, 564 bytes of data
transferred 564 bytes in * seconds (*/sec) (glob) transferred 564 bytes in * seconds (*/sec) (glob)
searching for changes searching for changes
no changes found no changes found
$ cd shallow2 $ cd shallow2
$ cat .hg/requires $ cat .hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
exp-remotefilelog-repo-req-1 exp-remotefilelog-repo-req-1
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
added 1 changesets with 0 changes to 0 files added 1 changesets with 0 changes to 0 files
new changesets b292c1e3311f new changesets b292c1e3311f
updating to branch default updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved 1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ ls shallow3/.hg/store/data $ ls shallow3/.hg/store/data
$ cat shallow3/.hg/requires $ cat shallow3/.hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
exp-remotefilelog-repo-req-1 exp-remotefilelog-repo-req-1
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store

tests/test-remotefilelog-log.t

streaming all changes streaming all changes
2 files to transfer, 473 bytes of data 2 files to transfer, 473 bytes of data
transferred 473 bytes in * seconds (*/sec) (glob) transferred 473 bytes in * seconds (*/sec) (glob)
searching for changes searching for changes
no changes found no changes found
$ cd shallow $ cd shallow
$ cat .hg/requires $ cat .hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
exp-remotefilelog-repo-req-1 exp-remotefilelog-repo-req-1
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store

tests/test-repo-compengines.t

A new repository uses zlib storage, which doesn't need a requirement A new repository uses zlib storage, which doesn't need a requirement
$ cat << EOF >> $HGRCPATH $ cat << EOF >> $HGRCPATH
> [format] > [format]
> # stabilize test accross variant > # stabilize test accross variant
> revlog-compression=zlib > revlog-compression=zlib
> EOF > EOF
$ hg init default $ hg init default
$ cd default $ cd default
$ cat .hg/requires $ cat .hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
testonly-simplestore (reposimplestore !) testonly-simplestore (reposimplestore !)
with that engine or a requirement with that engine or a requirement
$ cd default $ cd default
$ touch bar $ touch bar
$ hg --config format.revlog-compression=none -q commit -A -m 'add bar with a lot of repeated repeated repeated text' $ hg --config format.revlog-compression=none -q commit -A -m 'add bar with a lot of repeated repeated repeated text'
$ cat .hg/requires $ cat .hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
testonly-simplestore (reposimplestore !) testonly-simplestore (reposimplestore !)
$ hg debugrevlog -c | grep 0x78 $ hg debugrevlog -c | grep 0x78
0x78 (x) : 2 (100.00%) 0x78 (x) : 2 (100.00%)
0x78 (x) : 199 (100.00%) 0x78 (x) : 199 (100.00%)
$ cd .. $ cd ..
#if zstd #if zstd
$ hg --config format.revlog-compression=zstd init zstd $ hg --config format.revlog-compression=zstd init zstd
$ cd zstd $ cd zstd
$ cat .hg/requires $ cat .hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd revlog-compression-zstd
revlogv1 revlogv1
sparserevlog sparserevlog
store store
testonly-simplestore (reposimplestore !) testonly-simplestore (reposimplestore !)
user: test user: test
date: Thu Jan 01 00:00:00 1970 +0000 date: Thu Jan 01 00:00:00 1970 +0000
summary: some-commit summary: some-commit
$ cat none-compression/.hg/requires $ cat none-compression/.hg/requires
dotencode dotencode
exp-compression-none exp-compression-none
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
testonly-simplestore (reposimplestore !) testonly-simplestore (reposimplestore !)

tests/test-requires.t

> EOF > EOF
$ cat > supported/.hg/hgrc <<EOF $ cat > supported/.hg/hgrc <<EOF
> [extensions] > [extensions]
> # enable extension locally > # enable extension locally
> supportlocally = $TESTTMP/supported-locally/supportlocally.py > supportlocally = $TESTTMP/supported-locally/supportlocally.py
> EOF > EOF
$ hg -R supported debugrequirements $ hg -R supported debugrequirements
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
featuresetup-test featuresetup-test
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store

tests/test-revlog-v2.t

> [experimental] > [experimental]
> revlogv2 = enable-unstable-format-and-corrupt-my-data > revlogv2 = enable-unstable-format-and-corrupt-my-data
> EOF > EOF
$ hg init empty-repo $ hg init empty-repo
$ cd empty-repo $ cd empty-repo
$ cat .hg/requires $ cat .hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
exp-revlogv2.2 exp-revlogv2.2
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
sparserevlog sparserevlog
store store

tests/test-share-safe.t

> use-persistent-nodemap=no > use-persistent-nodemap=no
> EOF > EOF
prepare source repo prepare source repo
$ hg init source $ hg init source
$ cd source $ cd source
$ cat .hg/requires $ cat .hg/requires
exp-dirstate-v2 (dirstate-v2 !)
share-safe share-safe
$ cat .hg/store/requires $ cat .hg/store/requires
dotencode dotencode
fncache fncache
generaldelta generaldelta
revlogv1 revlogv1
sparserevlog sparserevlog
store store
$ hg debugrequirements $ hg debugrequirements
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
revlogv1 revlogv1
share-safe share-safe
sparserevlog sparserevlog
store store
$ echo a > a $ echo a > a
$ hg ci -Aqm "added a" $ hg ci -Aqm "added a"
$ echo b > b $ echo b > b
$ hg ci -Aqm "added b" $ hg ci -Aqm "added b"
$ HGEDITOR=cat hg config --shared $ HGEDITOR=cat hg config --shared
abort: repository is not shared; can't use --shared abort: repository is not shared; can't use --shared
[10] [10]
$ cd .. $ cd ..
Create a shared repo and check the requirements are shared and read correctly Create a shared repo and check the requirements are shared and read correctly
$ hg share source shared1 $ hg share source shared1
updating working directory updating working directory
2 files updated, 0 files merged, 0 files removed, 0 files unresolved 2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd shared1 $ cd shared1
$ cat .hg/requires $ cat .hg/requires
exp-dirstate-v2 (dirstate-v2 !)
share-safe share-safe
shared shared
$ hg debugrequirements -R ../source $ hg debugrequirements -R ../source
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
revlogv1 revlogv1
share-safe share-safe
sparserevlog sparserevlog
store store
$ hg debugrequirements $ hg debugrequirements
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
revlogv1 revlogv1
share-safe share-safe
shared shared
sparserevlog sparserevlog
store store
#if zstd #if zstd
$ echo "[format]" >> .hg/hgrc $ echo "[format]" >> .hg/hgrc
$ echo "revlog-compression=zstd" >> .hg/hgrc $ echo "revlog-compression=zstd" >> .hg/hgrc
$ hg debugupgraderepo --run -q $ hg debugupgraderepo --run -q
upgrade will perform the following actions: upgrade will perform the following actions:
requirements requirements
preserved: dotencode, fncache, generaldelta, revlogv1, share-safe, sparserevlog, store preserved: dotencode, fncache, generaldelta, revlogv1, share-safe, sparserevlog, store (no-dirstate-v2 !)
preserved: dotencode, exp-dirstate-v2, fncache, generaldelta, revlogv1, share-safe, sparserevlog, store (dirstate-v2 !)
added: revlog-compression-zstd added: revlog-compression-zstd
processed revlogs: processed revlogs:
- all-filelogs - all-filelogs
- changelog - changelog
- manifest - manifest
$ hg log -r . $ hg log -r .
$ hg debugupgraderepo --run -q -R ../shared1 $ hg debugupgraderepo --run -q -R ../shared1
abort: cannot upgrade repository; unsupported source requirement: shared abort: cannot upgrade repository; unsupported source requirement: shared
[255] [255]
$ hg debugupgraderepo --run -q $ hg debugupgraderepo --run -q
upgrade will perform the following actions: upgrade will perform the following actions:
requirements requirements
preserved: dotencode, fncache, generaldelta, revlogv1, share-safe, sparserevlog, store (no-zstd !) preserved: dotencode, fncache, generaldelta, revlogv1, share-safe, sparserevlog, store (no-zstd no-dirstate-v2 !)
preserved: dotencode, fncache, generaldelta, revlog-compression-zstd, revlogv1, share-safe, sparserevlog, store (zstd !) preserved: dotencode, fncache, generaldelta, revlog-compression-zstd, revlogv1, share-safe, sparserevlog, store (zstd no-dirstate-v2 !)
preserved: dotencode, exp-dirstate-v2, fncache, generaldelta, revlogv1, share-safe, sparserevlog, store (no-zstd dirstate-v2 !)
preserved: dotencode, exp-dirstate-v2, fncache, generaldelta, revlog-compression-zstd, revlogv1, share-safe, sparserevlog, store (zstd dirstate-v2 !)
added: persistent-nodemap added: persistent-nodemap
processed revlogs: processed revlogs:
- all-filelogs - all-filelogs
- changelog - changelog
- manifest - manifest
$ hg log -r . $ hg log -r .
Test that upgrading using debugupgraderepo works Test that upgrading using debugupgraderepo works
================================================= =================================================
$ hg init non-share-safe --config format.use-share-safe=false $ hg init non-share-safe --config format.use-share-safe=false
$ cd non-share-safe $ cd non-share-safe
$ hg debugrequirements $ hg debugrequirements
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
revlogv1 revlogv1
sparserevlog sparserevlog
store store
$ echo foo > foo $ echo foo > foo
$ hg ci -Aqm 'added foo' $ hg ci -Aqm 'added foo'
$ echo bar > bar $ echo bar > bar
$ hg ci -Aqm 'added bar' $ hg ci -Aqm 'added bar'
Create a share before upgrading Create a share before upgrading
$ cd .. $ cd ..
$ hg share non-share-safe nss-share $ hg share non-share-safe nss-share
updating working directory updating working directory
2 files updated, 0 files merged, 0 files removed, 0 files unresolved 2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg debugrequirements -R nss-share $ hg debugrequirements -R nss-share
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
revlogv1 revlogv1
shared shared
sparserevlog sparserevlog
store store
$ cd non-share-safe $ cd non-share-safe
Upgrade Upgrade
$ hg debugupgraderepo -q $ hg debugupgraderepo -q
requirements requirements
preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-dirstate-v2 !)
preserved: dotencode, exp-dirstate-v2, fncache, generaldelta, revlogv1, sparserevlog, store (dirstate-v2 !)
added: share-safe added: share-safe
processed revlogs: processed revlogs:
- all-filelogs - all-filelogs
- changelog - changelog
- manifest - manifest
$ hg debugupgraderepo --run $ hg debugupgraderepo --run
upgrade will perform the following actions: upgrade will perform the following actions:
requirements requirements
preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-dirstate-v2 !)
preserved: dotencode, exp-dirstate-v2, fncache, generaldelta, revlogv1, sparserevlog, store (dirstate-v2 !)
added: share-safe added: share-safe
share-safe share-safe
Upgrades a repository to share-safe format so that future shares of this repository share its requirements and configs. Upgrades a repository to share-safe format so that future shares of this repository share its requirements and configs.
processed revlogs: processed revlogs:
- all-filelogs - all-filelogs
- changelog - changelog
- manifest - manifest
beginning upgrade... beginning upgrade...
repository locked and read-only repository locked and read-only
creating temporary repository to stage upgraded data: $TESTTMP/non-share-safe/.hg/upgrade.* (glob) creating temporary repository to stage upgraded data: $TESTTMP/non-share-safe/.hg/upgrade.* (glob)
(it is safe to interrupt this process any time before data migration completes) (it is safe to interrupt this process any time before data migration completes)
upgrading repository requirements upgrading repository requirements
removing temporary repository $TESTTMP/non-share-safe/.hg/upgrade.* (glob) removing temporary repository $TESTTMP/non-share-safe/.hg/upgrade.* (glob)
repository upgraded to share safe mode, existing shares will still work in old non-safe mode. Re-share existing shares to use them in safe mode New shares will be created in safe mode. repository upgraded to share safe mode, existing shares will still work in old non-safe mode. Re-share existing shares to use them in safe mode New shares will be created in safe mode.
$ hg debugrequirements $ hg debugrequirements
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
revlogv1 revlogv1
share-safe share-safe
sparserevlog sparserevlog
store store
$ cat .hg/requires $ cat .hg/requires
exp-dirstate-v2 (dirstate-v2 !)
share-safe share-safe
$ cat .hg/store/requires $ cat .hg/store/requires
dotencode dotencode
fncache fncache
generaldelta generaldelta
revlogv1 revlogv1
sparserevlog sparserevlog
> [extensions] > [extensions]
> share = > share =
> [format] > [format]
> use-share-safe = False > use-share-safe = False
> EOF > EOF
$ hg debugupgraderepo -q $ hg debugupgraderepo -q
requirements requirements
preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-dirstate-v2 !)
preserved: dotencode, exp-dirstate-v2, fncache, generaldelta, revlogv1, sparserevlog, store (dirstate-v2 !)
removed: share-safe removed: share-safe
processed revlogs: processed revlogs:
- all-filelogs - all-filelogs
- changelog - changelog
- manifest - manifest
$ hg debugupgraderepo --run $ hg debugupgraderepo --run
upgrade will perform the following actions: upgrade will perform the following actions:
requirements requirements
preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-dirstate-v2 !)
preserved: dotencode, exp-dirstate-v2, fncache, generaldelta, revlogv1, sparserevlog, store (dirstate-v2 !)
removed: share-safe removed: share-safe
processed revlogs: processed revlogs:
- all-filelogs - all-filelogs
- changelog - changelog
- manifest - manifest
beginning upgrade... beginning upgrade...
repository locked and read-only repository locked and read-only
creating temporary repository to stage upgraded data: $TESTTMP/non-share-safe/.hg/upgrade.* (glob) creating temporary repository to stage upgraded data: $TESTTMP/non-share-safe/.hg/upgrade.* (glob)
(it is safe to interrupt this process any time before data migration completes) (it is safe to interrupt this process any time before data migration completes)
upgrading repository requirements upgrading repository requirements
removing temporary repository $TESTTMP/non-share-safe/.hg/upgrade.* (glob) removing temporary repository $TESTTMP/non-share-safe/.hg/upgrade.* (glob)
repository downgraded to not use share safe mode, existing shares will not work and needs to be reshared. repository downgraded to not use share safe mode, existing shares will not work and needs to be reshared.
$ hg debugrequirements $ hg debugrequirements
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
revlogv1 revlogv1
sparserevlog sparserevlog
store store
$ cat .hg/requires $ cat .hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
revlogv1 revlogv1
sparserevlog sparserevlog
store store
$ test -f .hg/store/requires $ test -f .hg/store/requires
[1] [1]
Testing automatic upgrade of shares when config is set Testing automatic upgrade of shares when config is set
$ hg debugupgraderepo -q --run --config format.use-share-safe=True $ hg debugupgraderepo -q --run --config format.use-share-safe=True
upgrade will perform the following actions: upgrade will perform the following actions:
requirements requirements
preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-dirstate-v2 !)
preserved: dotencode, exp-dirstate-v2, fncache, generaldelta, revlogv1, sparserevlog, store (dirstate-v2 !)
added: share-safe added: share-safe
processed revlogs: processed revlogs:
- all-filelogs - all-filelogs
- changelog - changelog
- manifest - manifest
repository upgraded to share safe mode, existing shares will still work in old non-safe mode. Re-share existing shares to use them in safe mode New shares will be created in safe mode. repository upgraded to share safe mode, existing shares will still work in old non-safe mode. Re-share existing shares to use them in safe mode New shares will be created in safe mode.
$ hg debugrequirements $ hg debugrequirements
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
revlogv1 revlogv1
share-safe share-safe
sparserevlog sparserevlog
store store
$ hg log -GT "{node}: {desc}\n" -R ../nss-share $ hg log -GT "{node}: {desc}\n" -R ../nss-share
abort: version mismatch: source uses share-safe functionality while the current share does not abort: version mismatch: source uses share-safe functionality while the current share does not

tests/test-sparse-requirement.t

$ echo 1 > a.html $ echo 1 > a.html
$ echo 1 > c.py $ echo 1 > c.py
$ hg commit -m 'commit 1' $ hg commit -m 'commit 1'
Enable sparse profile Enable sparse profile
$ cat .hg/requires $ cat .hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
testonly-simplestore (reposimplestore !) testonly-simplestore (reposimplestore !)
$ hg debugsparse --config extensions.sparse= --enable-profile frontend.sparse $ hg debugsparse --config extensions.sparse= --enable-profile frontend.sparse
$ ls -A $ ls -A
.hg .hg
a.html a.html
b.html b.html
Requirement for sparse added when sparse is enabled Requirement for sparse added when sparse is enabled
$ cat .hg/requires $ cat .hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
exp-sparse exp-sparse
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
testonly-simplestore (reposimplestore !) testonly-simplestore (reposimplestore !)
Client without sparse enabled reacts properly Client without sparse enabled reacts properly
$ hg files $ hg files
abort: repository is using sparse feature but sparse is not enabled; enable the "sparse" extensions to access abort: repository is using sparse feature but sparse is not enabled; enable the "sparse" extensions to access
[255] [255]
Requirement for sparse is removed when sparse is disabled Requirement for sparse is removed when sparse is disabled
$ hg debugsparse --reset --config extensions.sparse= $ hg debugsparse --reset --config extensions.sparse=
$ cat .hg/requires $ cat .hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
testonly-simplestore (reposimplestore !) testonly-simplestore (reposimplestore !)

tests/test-sqlitestore.t

> sqlitestore = > sqlitestore =
> EOF > EOF
New repo should not use SQLite by default New repo should not use SQLite by default
$ hg init empty-no-sqlite $ hg init empty-no-sqlite
$ cat empty-no-sqlite/.hg/requires $ cat empty-no-sqlite/.hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
storage.new-repo-backend=sqlite is recognized storage.new-repo-backend=sqlite is recognized
$ hg --config storage.new-repo-backend=sqlite init empty-sqlite $ hg --config storage.new-repo-backend=sqlite init empty-sqlite
$ cat empty-sqlite/.hg/requires $ cat empty-sqlite/.hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
exp-sqlite-001 exp-sqlite-001
exp-sqlite-comp-001=zstd (zstd !) exp-sqlite-comp-001=zstd (zstd !)
exp-sqlite-comp-001=$BUNDLE2_COMPRESSIONS$ (no-zstd !) exp-sqlite-comp-001=$BUNDLE2_COMPRESSIONS$ (no-zstd !)
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
$ cat >> $HGRCPATH << EOF $ cat >> $HGRCPATH << EOF
> [storage] > [storage]
> new-repo-backend = sqlite > new-repo-backend = sqlite
> EOF > EOF
Can force compression to zlib Can force compression to zlib
$ hg --config storage.sqlite.compression=zlib init empty-zlib $ hg --config storage.sqlite.compression=zlib init empty-zlib
$ cat empty-zlib/.hg/requires $ cat empty-zlib/.hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
exp-sqlite-001 exp-sqlite-001
exp-sqlite-comp-001=$BUNDLE2_COMPRESSIONS$ exp-sqlite-comp-001=$BUNDLE2_COMPRESSIONS$
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog
store store
Can force compression to none Can force compression to none
$ hg --config storage.sqlite.compression=none init empty-none $ hg --config storage.sqlite.compression=none init empty-none
$ cat empty-none/.hg/requires $ cat empty-none/.hg/requires
dotencode dotencode
exp-dirstate-v2 (dirstate-v2 !)
exp-sqlite-001 exp-sqlite-001
exp-sqlite-comp-001=none exp-sqlite-comp-001=none
fncache fncache
generaldelta generaldelta
persistent-nodemap (rust !) persistent-nodemap (rust !)
revlog-compression-zstd (zstd !) revlog-compression-zstd (zstd !)
revlogv1 revlogv1
sparserevlog sparserevlog

tests/test-stream-bundle-v2.t

> A > A
> EOF > EOF
$ hg bundle -a --type="none-v2;stream=v2" bundle.hg $ hg bundle -a --type="none-v2;stream=v2" bundle.hg
$ hg debugbundle bundle.hg $ hg debugbundle bundle.hg
Stream params: {} Stream params: {}
stream2 -- {bytecount: 1693, filecount: 11, requirements: dotencode%2Cfncache%2Cgeneraldelta%2Crevlogv1%2Csparserevlog%2Cstore} (mandatory: True) (no-zstd !) stream2 -- {bytecount: 1693, filecount: 11, requirements: dotencode%2Cfncache%2Cgeneraldelta%2Crevlogv1%2Csparserevlog%2Cstore} (mandatory: True) (no-zstd !)
stream2 -- {bytecount: 1693, filecount: 11, requirements: dotencode%2Cfncache%2Cgeneraldelta%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore} (mandatory: True) (zstd no-rust !) stream2 -- {bytecount: 1693, filecount: 11, requirements: dotencode%2Cfncache%2Cgeneraldelta%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore} (mandatory: True) (zstd no-rust !)
stream2 -- {bytecount: 1693, filecount: 11, requirements: dotencode%2Cfncache%2Cgeneraldelta%2Cpersistent-nodemap%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore} (mandatory: True) (rust !) stream2 -- {bytecount: 1693, filecount: 11, requirements: dotencode%2Cfncache%2Cgeneraldelta%2Cpersistent-nodemap%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore} (mandatory: True) (rust no-dirstate-v2 !)
stream2 -- {bytecount: 1693, filecount: 11, requirements: dotencode%2Cexp-dirstate-v2%2Cfncache%2Cgeneraldelta%2Cpersistent-nodemap%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore} (mandatory: True) (dirstate-v2 !)
$ hg debugbundle --spec bundle.hg $ hg debugbundle --spec bundle.hg
none-v2;stream=v2;requirements%3Ddotencode%2Cfncache%2Cgeneraldelta%2Crevlogv1%2Csparserevlog%2Cstore (no-zstd !) none-v2;stream=v2;requirements%3Ddotencode%2Cfncache%2Cgeneraldelta%2Crevlogv1%2Csparserevlog%2Cstore (no-zstd !)
none-v2;stream=v2;requirements%3Ddotencode%2Cfncache%2Cgeneraldelta%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore (zstd no-rust !) none-v2;stream=v2;requirements%3Ddotencode%2Cfncache%2Cgeneraldelta%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore (zstd no-rust !)
none-v2;stream=v2;requirements%3Ddotencode%2Cfncache%2Cgeneraldelta%2Cpersistent-nodemap%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore (rust !) none-v2;stream=v2;requirements%3Ddotencode%2Cfncache%2Cgeneraldelta%2Cpersistent-nodemap%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore (rust no-dirstate-v2 !)
none-v2;stream=v2;requirements%3Ddotencode%2Cexp-dirstate-v2%2Cfncache%2Cgeneraldelta%2Cpersistent-nodemap%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore (dirstate-v2 !)
Test that we can apply the bundle as a stream clone bundle Test that we can apply the bundle as a stream clone bundle
$ cat > .hg/clonebundles.manifest << EOF $ cat > .hg/clonebundles.manifest << EOF
> http://localhost:$HGPORT1/bundle.hg BUNDLESPEC=`hg debugbundle --spec bundle.hg` > http://localhost:$HGPORT1/bundle.hg BUNDLESPEC=`hg debugbundle --spec bundle.hg`
> EOF > EOF
$ hg serve -d -p $HGPORT --pid-file hg.pid --accesslog access.log $ hg serve -d -p $HGPORT --pid-file hg.pid --accesslog access.log