This is an archive of the discontinued Mercurial Phabricator instance.

dirstate-v2: Update the expected output of some tests for new requirement
ClosedPublic

Authored by SimonSapin on May 17 2021, 6:05 AM.

Download Raw Diff

Details

Reviewers

durin42
Alphare

Group Reviewers

hg-reviewers

Commits

rHG40b51c28b242: dirstate-v2: Update the expected output of some tests for new requirement
rHG2008b3fa3fcd: dirstate-v2: Update the expected output of some tests for new requirement

Summary

Fix most test failures (except in test-narrow-debugrebuilddirstate.t and
test-upgrade-repo.t) caused by the new entry in config or in .hg/requires
when running run-tests.py --extra-config-opt format.exp-dirstate-v2=1

There is no CI so far for this configuration.

Diff Detail

Repository

rHG Mercurial

Branch

default

Lint

No Linters Available

Unit

No Unit Test Coverage

Event Timeline

SimonSapin created this revision.May 17 2021, 6:05 AM

Herald added a reviewer: durin42. · View Herald TranscriptMay 17 2021, 6:05 AM

Herald added a reviewer: hg-reviewers. · View Herald Transcript

Herald added a subscriber: mercurial-patches. · View Herald Transcript

SimonSapin added a child revision: D10719: dirstate-v2: Change the on-disk format when the requirement is enabled.May 17 2021, 6:05 AM

✅ refresh by Heptapod after a successful CI run (🐙 💚)

Alphare added a subscriber: Alphare.May 19 2021, 5:41 AM

Alphare added inline comments.

tests/hghave.py
1049	Should you be using `stringutil.parsebool` instead?
tests/test-config.t
162	That looks unrelated?

SimonSapin added inline comments.May 19 2021, 6:22 AM

tests/hghave.py
1049	Can we really import Mercurial modules from inside of `hghave.py`? That isn’t done so far
tests/test-config.t
162	Without this change, the `hg config format` command prints the whole `format` section of configuration including `format.exp-dirstate-v2`

Alphare accepted this revision.May 19 2021, 6:48 AM

Alphare added inline comments.

tests/hghave.py
1049	Right, probably not

This revision is now accepted and ready to land.May 19 2021, 6:48 AM

SimonSapin added a commit: rHG2008b3fa3fcd: dirstate-v2: Update the expected output of some tests for new requirement.May 19 2021, 7:14 AM

Closed by commit rHG2008b3fa3fcd: dirstate-v2: Update the expected output of some tests for new requirement (authored by SimonSapin). · Explain Why

This revision was automatically updated to reflect the committed changes.

✅ refresh by Heptapod after a successful CI run (🐙 💚)

SimonSapin added a commit: rHG40b51c28b242: dirstate-v2: Update the expected output of some tests for new requirement.May 19 2021, 7:44 AM

Revision Contents
Changeset List

			Path	Packages
M			mercurial/localrepo.py (1 line)
M			tests/hghave.py (8 lines)
M			tests/test-basic.t (1 line)
M			tests/test-clone-uncompressed.t (22 lines)
M			tests/test-commandserver.t (1 line)
M			tests/test-config.t (6 lines)
M			tests/test-init.t (8 lines)
M			tests/test-lfconvert.t (1 line)
M			tests/test-lfs-largefiles.t (1 line)
M			tests/test-narrow-clone-no-ellipsis.t (1 line)
M			tests/test-narrow-clone-stream.t (1 line)
M			tests/test-narrow-clone.t (1 line)
M			tests/test-narrow-sparse.t (1 line)
M			tests/test-persistent-nodemap.t (15 lines)
M			tests/test-phases.t (2 lines)
M			tests/test-remotefilelog-clone-tree.t (3 lines)
M			tests/test-remotefilelog-clone.t (3 lines)
M			tests/test-remotefilelog-log.t (1 line)
M			tests/test-repo-compengines.t (4 lines)
M			tests/test-requires.t (1 line)
M			tests/test-revlog-v2.t (1 line)
M			tests/test-share-safe.t (3 lines)
M			tests/test-sparse-requirement.t (3 lines)
M			tests/test-sqlitestore.t (4 lines)
M			tests/test-stream-bundle-v2.t (6 lines)

Diff	ID	Description	Created	Lint	Unit
Base		Base
Diff 1	27970		May 17 2021, 6:05 AM	★	★
Diff 2	27998		May 17 2021, 8:39 AM	★	★
Diff 3	28092	rHG2008b3fa3fcd71c0783f1819cd60b37f809dce00	May 11 2021, 4:39 AM	★	★
Diff 4	28099		May 19 2021, 7:41 AM	★	★

Commit	Parents	Author	Summary	Date
f237f71fabab	0b870aadde21	Simon Sapin		May 11 2021, 4:39 AM

Status	Author	Revision
Closed	SimonSapin	D10722 dirstate-v2: Change the on-disk format to be tree-shaped
Closed	SimonSapin	D10721 dirstate-tree: Extract into a method sorting children of a given node
Closed	SimonSapin	D10720 dirstate-v2: Add a variant of some tests, that uses the new format
Closed	SimonSapin	D10719 dirstate-v2: Change the on-disk format when the requirement is enabled
Closed	SimonSapin	D10718 dirstate-v2: Update the expected output of some tests for new requirement
Closed	SimonSapin	D10717 tests: More cleanly separate expected hexdump output
Closed	SimonSapin	D10716 dirstate-v2: Add a new experimental `exp-dirstate-v2` repository requirement

Diff 27970

mercurial/localrepo.py

	requirements.add(b'exp-compression-%s' % compengine)			requirements.add(b'exp-compression-%s' % compengine)

	if scmutil.gdinitconfig(ui):			if scmutil.gdinitconfig(ui):
	requirements.add(requirementsmod.GENERALDELTA_REQUIREMENT)			requirements.add(requirementsmod.GENERALDELTA_REQUIREMENT)
	if ui.configbool(b'format', b'sparse-revlog'):			if ui.configbool(b'format', b'sparse-revlog'):
	requirements.add(requirementsmod.SPARSEREVLOG_REQUIREMENT)			requirements.add(requirementsmod.SPARSEREVLOG_REQUIREMENT)

	# experimental config: format.exp-dirstate-v2			# experimental config: format.exp-dirstate-v2
				# Keep this logic in sync with `has_dirstate_v2()` in `tests/hghave.py`
	if ui.configbool(b'format', b'exp-dirstate-v2'):			if ui.configbool(b'format', b'exp-dirstate-v2'):
	if dirstate.SUPPORTS_DIRSTATE_V2:			if dirstate.SUPPORTS_DIRSTATE_V2:
	requirements.add(requirementsmod.DIRSTATE_V2_REQUIREMENT)			requirements.add(requirementsmod.DIRSTATE_V2_REQUIREMENT)
	else:			else:
	raise error.Abort(			raise error.Abort(
	_(			_(
	b"dirstate v2 format requested by config "			b"dirstate v2 format requested by config "
	b"but not supported (requires Rust extensions)"			b"but not supported (requires Rust extensions)"

tests/hghave.py

	return 'bundlerepo' in getrepofeatures()			return 'bundlerepo' in getrepofeatures()


	@check('repofncache', 'repository has an fncache')			@check('repofncache', 'repository has an fncache')
	def has_repofncache():			def has_repofncache():
	return 'fncache' in getrepofeatures()			return 'fncache' in getrepofeatures()


				@check('dirstate-v2', 'using the v2 format of .hg/dirstate')
				def has_dirstate_v2():
				# Keep this logic in sync with `newreporequirements()` in `mercurial/localrepo.py`
				return has_rust() and matchoutput(
				'hg config format.exp-dirstate-v2', b'(?i)1\|yes\|true\|on\|always'
				AlphareUnsubmitted Not Done Should you be using `stringutil.parsebool` instead? Alphare: Should you be using `stringutil.parsebool` instead?
				SimonSapinAuthorUnsubmitted Done Can we really import Mercurial modules from inside of `hghave.py`? That isn’t done so far SimonSapin: Can we really import Mercurial modules from inside of `hghave.py`? That isn’t done so far
				AlphareUnsubmitted Not Done Right, probably not Alphare: Right, probably not
				)


	@check('sqlite', 'sqlite3 module and matching cli is available')			@check('sqlite', 'sqlite3 module and matching cli is available')
	def has_sqlite():			def has_sqlite():
	try:			try:
	import sqlite3			import sqlite3

	version = sqlite3.sqlite_version_info			version = sqlite3.sqlite_version_info
	except ImportError:			except ImportError:
	return False			return False

tests/test-basic.t

	Create a repository:			Create a repository:

	#if no-extraextensions			#if no-extraextensions
	$ hg config			$ hg config
	devel.all-warnings=true			devel.all-warnings=true
	devel.default-date=0 0			devel.default-date=0 0
	extensions.fsmonitor= (fsmonitor !)			extensions.fsmonitor= (fsmonitor !)
				format.exp-dirstate-v2=1 (dirstate-v2 !)
	largefiles.usercache=$TESTTMP/.cache/largefiles			largefiles.usercache=$TESTTMP/.cache/largefiles
	lfs.usercache=$TESTTMP/.cache/lfs			lfs.usercache=$TESTTMP/.cache/lfs
	ui.slash=True			ui.slash=True
	ui.interactive=False			ui.interactive=False
	ui.detailed-exit-code=True			ui.detailed-exit-code=True
	ui.merge=internal:merge			ui.merge=internal:merge
	ui.mergemarkers=detailed			ui.mergemarkers=detailed
	ui.promptecho=True			ui.promptecho=True

tests/test-clone-uncompressed.t

	0090: 67 76 31 25 32 43 73 70 61 72 73 65 72 65 76 6c \|gv1%2Csparserevl\|			0090: 67 76 31 25 32 43 73 70 61 72 73 65 72 65 76 6c \|gv1%2Csparserevl\|
	00a0: 6f 67 25 32 43 73 74 6f 72 65 00 00 80 00 73 08 \|og%2Cstore....s.\|			00a0: 6f 67 25 32 43 73 74 6f 72 65 00 00 80 00 73 08 \|og%2Cstore....s.\|
	00b0: 42 64 61 74 61 2f 30 2e 69 00 03 00 01 00 00 00 \|Bdata/0.i.......\|			00b0: 42 64 61 74 61 2f 30 2e 69 00 03 00 01 00 00 00 \|Bdata/0.i.......\|
	00c0: 00 00 00 00 02 00 00 00 01 00 00 00 00 00 00 00 \|................\|			00c0: 00 00 00 00 02 00 00 00 01 00 00 00 00 00 00 00 \|................\|
	00d0: 01 ff ff ff ff ff ff ff ff 80 29 63 a0 49 d3 23 \|..........)c.I.#\|			00d0: 01 ff ff ff ff ff ff ff ff 80 29 63 a0 49 d3 23 \|..........)c.I.#\|
	00e0: 87 bf ce fe 56 67 92 67 2c 69 d1 ec 39 00 00 00 \|....Vg.g,i..9...\|			00e0: 87 bf ce fe 56 67 92 67 2c 69 d1 ec 39 00 00 00 \|....Vg.g,i..9...\|
	00f0: 00 00 00 00 00 00 00 00 00 75 30 73 08 42 64 61 \|.........u0s.Bda\|			00f0: 00 00 00 00 00 00 00 00 00 75 30 73 08 42 64 61 \|.........u0s.Bda\|
	#endif			#endif
	#if zstd rust			#if zstd rust no-dirstate-v2
	$ f --size --hex --bytes 256 body			$ f --size --hex --bytes 256 body
	body: size=109431			body: size=109431
	0000: 04 6e 6f 6e 65 48 47 32 30 00 00 00 00 00 00 00 \|.noneHG20.......\|			0000: 04 6e 6f 6e 65 48 47 32 30 00 00 00 00 00 00 00 \|.noneHG20.......\|
	0010: ae 07 53 54 52 45 41 4d 32 00 00 00 00 03 00 09 \|..STREAM2.......\|			0010: ae 07 53 54 52 45 41 4d 32 00 00 00 00 03 00 09 \|..STREAM2.......\|
	0020: 05 09 04 0c 73 62 79 74 65 63 6f 75 6e 74 39 35 \|....sbytecount95\|			0020: 05 09 04 0c 73 62 79 74 65 63 6f 75 6e 74 39 35 \|....sbytecount95\|
	0030: 38 39 37 66 69 6c 65 63 6f 75 6e 74 31 30 33 30 \|897filecount1030\|			0030: 38 39 37 66 69 6c 65 63 6f 75 6e 74 31 30 33 30 \|897filecount1030\|
	0040: 72 65 71 75 69 72 65 6d 65 6e 74 73 64 6f 74 65 \|requirementsdote\|			0040: 72 65 71 75 69 72 65 6d 65 6e 74 73 64 6f 74 65 \|requirementsdote\|
	0050: 6e 63 6f 64 65 25 32 43 66 6e 63 61 63 68 65 25 \|ncode%2Cfncache%\|			0050: 6e 63 6f 64 65 25 32 43 66 6e 63 61 63 68 65 25 \|ncode%2Cfncache%\|
	0060: 32 43 67 65 6e 65 72 61 6c 64 65 6c 74 61 25 32 \|2Cgeneraldelta%2\|			0060: 32 43 67 65 6e 65 72 61 6c 64 65 6c 74 61 25 32 \|2Cgeneraldelta%2\|
	0070: 43 70 65 72 73 69 73 74 65 6e 74 2d 6e 6f 64 65 \|Cpersistent-node\|			0070: 43 70 65 72 73 69 73 74 65 6e 74 2d 6e 6f 64 65 \|Cpersistent-node\|
	0080: 6d 61 70 25 32 43 72 65 76 6c 6f 67 2d 63 6f 6d \|map%2Crevlog-com\|			0080: 6d 61 70 25 32 43 72 65 76 6c 6f 67 2d 63 6f 6d \|map%2Crevlog-com\|
	0090: 70 72 65 73 73 69 6f 6e 2d 7a 73 74 64 25 32 43 \|pression-zstd%2C\|			0090: 70 72 65 73 73 69 6f 6e 2d 7a 73 74 64 25 32 43 \|pression-zstd%2C\|
	00a0: 72 65 76 6c 6f 67 76 31 25 32 43 73 70 61 72 73 \|revlogv1%2Cspars\|			00a0: 72 65 76 6c 6f 67 76 31 25 32 43 73 70 61 72 73 \|revlogv1%2Cspars\|
	00b0: 65 72 65 76 6c 6f 67 25 32 43 73 74 6f 72 65 00 \|erevlog%2Cstore.\|			00b0: 65 72 65 76 6c 6f 67 25 32 43 73 74 6f 72 65 00 \|erevlog%2Cstore.\|
	00c0: 00 80 00 73 08 42 64 61 74 61 2f 30 2e 69 00 03 \|...s.Bdata/0.i..\|			00c0: 00 80 00 73 08 42 64 61 74 61 2f 30 2e 69 00 03 \|...s.Bdata/0.i..\|
	00d0: 00 01 00 00 00 00 00 00 00 02 00 00 00 01 00 00 \|................\|			00d0: 00 01 00 00 00 00 00 00 00 02 00 00 00 01 00 00 \|................\|
	00e0: 00 00 00 00 00 01 ff ff ff ff ff ff ff ff 80 29 \|...............)\|			00e0: 00 00 00 00 00 01 ff ff ff ff ff ff ff ff 80 29 \|...............)\|
	00f0: 63 a0 49 d3 23 87 bf ce fe 56 67 92 67 2c 69 d1 \|c.I.#....Vg.g,i.\|			00f0: 63 a0 49 d3 23 87 bf ce fe 56 67 92 67 2c 69 d1 \|c.I.#....Vg.g,i.\|
	#endif			#endif
				#if zstd dirstate-v2
				$ f --size --hex --bytes 256 body
				body: size=109449
				0000: 04 6e 6f 6e 65 48 47 32 30 00 00 00 00 00 00 00 \|.noneHG20.......\|
				0010: c0 07 53 54 52 45 41 4d 32 00 00 00 00 03 00 09 \|..STREAM2.......\|
				0020: 05 09 04 0c 85 62 79 74 65 63 6f 75 6e 74 39 35 \|.....bytecount95\|
				0030: 38 39 37 66 69 6c 65 63 6f 75 6e 74 31 30 33 30 \|897filecount1030\|
				0040: 72 65 71 75 69 72 65 6d 65 6e 74 73 64 6f 74 65 \|requirementsdote\|
				0050: 6e 63 6f 64 65 25 32 43 65 78 70 2d 64 69 72 73 \|ncode%2Cexp-dirs\|
				0060: 74 61 74 65 2d 76 32 25 32 43 66 6e 63 61 63 68 \|tate-v2%2Cfncach\|
				0070: 65 25 32 43 67 65 6e 65 72 61 6c 64 65 6c 74 61 \|e%2Cgeneraldelta\|
				0080: 25 32 43 70 65 72 73 69 73 74 65 6e 74 2d 6e 6f \|%2Cpersistent-no\|
				0090: 64 65 6d 61 70 25 32 43 72 65 76 6c 6f 67 2d 63 \|demap%2Crevlog-c\|
				00a0: 6f 6d 70 72 65 73 73 69 6f 6e 2d 7a 73 74 64 25 \|ompression-zstd%\|
				00b0: 32 43 72 65 76 6c 6f 67 76 31 25 32 43 73 70 61 \|2Crevlogv1%2Cspa\|
				00c0: 72 73 65 72 65 76 6c 6f 67 25 32 43 73 74 6f 72 \|rserevlog%2Cstor\|
				00d0: 65 00 00 80 00 73 08 42 64 61 74 61 2f 30 2e 69 \|e....s.Bdata/0.i\|
				00e0: 00 03 00 01 00 00 00 00 00 00 00 02 00 00 00 01 \|................\|
				00f0: 00 00 00 00 00 00 00 01 ff ff ff ff ff ff ff ff \|................\|
				#endif

	--uncompressed is an alias to --stream			--uncompressed is an alias to --stream

	#if stream-legacy			#if stream-legacy
	$ hg clone --uncompressed -U http://localhost:$HGPORT clone1-uncompressed			$ hg clone --uncompressed -U http://localhost:$HGPORT clone1-uncompressed
	streaming all changes			streaming all changes
	1027 files to transfer, 96.3 KB of data (no-zstd !)			1027 files to transfer, 96.3 KB of data (no-zstd !)
	transferred 96.3 KB in * seconds (*/sec) (glob) (no-zstd !)			transferred 96.3 KB in * seconds (*/sec) (glob) (no-zstd !)

tests/test-commandserver.t

	... # but not for this repo			... # but not for this repo
	... runcommand(server, [b'init', b'foo'])			... runcommand(server, [b'init', b'foo'])
	... runcommand(server, [b'-R', b'foo', b'showconfig', b'ui', b'defaults'])			... runcommand(server, [b'-R', b'foo', b'showconfig', b'ui', b'defaults'])
	*** runcommand showconfig			*** runcommand showconfig
	bundle.mainreporoot=$TESTTMP/repo			bundle.mainreporoot=$TESTTMP/repo
	devel.all-warnings=true			devel.all-warnings=true
	devel.default-date=0 0			devel.default-date=0 0
	extensions.fsmonitor= (fsmonitor !)			extensions.fsmonitor= (fsmonitor !)
				format.exp-dirstate-v2=1 (dirstate-v2 !)
	largefiles.usercache=$TESTTMP/.cache/largefiles			largefiles.usercache=$TESTTMP/.cache/largefiles
	lfs.usercache=$TESTTMP/.cache/lfs			lfs.usercache=$TESTTMP/.cache/lfs
	ui.slash=True			ui.slash=True
	ui.interactive=False			ui.interactive=False
	ui.detailed-exit-code=True			ui.detailed-exit-code=True
	ui.merge=internal:merge			ui.merge=internal:merge
	ui.mergemarkers=detailed			ui.mergemarkers=detailed
	ui.timeout.warn=15			ui.timeout.warn=15

tests/test-config.t

	[			[
	{"defaultvalue": false}			{"defaultvalue": false}
	]			]
	$ hg config --config commands.commit.post-status= commands -T'{defaultvalue}\n'			$ hg config --config commands.commit.post-status= commands -T'{defaultvalue}\n'
	False			False

	true			true

	$ hg config --config format.dotencode= format -Tjson			$ hg config --config format.dotencode= format.dotencode -Tjson
				AlphareUnsubmitted Not Done That looks unrelated? Alphare: That looks unrelated?
				SimonSapinAuthorUnsubmitted Done Without this change, the `hg config format` command prints the whole `format` section of configuration including `format.exp-dirstate-v2` SimonSapin: Without this change, the `hg config format` command prints the whole `format` section of…
	[			[
	{			{
	"defaultvalue": true,			"defaultvalue": true,
	"name": "format.dotencode",			"name": "format.dotencode",
	"source": "--config",			"source": "--config",
	"value": ""			"value": ""
	}			}
	]			]
	$ hg config --config format.dotencode= format -T'json(defaultvalue)'			$ hg config --config format.dotencode= format.dotencode -T'json(defaultvalue)'
	[			[
	{"defaultvalue": true}			{"defaultvalue": true}
	]			]
	$ hg config --config format.dotencode= format -T'{defaultvalue}\n'			$ hg config --config format.dotencode= format.dotencode -T'{defaultvalue}\n'
	True			True

	bytes			bytes

	$ hg config --config commands.resolve.mark-check= commands -Tjson			$ hg config --config commands.resolve.mark-check= commands -Tjson
	[			[
	{			{
	"defaultvalue": "none",			"defaultvalue": "none",

tests/test-init.t


	creating 'local'			creating 'local'

	$ hg init local			$ hg init local
	$ checknewrepo local			$ checknewrepo local
	store created			store created
	00changelog.i created			00changelog.i created
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	testonly-simplestore (reposimplestore !)			testonly-simplestore (reposimplestore !)
	@@ -0,0 +1,1 @@			@@ -0,0 +1,1 @@
	+this			+this


	creating repo with format.usestore=false			creating repo with format.usestore=false

	$ hg --config format.usestore=false init old			$ hg --config format.usestore=false init old
	$ checknewrepo old			$ checknewrepo old
				exp-dirstate-v2 (dirstate-v2 !)
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	testonly-simplestore (reposimplestore !)			testonly-simplestore (reposimplestore !)
	sparserevlog			sparserevlog

	creating repo with format.usefncache=false			creating repo with format.usefncache=false

	$ hg --config format.usefncache=false init old2			$ hg --config format.usefncache=false init old2
	$ checknewrepo old2			$ checknewrepo old2
	store created			store created
	00changelog.i created			00changelog.i created
				exp-dirstate-v2 (dirstate-v2 !)
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	testonly-simplestore (reposimplestore !)			testonly-simplestore (reposimplestore !)

	creating repo with format.dotencode=false			creating repo with format.dotencode=false

	$ hg --config format.dotencode=false init old3			$ hg --config format.dotencode=false init old3
	$ checknewrepo old3			$ checknewrepo old3
	store created			store created
	00changelog.i created			00changelog.i created
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	testonly-simplestore (reposimplestore !)			testonly-simplestore (reposimplestore !)

	creating repo with format.dotencode=false			creating repo with format.dotencode=false

	$ hg --config format.generaldelta=false --config format.usegeneraldelta=false --config format.sparse-revlog=no init old4			$ hg --config format.generaldelta=false --config format.usegeneraldelta=false --config format.sparse-revlog=no init old4
	$ checknewrepo old4			$ checknewrepo old4
	store created			store created
	00changelog.i created			00changelog.i created
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	store			store
	testonly-simplestore (reposimplestore !)			testonly-simplestore (reposimplestore !)

	test failure			test failure

	creating 'local/sub/repo'			creating 'local/sub/repo'

	$ hg init local/sub/repo			$ hg init local/sub/repo
	$ checknewrepo local/sub/repo			$ checknewrepo local/sub/repo
	store created			store created
	00changelog.i created			00changelog.i created
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	testonly-simplestore (reposimplestore !)			testonly-simplestore (reposimplestore !)

	prepare test of init of url configured from paths			prepare test of init of url configured from paths

	$ echo '[paths]' >> $HGRCPATH			$ echo '[paths]' >> $HGRCPATH
	$ echo "somewhere = `pwd`/url from paths" >> $HGRCPATH			$ echo "somewhere = `pwd`/url from paths" >> $HGRCPATH
	$ echo "elsewhere = `pwd`/another paths url" >> $HGRCPATH			$ echo "elsewhere = `pwd`/another paths url" >> $HGRCPATH

	init should (for consistency with clone) expand the url			init should (for consistency with clone) expand the url

	$ hg init somewhere			$ hg init somewhere
	$ checknewrepo "url from paths"			$ checknewrepo "url from paths"
	store created			store created
	00changelog.i created			00changelog.i created
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	testonly-simplestore (reposimplestore !)			testonly-simplestore (reposimplestore !)

	verify that clone also expand urls			verify that clone also expand urls

	$ hg clone somewhere elsewhere			$ hg clone somewhere elsewhere
	updating to branch default			updating to branch default
	0 files updated, 0 files merged, 0 files removed, 0 files unresolved			0 files updated, 0 files merged, 0 files removed, 0 files unresolved
	$ checknewrepo "another paths url"			$ checknewrepo "another paths url"
	store created			store created
	00changelog.i created			00changelog.i created
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	testonly-simplestore (reposimplestore !)			testonly-simplestore (reposimplestore !)

tests/test-lfconvert.t

	alsonormal			alsonormal
	$ md5sum.py large sub/maybelarge.dat			$ md5sum.py large sub/maybelarge.dat
	ec87a838931d4d5d2e94a04644788a55 large			ec87a838931d4d5d2e94a04644788a55 large
	1276481102f218c981e0324180bafd9f sub/maybelarge.dat			1276481102f218c981e0324180bafd9f sub/maybelarge.dat

	"lfconvert" adds 'largefiles' to .hg/requires.			"lfconvert" adds 'largefiles' to .hg/requires.
	$ cat .hg/requires			$ cat .hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	generaldelta			generaldelta
	largefiles			largefiles
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store

tests/test-lfs-largefiles.t

	1 large by size			1 large by size
	0 remove large_by_size.bin			0 remove large_by_size.bin
	$ cd nolargefiles			$ cd nolargefiles

	The requirement is added to the destination repo.			The requirement is added to the destination repo.

	$ cat .hg/requires			$ cat .hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	generaldelta			generaldelta
	lfs			lfs
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store

tests/test-narrow-clone-no-ellipsis.t

	adding changesets			adding changesets
	adding manifests			adding manifests
	adding file changes			adding file changes
	added 40 changesets with 1 changes to 1 files			added 40 changesets with 1 changes to 1 files
	new changesets : (glob)			new changesets : (glob)
	$ cd narrow			$ cd narrow
	$ cat .hg/requires \| grep -v generaldelta			$ cat .hg/requires \| grep -v generaldelta
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	narrowhg-experimental			narrowhg-experimental
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	testonly-simplestore (reposimplestore !)			testonly-simplestore (reposimplestore !)

tests/test-narrow-clone-stream.t

	$ hg tracked			$ hg tracked
	I path:dir/src/F10			I path:dir/src/F10

	Making sure we have the correct set of requirements			Making sure we have the correct set of requirements

	$ cat .hg/requires			$ cat .hg/requires
	dotencode (tree !)			dotencode (tree !)
	dotencode (flat-fncache !)			dotencode (flat-fncache !)
				exp-dirstate-v2 (dirstate-v2 !)
	fncache (tree !)			fncache (tree !)
	fncache (flat-fncache !)			fncache (flat-fncache !)
	generaldelta			generaldelta
	narrowhg-experimental			narrowhg-experimental
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog

tests/test-narrow-clone.t

	adding changesets			adding changesets
	adding manifests			adding manifests
	adding file changes			adding file changes
	added 3 changesets with 1 changes to 1 files			added 3 changesets with 1 changes to 1 files
	new changesets : (glob)			new changesets : (glob)
	$ cd narrow			$ cd narrow
	$ cat .hg/requires \| grep -v generaldelta			$ cat .hg/requires \| grep -v generaldelta
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	narrowhg-experimental			narrowhg-experimental
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	testonly-simplestore (reposimplestore !)			testonly-simplestore (reposimplestore !)

tests/test-narrow-sparse.t

	inside/f			inside/f

	XXX: we should have a flag in `hg debugsparse` to list the sparse profile			XXX: we should have a flag in `hg debugsparse` to list the sparse profile
	$ test -f .hg/sparse			$ test -f .hg/sparse
	[1]			[1]

	$ cat .hg/requires			$ cat .hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	generaldelta			generaldelta
	narrowhg-experimental			narrowhg-experimental
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	treemanifest (tree !)			treemanifest (tree !)

	$ hg debugrebuilddirstate			$ hg debugrebuilddirstate

tests/test-persistent-nodemap.t

	plain-cl-delta: yes yes yes			plain-cl-delta: yes yes yes
	compression: zlib zlib zlib (no-zstd !)			compression: zlib zlib zlib (no-zstd !)
	compression: zstd zstd zstd (zstd !)			compression: zstd zstd zstd (zstd !)
	compression-level: default default default			compression-level: default default default
	$ hg debugupgraderepo --run --no-backup			$ hg debugupgraderepo --run --no-backup
	upgrade will perform the following actions:			upgrade will perform the following actions:

	requirements			requirements
	preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-zstd !)			preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-zstd no-dirstate-v2 !)
	preserved: dotencode, fncache, generaldelta, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd !)			preserved: dotencode, fncache, generaldelta, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd no-dirstate-v2 !)
				preserved: dotencode, exp-dirstate-v2, fncache, generaldelta, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd dirstate-v2 !)
	removed: persistent-nodemap			removed: persistent-nodemap

	processed revlogs:			processed revlogs:
	- all-filelogs			- all-filelogs
	- changelog			- changelog
	- manifest			- manifest

	beginning upgrade...			beginning upgrade...
	plain-cl-delta: yes yes yes			plain-cl-delta: yes yes yes
	compression: zlib zlib zlib (no-zstd !)			compression: zlib zlib zlib (no-zstd !)
	compression: zstd zstd zstd (zstd !)			compression: zstd zstd zstd (zstd !)
	compression-level: default default default			compression-level: default default default
	$ hg debugupgraderepo --run --no-backup			$ hg debugupgraderepo --run --no-backup
	upgrade will perform the following actions:			upgrade will perform the following actions:

	requirements			requirements
	preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-zstd !)			preserved: dotencode, fncache, generaldelta, revlogv1, sparserevlog, store (no-zstd no-dirstate-v2 !)
	preserved: dotencode, fncache, generaldelta, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd !)			preserved: dotencode, fncache, generaldelta, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd no-dirstate-v2 !)
				preserved: dotencode, exp-dirstate-v2, fncache, generaldelta, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd dirstate-v2 !)
	added: persistent-nodemap			added: persistent-nodemap

	persistent-nodemap			persistent-nodemap
	Speedup revision lookup by node id.			Speedup revision lookup by node id.

	processed revlogs:			processed revlogs:
	- all-filelogs			- all-filelogs
	- changelog			- changelog
	data-unused: 0.000%			data-unused: 0.000%

	Running unrelated upgrade			Running unrelated upgrade

	$ hg debugupgraderepo --run --no-backup --quiet --optimize re-delta-all			$ hg debugupgraderepo --run --no-backup --quiet --optimize re-delta-all
	upgrade will perform the following actions:			upgrade will perform the following actions:

	requirements			requirements
	preserved: dotencode, fncache, generaldelta, persistent-nodemap, revlogv1, sparserevlog, store (no-zstd !)			preserved: dotencode, fncache, generaldelta, persistent-nodemap, revlogv1, sparserevlog, store (no-zstd no-dirstate-v2 !)
	preserved: dotencode, fncache, generaldelta, persistent-nodemap, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd !)			preserved: dotencode, fncache, generaldelta, persistent-nodemap, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd no-dirstate-v2 !)
				preserved: dotencode, exp-dirstate-v2, fncache, generaldelta, persistent-nodemap, revlog-compression-zstd, revlogv1, sparserevlog, store (zstd dirstate-v2 !)

	optimisations: re-delta-all			optimisations: re-delta-all

	processed revlogs:			processed revlogs:
	- all-filelogs			- all-filelogs
	- changelog			- changelog
	- manifest			- manifest

tests/test-phases.t

	=============================			=============================

	Check we deny its usage on older repository			Check we deny its usage on older repository

	$ hg init no-internal-phase --config format.internal-phase=no			$ hg init no-internal-phase --config format.internal-phase=no
	$ cd no-internal-phase			$ cd no-internal-phase
	$ cat .hg/requires			$ cat .hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	$ echo X > X			$ echo X > X
	$ cd ..			$ cd ..

	Check it works fine with repository that supports it.			Check it works fine with repository that supports it.

	$ hg init internal-phase --config format.internal-phase=yes			$ hg init internal-phase --config format.internal-phase=yes
	$ cd internal-phase			$ cd internal-phase
	$ cat .hg/requires			$ cat .hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	generaldelta			generaldelta
	internal-phase			internal-phase
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store

tests/test-remotefilelog-clone-tree.t

	streaming all changes			streaming all changes
	4 files to transfer, 449 bytes of data			4 files to transfer, 449 bytes of data
	transferred 449 bytes in * seconds (*/sec) (glob)			transferred 449 bytes in * seconds (*/sec) (glob)
	searching for changes			searching for changes
	no changes found			no changes found
	$ cd shallow			$ cd shallow
	$ cat .hg/requires			$ cat .hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	exp-remotefilelog-repo-req-1			exp-remotefilelog-repo-req-1
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	streaming all changes			streaming all changes
	5 files to transfer, 1008 bytes of data			5 files to transfer, 1008 bytes of data
	transferred 1008 bytes in * seconds (*/sec) (glob)			transferred 1008 bytes in * seconds (*/sec) (glob)
	searching for changes			searching for changes
	no changes found			no changes found
	$ cd shallow2			$ cd shallow2
	$ cat .hg/requires			$ cat .hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	exp-remotefilelog-repo-req-1			exp-remotefilelog-repo-req-1
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	added 1 changesets with 0 changes to 0 files			added 1 changesets with 0 changes to 0 files
	new changesets 18d955ee7ba0			new changesets 18d955ee7ba0
	updating to branch default			updating to branch default
	1 files updated, 0 files merged, 0 files removed, 0 files unresolved			1 files updated, 0 files merged, 0 files removed, 0 files unresolved

	$ ls shallow3/.hg/store/data			$ ls shallow3/.hg/store/data
	$ cat shallow3/.hg/requires			$ cat shallow3/.hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	exp-remotefilelog-repo-req-1			exp-remotefilelog-repo-req-1
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	treemanifest			treemanifest

tests/test-remotefilelog-clone.t

	streaming all changes			streaming all changes
	2 files to transfer, 227 bytes of data			2 files to transfer, 227 bytes of data
	transferred 227 bytes in * seconds (*/sec) (glob)			transferred 227 bytes in * seconds (*/sec) (glob)
	searching for changes			searching for changes
	no changes found			no changes found
	$ cd shallow			$ cd shallow
	$ cat .hg/requires			$ cat .hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	exp-remotefilelog-repo-req-1			exp-remotefilelog-repo-req-1
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	streaming all changes			streaming all changes
	3 files to transfer, 564 bytes of data			3 files to transfer, 564 bytes of data
	transferred 564 bytes in * seconds (*/sec) (glob)			transferred 564 bytes in * seconds (*/sec) (glob)
	searching for changes			searching for changes
	no changes found			no changes found
	$ cd shallow2			$ cd shallow2
	$ cat .hg/requires			$ cat .hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	exp-remotefilelog-repo-req-1			exp-remotefilelog-repo-req-1
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	added 1 changesets with 0 changes to 0 files			added 1 changesets with 0 changes to 0 files
	new changesets b292c1e3311f			new changesets b292c1e3311f
	updating to branch default			updating to branch default
	1 files updated, 0 files merged, 0 files removed, 0 files unresolved			1 files updated, 0 files merged, 0 files removed, 0 files unresolved

	$ ls shallow3/.hg/store/data			$ ls shallow3/.hg/store/data
	$ cat shallow3/.hg/requires			$ cat shallow3/.hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	exp-remotefilelog-repo-req-1			exp-remotefilelog-repo-req-1
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store

tests/test-remotefilelog-log.t

	streaming all changes			streaming all changes
	2 files to transfer, 473 bytes of data			2 files to transfer, 473 bytes of data
	transferred 473 bytes in * seconds (*/sec) (glob)			transferred 473 bytes in * seconds (*/sec) (glob)
	searching for changes			searching for changes
	no changes found			no changes found
	$ cd shallow			$ cd shallow
	$ cat .hg/requires			$ cat .hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	exp-remotefilelog-repo-req-1			exp-remotefilelog-repo-req-1
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store

tests/test-repo-compengines.t

	A new repository uses zlib storage, which doesn't need a requirement			A new repository uses zlib storage, which doesn't need a requirement

	$ cat << EOF >> $HGRCPATH			$ cat << EOF >> $HGRCPATH
	> [format]			> [format]
	> # stabilize test accross variant			> # stabilize test accross variant
	> revlog-compression=zlib			> revlog-compression=zlib
	> EOF			> EOF


	$ hg init default			$ hg init default
	$ cd default			$ cd default
	$ cat .hg/requires			$ cat .hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	testonly-simplestore (reposimplestore !)			testonly-simplestore (reposimplestore !)

	with that engine or a requirement			with that engine or a requirement

	$ cd default			$ cd default
	$ touch bar			$ touch bar
	$ hg --config format.revlog-compression=none -q commit -A -m 'add bar with a lot of repeated repeated repeated text'			$ hg --config format.revlog-compression=none -q commit -A -m 'add bar with a lot of repeated repeated repeated text'

	$ cat .hg/requires			$ cat .hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	testonly-simplestore (reposimplestore !)			testonly-simplestore (reposimplestore !)

	$ hg debugrevlog -c \| grep 0x78			$ hg debugrevlog -c \| grep 0x78
	0x78 (x) : 2 (100.00%)			0x78 (x) : 2 (100.00%)
	0x78 (x) : 199 (100.00%)			0x78 (x) : 199 (100.00%)
	$ cd ..			$ cd ..

	#if zstd			#if zstd

	$ hg --config format.revlog-compression=zstd init zstd			$ hg --config format.revlog-compression=zstd init zstd
	$ cd zstd			$ cd zstd
	$ cat .hg/requires			$ cat .hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd			revlog-compression-zstd
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	testonly-simplestore (reposimplestore !)			testonly-simplestore (reposimplestore !)
	user: test			user: test
	date: Thu Jan 01 00:00:00 1970 +0000			date: Thu Jan 01 00:00:00 1970 +0000
	summary: some-commit			summary: some-commit


	$ cat none-compression/.hg/requires			$ cat none-compression/.hg/requires
	dotencode			dotencode
	exp-compression-none			exp-compression-none
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	testonly-simplestore (reposimplestore !)			testonly-simplestore (reposimplestore !)

tests/test-requires.t

	> EOF			> EOF
	$ cat > supported/.hg/hgrc <<EOF			$ cat > supported/.hg/hgrc <<EOF
	> [extensions]			> [extensions]
	> # enable extension locally			> # enable extension locally
	> supportlocally = $TESTTMP/supported-locally/supportlocally.py			> supportlocally = $TESTTMP/supported-locally/supportlocally.py
	> EOF			> EOF
	$ hg -R supported debugrequirements			$ hg -R supported debugrequirements
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	featuresetup-test			featuresetup-test
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store

tests/test-revlog-v2.t

	> [experimental]			> [experimental]
	> revlogv2 = enable-unstable-format-and-corrupt-my-data			> revlogv2 = enable-unstable-format-and-corrupt-my-data
	> EOF			> EOF

	$ hg init empty-repo			$ hg init empty-repo
	$ cd empty-repo			$ cd empty-repo
	$ cat .hg/requires			$ cat .hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	exp-revlogv2.2			exp-revlogv2.2
	fncache			fncache
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	sparserevlog			sparserevlog
	store			store

	$ hg log			$ hg log

tests/test-share-safe.t

	setup			setup

	$ cat >> $HGRCPATH <<EOF			$ cat >> $HGRCPATH <<EOF
	> [extensions]			> [extensions]
	> share =			> share =
	> [format]			> [format]
	> use-share-safe = True			> use-share-safe = True
	> [storage]			> [storage]
	> revlog.persistent-nodemap.slow-path=allow			> revlog.persistent-nodemap.slow-path=allow
	> # enforce zlib to ensure we can upgrade to zstd later			> # enforce zlib to ensure we can upgrade to zstd later
	> [format]			> [format]
	> revlog-compression=zlib			> revlog-compression=zlib
	> # we want to be able to enable it later			> # we want to be able to enable it later
	> use-persistent-nodemap=no			> use-persistent-nodemap=no
				> exp-dirstate-v2=no
	> EOF			> EOF

				TODO: add tests with share and dirstate-v2

	prepare source repo			prepare source repo

	$ hg init source			$ hg init source
	$ cd source			$ cd source
	$ cat .hg/requires			$ cat .hg/requires
	share-safe			share-safe
	$ cat .hg/store/requires			$ cat .hg/store/requires
	dotencode			dotencode

tests/test-sparse-requirement.t

	$ echo 1 > a.html			$ echo 1 > a.html
	$ echo 1 > c.py			$ echo 1 > c.py
	$ hg commit -m 'commit 1'			$ hg commit -m 'commit 1'

	Enable sparse profile			Enable sparse profile

	$ cat .hg/requires			$ cat .hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	testonly-simplestore (reposimplestore !)			testonly-simplestore (reposimplestore !)

	$ hg debugsparse --config extensions.sparse= --enable-profile frontend.sparse			$ hg debugsparse --config extensions.sparse= --enable-profile frontend.sparse
	$ ls -A			$ ls -A
	.hg			.hg
	a.html			a.html
	b.html			b.html

	Requirement for sparse added when sparse is enabled			Requirement for sparse added when sparse is enabled

	$ cat .hg/requires			$ cat .hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	exp-sparse			exp-sparse
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	testonly-simplestore (reposimplestore !)			testonly-simplestore (reposimplestore !)

	Client without sparse enabled reacts properly			Client without sparse enabled reacts properly

	$ hg files			$ hg files
	abort: repository is using sparse feature but sparse is not enabled; enable the "sparse" extensions to access			abort: repository is using sparse feature but sparse is not enabled; enable the "sparse" extensions to access
	[255]			[255]

	Requirement for sparse is removed when sparse is disabled			Requirement for sparse is removed when sparse is disabled

	$ hg debugsparse --reset --config extensions.sparse=			$ hg debugsparse --reset --config extensions.sparse=

	$ cat .hg/requires			$ cat .hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store
	testonly-simplestore (reposimplestore !)			testonly-simplestore (reposimplestore !)

tests/test-sqlitestore.t

	> sqlitestore =			> sqlitestore =
	> EOF			> EOF

	New repo should not use SQLite by default			New repo should not use SQLite by default

	$ hg init empty-no-sqlite			$ hg init empty-no-sqlite
	$ cat empty-no-sqlite/.hg/requires			$ cat empty-no-sqlite/.hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store

	storage.new-repo-backend=sqlite is recognized			storage.new-repo-backend=sqlite is recognized

	$ hg --config storage.new-repo-backend=sqlite init empty-sqlite			$ hg --config storage.new-repo-backend=sqlite init empty-sqlite
	$ cat empty-sqlite/.hg/requires			$ cat empty-sqlite/.hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	exp-sqlite-001			exp-sqlite-001
	exp-sqlite-comp-001=zstd (zstd !)			exp-sqlite-comp-001=zstd (zstd !)
	exp-sqlite-comp-001=$BUNDLE2_COMPRESSIONS$ (no-zstd !)			exp-sqlite-comp-001=$BUNDLE2_COMPRESSIONS$ (no-zstd !)
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store

	$ cat >> $HGRCPATH << EOF			$ cat >> $HGRCPATH << EOF
	> [storage]			> [storage]
	> new-repo-backend = sqlite			> new-repo-backend = sqlite
	> EOF			> EOF

	Can force compression to zlib			Can force compression to zlib

	$ hg --config storage.sqlite.compression=zlib init empty-zlib			$ hg --config storage.sqlite.compression=zlib init empty-zlib
	$ cat empty-zlib/.hg/requires			$ cat empty-zlib/.hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	exp-sqlite-001			exp-sqlite-001
	exp-sqlite-comp-001=$BUNDLE2_COMPRESSIONS$			exp-sqlite-comp-001=$BUNDLE2_COMPRESSIONS$
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog
	store			store

	Can force compression to none			Can force compression to none

	$ hg --config storage.sqlite.compression=none init empty-none			$ hg --config storage.sqlite.compression=none init empty-none
	$ cat empty-none/.hg/requires			$ cat empty-none/.hg/requires
	dotencode			dotencode
				exp-dirstate-v2 (dirstate-v2 !)
	exp-sqlite-001			exp-sqlite-001
	exp-sqlite-comp-001=none			exp-sqlite-comp-001=none
	fncache			fncache
	generaldelta			generaldelta
	persistent-nodemap (rust !)			persistent-nodemap (rust !)
	revlog-compression-zstd (zstd !)			revlog-compression-zstd (zstd !)
	revlogv1			revlogv1
	sparserevlog			sparserevlog

tests/test-stream-bundle-v2.t

	> A			> A
	> EOF			> EOF

	$ hg bundle -a --type="none-v2;stream=v2" bundle.hg			$ hg bundle -a --type="none-v2;stream=v2" bundle.hg
	$ hg debugbundle bundle.hg			$ hg debugbundle bundle.hg
	Stream params: {}			Stream params: {}
	stream2 -- {bytecount: 1693, filecount: 11, requirements: dotencode%2Cfncache%2Cgeneraldelta%2Crevlogv1%2Csparserevlog%2Cstore} (mandatory: True) (no-zstd !)			stream2 -- {bytecount: 1693, filecount: 11, requirements: dotencode%2Cfncache%2Cgeneraldelta%2Crevlogv1%2Csparserevlog%2Cstore} (mandatory: True) (no-zstd !)
	stream2 -- {bytecount: 1693, filecount: 11, requirements: dotencode%2Cfncache%2Cgeneraldelta%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore} (mandatory: True) (zstd no-rust !)			stream2 -- {bytecount: 1693, filecount: 11, requirements: dotencode%2Cfncache%2Cgeneraldelta%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore} (mandatory: True) (zstd no-rust !)
	stream2 -- {bytecount: 1693, filecount: 11, requirements: dotencode%2Cfncache%2Cgeneraldelta%2Cpersistent-nodemap%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore} (mandatory: True) (rust !)			stream2 -- {bytecount: 1693, filecount: 11, requirements: dotencode%2Cfncache%2Cgeneraldelta%2Cpersistent-nodemap%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore} (mandatory: True) (rust no-dirstate-v2 !)
				stream2 -- {bytecount: 1693, filecount: 11, requirements: dotencode%2Cexp-dirstate-v2%2Cfncache%2Cgeneraldelta%2Cpersistent-nodemap%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore} (mandatory: True) (dirstate-v2 !)
	$ hg debugbundle --spec bundle.hg			$ hg debugbundle --spec bundle.hg
	none-v2;stream=v2;requirements%3Ddotencode%2Cfncache%2Cgeneraldelta%2Crevlogv1%2Csparserevlog%2Cstore (no-zstd !)			none-v2;stream=v2;requirements%3Ddotencode%2Cfncache%2Cgeneraldelta%2Crevlogv1%2Csparserevlog%2Cstore (no-zstd !)
	none-v2;stream=v2;requirements%3Ddotencode%2Cfncache%2Cgeneraldelta%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore (zstd no-rust !)			none-v2;stream=v2;requirements%3Ddotencode%2Cfncache%2Cgeneraldelta%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore (zstd no-rust !)
	none-v2;stream=v2;requirements%3Ddotencode%2Cfncache%2Cgeneraldelta%2Cpersistent-nodemap%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore (rust !)			none-v2;stream=v2;requirements%3Ddotencode%2Cfncache%2Cgeneraldelta%2Cpersistent-nodemap%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore (rust no-dirstate-v2 !)
				none-v2;stream=v2;requirements%3Ddotencode%2Cexp-dirstate-v2%2Cfncache%2Cgeneraldelta%2Cpersistent-nodemap%2Crevlog-compression-zstd%2Crevlogv1%2Csparserevlog%2Cstore (dirstate-v2 !)

	Test that we can apply the bundle as a stream clone bundle			Test that we can apply the bundle as a stream clone bundle

	$ cat > .hg/clonebundles.manifest << EOF			$ cat > .hg/clonebundles.manifest << EOF
	> http://localhost:$HGPORT1/bundle.hg BUNDLESPEC=`hg debugbundle --spec bundle.hg`			> http://localhost:$HGPORT1/bundle.hg BUNDLESPEC=`hg debugbundle --spec bundle.hg`
	> EOF			> EOF

	$ hg serve -d -p $HGPORT --pid-file hg.pid --accesslog access.log			$ hg serve -d -p $HGPORT --pid-file hg.pid --accesslog access.log

	0090: 67 76 31 25 32 43 73 70 61 72 73 65 72 65 76 6c \|gv1%2Csparserevl\|			0090: 67 76 31 25 32 43 73 70 61 72 73 65 72 65 76 6c \|gv1%2Csparserevl\|
	00a0: 6f 67 25 32 43 73 74 6f 72 65 00 00 80 00 73 08 \|og%2Cstore....s.\|			00a0: 6f 67 25 32 43 73 74 6f 72 65 00 00 80 00 73 08 \|og%2Cstore....s.\|
	00b0: 42 64 61 74 61 2f 30 2e 69 00 03 00 01 00 00 00 \|Bdata/0.i.......\|			00b0: 42 64 61 74 61 2f 30 2e 69 00 03 00 01 00 00 00 \|Bdata/0.i.......\|
	00c0: 00 00 00 00 02 00 00 00 01 00 00 00 00 00 00 00 \|................\|			00c0: 00 00 00 00 02 00 00 00 01 00 00 00 00 00 00 00 \|................\|
	00d0: 01 ff ff ff ff ff ff ff ff 80 29 63 a0 49 d3 23 \|..........)c.I.#\|			00d0: 01 ff ff ff ff ff ff ff ff 80 29 63 a0 49 d3 23 \|..........)c.I.#\|
	00e0: 87 bf ce fe 56 67 92 67 2c 69 d1 ec 39 00 00 00 \|....Vg.g,i..9...\|			00e0: 87 bf ce fe 56 67 92 67 2c 69 d1 ec 39 00 00 00 \|....Vg.g,i..9...\|
	00f0: 00 00 00 00 00 00 00 00 00 75 30 73 08 42 64 61 \|.........u0s.Bda\|			00f0: 00 00 00 00 00 00 00 00 00 75 30 73 08 42 64 61 \|.........u0s.Bda\|
	#endif			#endif
	#if zstd rust			#if zstd rust no-dirstate-v2
	$ f --size --hex --bytes 256 body			$ f --size --hex --bytes 256 body
	body: size=109431			body: size=109431
	0000: 04 6e 6f 6e 65 48 47 32 30 00 00 00 00 00 00 00 \|.noneHG20.......\|			0000: 04 6e 6f 6e 65 48 47 32 30 00 00 00 00 00 00 00 \|.noneHG20.......\|
	0010: ae 07 53 54 52 45 41 4d 32 00 00 00 00 03 00 09 \|..STREAM2.......\|			0010: ae 07 53 54 52 45 41 4d 32 00 00 00 00 03 00 09 \|..STREAM2.......\|
	0020: 05 09 04 0c 73 62 79 74 65 63 6f 75 6e 74 39 35 \|....sbytecount95\|			0020: 05 09 04 0c 73 62 79 74 65 63 6f 75 6e 74 39 35 \|....sbytecount95\|
	0030: 38 39 37 66 69 6c 65 63 6f 75 6e 74 31 30 33 30 \|897filecount1030\|			0030: 38 39 37 66 69 6c 65 63 6f 75 6e 74 31 30 33 30 \|897filecount1030\|
	0040: 72 65 71 75 69 72 65 6d 65 6e 74 73 64 6f 74 65 \|requirementsdote\|			0040: 72 65 71 75 69 72 65 6d 65 6e 74 73 64 6f 74 65 \|requirementsdote\|
	0050: 6e 63 6f 64 65 25 32 43 66 6e 63 61 63 68 65 25 \|ncode%2Cfncache%\|			0050: 6e 63 6f 64 65 25 32 43 66 6e 63 61 63 68 65 25 \|ncode%2Cfncache%\|
	0060: 32 43 67 65 6e 65 72 61 6c 64 65 6c 74 61 25 32 \|2Cgeneraldelta%2\|			0060: 32 43 67 65 6e 65 72 61 6c 64 65 6c 74 61 25 32 \|2Cgeneraldelta%2\|
	0070: 43 70 65 72 73 69 73 74 65 6e 74 2d 6e 6f 64 65 \|Cpersistent-node\|			0070: 43 70 65 72 73 69 73 74 65 6e 74 2d 6e 6f 64 65 \|Cpersistent-node\|
	0080: 6d 61 70 25 32 43 72 65 76 6c 6f 67 2d 63 6f 6d \|map%2Crevlog-com\|			0080: 6d 61 70 25 32 43 72 65 76 6c 6f 67 2d 63 6f 6d \|map%2Crevlog-com\|
	0090: 70 72 65 73 73 69 6f 6e 2d 7a 73 74 64 25 32 43 \|pression-zstd%2C\|			0090: 70 72 65 73 73 69 6f 6e 2d 7a 73 74 64 25 32 43 \|pression-zstd%2C\|
	00a0: 72 65 76 6c 6f 67 76 31 25 32 43 73 70 61 72 73 \|revlogv1%2Cspars\|			00a0: 72 65 76 6c 6f 67 76 31 25 32 43 73 70 61 72 73 \|revlogv1%2Cspars\|
	00b0: 65 72 65 76 6c 6f 67 25 32 43 73 74 6f 72 65 00 \|erevlog%2Cstore.\|			00b0: 65 72 65 76 6c 6f 67 25 32 43 73 74 6f 72 65 00 \|erevlog%2Cstore.\|
	00c0: 00 80 00 73 08 42 64 61 74 61 2f 30 2e 69 00 03 \|...s.Bdata/0.i..\|			00c0: 00 80 00 73 08 42 64 61 74 61 2f 30 2e 69 00 03 \|...s.Bdata/0.i..\|
	00d0: 00 01 00 00 00 00 00 00 00 02 00 00 00 01 00 00 \|................\|			00d0: 00 01 00 00 00 00 00 00 00 02 00 00 00 01 00 00 \|................\|
	00e0: 00 00 00 00 00 01 ff ff ff ff ff ff ff ff 80 29 \|...............)\|			00e0: 00 00 00 00 00 01 ff ff ff ff ff ff ff ff 80 29 \|...............)\|
	00f0: 63 a0 49 d3 23 87 bf ce fe 56 67 92 67 2c 69 d1 \|c.I.#....Vg.g,i.\|			00f0: 63 a0 49 d3 23 87 bf ce fe 56 67 92 67 2c 69 d1 \|c.I.#....Vg.g,i.\|
	#endif			#endif
				#if zstd dirstate-v2
				$ f --size --hex --bytes 256 body
				body: size=109449
				0000: 04 6e 6f 6e 65 48 47 32 30 00 00 00 00 00 00 00 \|.noneHG20.......\|
				0010: c0 07 53 54 52 45 41 4d 32 00 00 00 00 03 00 09 \|..STREAM2.......\|
				0020: 05 09 04 0c 85 62 79 74 65 63 6f 75 6e 74 39 35 \|.....bytecount95\|
				0030: 38 39 37 66 69 6c 65 63 6f 75 6e 74 31 30 33 30 \|897filecount1030\|
				0040: 72 65 71 75 69 72 65 6d 65 6e 74 73 64 6f 74 65 \|requirementsdote\|
				0050: 6e 63 6f 64 65 25 32 43 65 78 70 2d 64 69 72 73 \|ncode%2Cexp-dirs\|
				0060: 74 61 74 65 2d 76 32 25 32 43 66 6e 63 61 63 68 \|tate-v2%2Cfncach\|
				0070: 65 25 32 43 67 65 6e 65 72 61 6c 64 65 6c 74 61 \|e%2Cgeneraldelta\|
				0080: 25 32 43 70 65 72 73 69 73 74 65 6e 74 2d 6e 6f \|%2Cpersistent-no\|
				0090: 64 65 6d 61 70 25 32 43 72 65 76 6c 6f 67 2d 63 \|demap%2Crevlog-c\|
				00a0: 6f 6d 70 72 65 73 73 69 6f 6e 2d 7a 73 74 64 25 \|ompression-zstd%\|
				00b0: 32 43 72 65 76 6c 6f 67 76 31 25 32 43 73 70 61 \|2Crevlogv1%2Cspa\|
				00c0: 72 73 65 72 65 76 6c 6f 67 25 32 43 73 74 6f 72 \|rserevlog%2Cstor\|
				00d0: 65 00 00 80 00 73 08 42 64 61 74 61 2f 30 2e 69 \|e....s.Bdata/0.i\|
				00e0: 00 03 00 01 00 00 00 00 00 00 00 02 00 00 00 01 \|................\|
				00f0: 00 00 00 00 00 00 00 01 ff ff ff ff ff ff ff ff \|................\|
				#endif

	--uncompressed is an alias to --stream			--uncompressed is an alias to --stream

	#if stream-legacy			#if stream-legacy
	$ hg clone --uncompressed -U http://localhost:$HGPORT clone1-uncompressed			$ hg clone --uncompressed -U http://localhost:$HGPORT clone1-uncompressed
	streaming all changes			streaming all changes
	1027 files to transfer, 96.3 KB of data (no-zstd !)			1027 files to transfer, 96.3 KB of data (no-zstd !)
	transferred 96.3 KB in * seconds (*/sec) (glob) (no-zstd !)			transferred 96.3 KB in * seconds (*/sec) (glob) (no-zstd !)